Assembler jobs

Spacecraft Avionics Harness Technician

K2 SpaceLos Angeles, CAOn-site

$30–$42/hr listed by the employer

Key facts

Pay per year
≈ $62k–$87k
About the typical $73k a year for mid-level Assembler jobs in CaliforniaHow we compare

How we compare. ≈ $62k–$87k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 70 mid-level Assembler jobs in California that list pay, from the employers' own postings. About means within 5%.

Experience
3+ years

Looks real. 1 thing to check before you apply.

On K2 Space’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 8 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Fabricate wire harnesses from assembly drawings and electrical schematics.
  • Assemble, test, rework, route, and integrate harnesses and electromechanical assemblies for the satellite.
  • Follow assembly procedures and document completed work in the MES and other tools.
  • Assist engineering with production processes for first builds and support transition to full-rate production.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • IPC certification for PCB and cable harness rework (IPC-A-610, IPC-A-620) (preferred)

Experience

  • 3+ years of experience in cable harness fabrication, assembly, or integration
  • Experience in a manufacturing setting
  • Experience performing crimping, wire stripping, continuity testing, connector pin outs, routing, and tie wrapping
  • Experience using test and measuring tools, including a digital multimeter, caliper, and micrometer
  • Manufacturing experience in aerospace or electronics (preferred)
  • Hand soldering ability and PCB rework experience (preferred)
  • Experience with potting and encapsulation techniques for cables and enclosures (preferred)

Skills

  • Proficiency in MS Office suite and shop floor management software
  • Able to set up and use a torque wrench and other hand tools, such as wrenches and safety wire pliers
  • Familiar with ERP and part traceability
  • Ability to read, review, and redline electrical schematics and mechanical drawings (preferred)

On the job

  • Able to perform repetitive physical tasks including bending, twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and operating tools or machine controls
  • Able to lift and carry parts or equipment up to 50 lbs. unassisted
  • Able to stand for extended periods

Other requirements

  • Ability to adapt to changing work assignments under tight deadlines
  • Able to work extended hours and/or weekends as needed
  • Must be a U.S. person as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical coverage
Dental & vision
Dental and vision coverage
Parental leave
Paid parental leave
Equity
Equity in the company
Life & disability insurance
Life insurance

Also: paid time off

Full job description

From K2 Space’s careers site

K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space.

Show full descriptionShow less

The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits.

With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply.

The Role

You will contribute to the design, development, and testing of avionics components of major satellite subsystems. This role will support production and development of the K2 Mega-class satellite. You will assemble, test, rework, and integrate harnesses and electromechanical assemblies. Our ideal candidate will be a self-starter and have a high level of attention to detail to ensure quality and reliability of electrical components and systems.

Responsibilities

  • Fabricate wire harnesses from assembly drawings and electrical schematics
  • Assemble electromechanical assemblies and assist engineering with the development of production processes for first time builds
  • Follow work instructions / assembly procedures and document work performed through MES system and other tools
  • Work side-by-side with design and manufacturing engineering in a fast-paced environment
  • Route harnesses and support integration of electromechanical assemblies on the Mega-class satellite
  • Support production transition from engineering development and initial production to full rate production
  • Provide consistent process improvement feedback to engineering and production leadership

Qualifications

  • 3+ years of experience in cable harness fabrication, assembly, or integration
  • Experience in a manufacturing setting, preferably in aerospace or electronics
  • Proficiency in MS Office suite, and shop floor management software
  • Demonstrate high level of ownership and problem-solving abilities
  • Able to set up and use a torque wrench and other hand tools such as: wrenches and safety wire pliers
  • Experience performing crimping, wire stripping, continuity testing, connector pin outs, routing, and tie wrapping
  • Experience using test and measuring tools (digital multimeter, caliper, micrometer)
  • Familiar with ERP and part traceability
  • Ability to adapt to changing work assignments under tight deadlines

Nice to Have

  • IPC Certified for PCB and cable harness rework (IPC-A-610, IPC-A-620)
  • Hand soldering ability and PCB rework experience
  • Ability to read, review, and redline electrical schematics and mechanical drawings
  • Experience with various potting and encapsulation techniques for cables and enclosures
  • Strong communication skills with ability to communicate hardware and systems problems

Additional Requirements

  • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or machine controls
  • Must be able to lift and carry parts or equipment up to 50 lbs. unassisted
  • Must be able to stand for extended periods of time
  • Must be able to work extended hours and/or weekends as needed

Compensation and Benefits:

  • Hourly pay range for this non-exempt role is $30– $42 + equity in the company
  • Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level
  • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks

If you don’t meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged!

Export Compliance

As defined in the ITAR, “U.S. Persons” include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a “U.S. Person.”

The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a “U.S. person” as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license.

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know.

Equal Opportunity

K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Mechanisms Technician

Valar Atomics · Torrance, CA

$40–$50/hrOn-site

StrongChecked open todayPosted 1 month ago

Apprentice Technician

True Anomaly · Long Beach, CA

$24–$33/hrOn-site

StrongChecked open todayPosted 1 month ago

See more like this