Assembler jobs

Mechanical Spacecraft Technician (I–III)

True AnomalyLong Beach, CAOn-sitePosted 1 month ago

$26.50–$36.00/hr listed by the employer

Key facts

Pay per year
≈ $55k–$75k
Below the typical $73k a year for mid-level Assembler jobs in CaliforniaHow we compare

How we compare. ≈ $55k–$75k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 70 mid-level Assembler jobs in California that list pay, from the employers' own postings. About means within 5%.

Experience
3+ years
US visa
No US visa sponsorship

Strong: looks real and checked open today.

On True Anomaly’s own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Assemble, install, and inspect spacecraft mechanical hardware using engineering drawings, work instructions, and process documentation.
  • Prepare and handle flight hardware; perform precision assembly, integration, fit checks, dimensional inspections, and spacecraft closeouts.
  • Set up and support mechanical functional, deployment, alignment, mass properties, vibration, acoustic, and thermal vacuum testing; document results.
  • Identify and document discrepancies, support investigations and troubleshooting, and work with engineering and quality teams to resolve issues.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Certifications in mechanical assembly, rigging, machining, composites, or cleanroom operations (preferred)

Experience

  • Relevant experience in spacecraft, aerospace, defense, automotive, precision manufacturing, or another high-reliability mechanical assembly environment
  • Experience assembling and integrating mechanical structures, mechanisms, brackets, panels, fasteners, or related hardware
  • Experience using hand tools, torque tools, precision measurement equipment, and mechanical test equipment
  • Experience with mechanical alignment, dimensional inspection, shimming, bonding, staking, or safety wiring
  • Experience working in ESD-sensitive, FOD-critical, and cleanroom environments
  • Spacecraft or satellite mechanical assembly and integration (preferred)
  • Experience with primary and secondary spacecraft structures (preferred)
  • Experience with mechanical mechanisms, deployment systems, hinges, latches, or release devices (preferred)
  • Experience supporting vibration, acoustic, thermal vacuum, or other environmental testing (preferred)
  • Experience with lifting and handling flight hardware (preferred)
  • Experience with composite structures, lightweight materials, or additive-manufactured hardware (preferred)
  • Experience using coordinate measuring machines, laser trackers, optical tooling, or other alignment equipment (preferred)

Education

  • Technical degree, certificate, apprenticeship, or equivalent training in mechanical, aerospace, manufacturing, or a related field

Skills

  • Proficiency reading engineering drawings, schematics, work instructions, process sheets, and assembly procedures
  • Ability to follow detailed procedures and maintain accurate build, inspection, and test documentation
  • Precision alignment and dimensional inspection (preferred)
  • Torque application, safety wiring, staking, shimming, and mechanical fastening (preferred)
  • Structural bonding, potting, or adhesive application (preferred)
  • Familiarity with GD&T and mechanical inspection practices (preferred)

On the job

  • Ability to lift 25 pounds and work in and around constrained or confined spaces

Other requirements

  • Fully onsite work at the Centennial, Colorado office
  • U.S. citizenship, lawful permanent residency, protected individual status, or eligibility to obtain required U.S. Department of State authorizations

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
100% company-paid medical coverage for employees and dependents, with HSA/HRA options
Dental & vision
100% company-paid dental and vision coverage for employees and dependents
Retirement plan
401(k) retirement plan
Paid time off
Flexible Time Off for exempt employees; accrued PTO of up to 25 days for non-exempt employees; 12 paid holidays; sick leave
Equity
Equity participation included in the total compensation package
Wellness & mental health
Fitness reimbursement
Meals
Daily catered lunch and unlimited snacks for in-office employees
Other
Dog Fridays

Also: parental leave

Full job description

From True Anomaly’s careers site

Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.

OUR MISSION

True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.

OUR VALUES

  • Be the offset. We create asymmetric advantages with creativity and ingenuity.
  • What would it take? We challenge assumptions to deliver ambitious results.
  • It’s the people. Our team is our competitive advantage and we are better together.

BENEFITS & PERKS*

Show full descriptionShow less
  • Best-in-class healthcare: 100% company-paid medical, dental, and vision coverage for you and your dependents, with HSA/HRA options
  • Generous time off: Flexible Time Off (FTO) for exempt employees, accrued PTO of up to 25 days for non-exempt employees, plus 12 paid holidays; Parental Leave; Sick Leave
  • Fuel for your day: Daily catered lunch and unlimited snacks for in-office employees
  • And more: 401(k) retirement plan, fitness reimbursement, and Dog Fridays
  • Equity participation: Equity is included as part of our total compensation package, giving you an opportunity to share in the company’s success.

*Do not apply to fixed term and temporary roles

YOUR MISSION

As a Mechanical Spacecraft Technician, you will play a vital role in the assembly, integration, and testing of spacecraft mechanical systems. You will collaborate with engineering, manufacturing, and quality teams to build spacecraft hardware from early development through environmental testing, flight readiness, and production ramp. This role may be leveled from Technician I to Technician III based on experience, skills, and demonstrated proficiency.

RESPONSIBILITIES Mechanical Assembly: Build, install, and inspect spacecraft mechanical hardware—including primary and secondary structures, panels, brackets, payloads, mechanisms, deployables, thermal hardware, fasteners, and support equipment—using engineering drawings, work instructions, and process documentation. Component Preparation and Handling: Prepare, clean, protect, and handle flight and flight-like hardware. Perform precision assembly operations including torqueing, safety wiring, staking, bonding, shimming, alignment, and mechanical fastening while maintaining hardware traceability and configuration control. Spacecraft Integration: Support the integration of mechanical subsystems and components into spacecraft structures. Install and route hardware, perform fit checks and dimensional inspections, and support closeouts and access panel installation. Testing and Validation: Support mechanical functional testing, deployment testing, alignment checks, mass properties measurements, vibration testing, acoustic testing, thermal vacuum testing, and other environmental test activities. Set up test hardware and fixtures, follow approved procedures, and accurately record results. Inspection and Troubleshooting: Perform visual, dimensional, and workmanship inspections. Identify and document hardware discrepancies, support nonconformance investigations, and work with engineering and quality teams to resolve assembly and integration issues. Tooling and Ground Support Equipment: Operate and maintain hand tools, torque tools, precision measurement equipment, lifting equipment, assembly fixtures, and mechanical ground-support equipment. Support the development and improvement of tooling and work instructions. Safety and Compliance: Follow requirements for FOD prevention, ESD control, cleanroom operations, hazardous materials, lifting and handling, contamination control, and safe work around energized and flight hardware. Continuous Improvement: Provide feedback on assembly processes, drawings, work instructions, tooling, and manufacturing methods to improve safety, quality, repeatability, and schedule performance.

QUALIFICATIONS

  • Technical degree, certificate, apprenticeship, or equivalent training in mechanical, aerospace, manufacturing, or a related field.
  • Relevant experience in spacecraft, aerospace, defense, automotive, precision manufacturing, or other high-reliability mechanical assembly environments.
  • Experience assembling and integrating mechanical structures, mechanisms, brackets, panels, fasteners, or related hardware.
  • Proficiency reading engineering drawings, schematics, work instructions, process sheets, and assembly procedures.
  • Experience using hand tools, torque tools, precision measurement equipment, and mechanical test equipment.
  • Experience with mechanical alignment, dimensional inspection, shimming, bonding, staking, or safety wiring.
  • Experience working in ESD-sensitive, FOD-critical, and cleanroom environments.
  • Ability to follow detailed procedures and maintain accurate build, inspection, and

test documentation.

  • Ability to work autonomously and collaboratively in a multidisciplinary team.
  • Strong written and verbal communication skills.
  • Ability to lift 25 pounds and work in and around constrained or confined spaces.

LEVELING GUIDANCE Technician I: Develops proficiency in spacecraft mechanical assembly, hardware handling, documentation, and inspection while working under regular guidance. Typically has 0–1 years of relevant experience or equivalent technical training. Technician II: Independently performs a broad range of mechanical assembly, integration, inspection, and test activities. Troubleshoots common issues and supports process improvements and peer training. Typically has 1–3 years of relevant experience. Technician III: Performs complex mechanical assembly, integration, troubleshooting, and testing with limited supervision. Serves as a technical resource for other technicians and supports development hardware, environmental testing, flight readiness, and production ramp. Typically has 3+ years of relevant experience or equivalent demonstrated proficiency.

PREFERRED SKILLS

  • Spacecraft or satellite mechanical assembly and integration
  • Experience with primary and secondary spacecraft structures
  • Mechanical mechanisms, deployment systems, hinges, latches, or release devices
  • Precision alignment and dimensional inspection
  • Torque application, safety wiring, staking, shimming, and mechanical fastening
  • Structural bonding, potting, or adhesive application
  • Experience supporting vibration, acoustic, thermal vacuum, or other environmental testing
  • Experience with lifting and handling flight hardware
  • Familiarity with GD&T and mechanical inspection practices
  • Experience with composite structures, lightweight materials, or additive-manufactured hardware
  • Experience using coordinate measuring machines, laser trackers, optical tooling, or other alignment equipment
  • Relevant certifications in mechanical assembly, rigging, machining, composites, or cleanroom operations

COMPENSATION

  • Base Salary:
  • Technician I : $26.50-$36/hr
  • Technician II: $31.50-$41.50/hr
  • Technician III: $36-50.50/hr
  • *this position is non-exempt and is eligible for overtime
  • Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience.

ADDITIONAL REQUIREMENTS

  • Work Location—this a fully onsite position based out of our Centennial, CO office.
  • Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
  • Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us know.

To protect candidates and our company from application fraud and impersonation, we use third-party tools to verify applicant identity and detect fraudulent applications. Learn more in our Privacy Notice.

Something wrong with this job? Report it

Similar jobs nearby

Mechanisms Technician

Valar Atomics · Torrance, CA

$40–$50/hrOn-site

StrongChecked open todayPosted 1 month ago

Apprentice Technician

True Anomaly · Long Beach, CA

$24–$33/hrOn-site

StrongChecked open todayPosted 1 month ago

See more like this