Engineering jobs

Senior Motor Controls Engineer

Lab37Pittsburgh, PAFull-timeOn-sitePosted 21 days ago

$158k–$218k/yr listed by the employer

Strong: looks real and checked open today.

On Lab37’s own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Recommend and evaluate motor and drive options with mechanical, electrical, and test engineers; implement and validate cost-effective control strategies.
  • Develop, integrate, and tune BLDC/PMSM and stepper controls, selecting between commercial drives, controller ICs, and custom firmware.
  • Evaluate control strategies and quantify performance, cost, and reliability tradeoffs; establish operating limits and margins.
  • Run instrumented experiments and automated tests, analyze measurements, and diagnose issues across controls, electronics, firmware, and mechanics.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Ownership of motor-control solutions from development through production or sustained real-world operation
  • Hands-on BLDC/PMSM control and practical stepper experience
  • Assess feasibility, quantify tradeoffs, explain when a control strategy or hardware change is justified, and implement the agreed solution
  • Communicate risks early, follow failures through to prevention, collaborate across disciplines, and leave behind useful tools and knowledge
  • Designing and delivering custom motor controllers or servo drives from the ground up, including hardware architecture, embedded firmware, control algorithms, production validation, and support (preferred)
  • Experience with robotics, appliances, food equipment, or other cost-sensitive electromechanical products with demanding duty cycles and field-service needs (preferred)

Skills

  • Applied controls fundamentals: motor physics, commutation and FOC, feedback selection, discrete-time control, loop stability and tuning, saturation, and effects of friction, backlash, compliance, ands
  • Hands-on embedded C/C++ capability and ability to bring up and debug motor-control hardware
  • Ability to reason about PWM/ADC timing, current sensing, encoders, real-time execution, and motor-driver interfaces
  • Use motion data, analysis tools, and oscilloscopes to test hypotheses, quantify margins, and distinguish electrical, mechanical, and software issues
  • CAN/CANopen or comparable industrial drive interfaces (preferred)
  • Motor power-stage integration, regenerative-energy management, or EMC troubleshooting (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance with multiple plan options, including HSA options; Health Savings Account (HSA), Flexible Spending Accounts for healthcare and dependent care
Dental & vision
Dental and vision insurance with multiple plan options
Retirement plan
401(k)
Paid time off
Discretionary vacation days, 8 paid holidays per year, paid sick time, and paid bereavement leave
Parental leave
Paid parental leave
Equity
May be eligible for equity awards
Bonus
May be eligible for an annual performance-based bonus
Life & disability insurance
Company-paid life and short- and long-term disability insurance, Voluntary accident, critical illness, and hospital indemnity insurance; optional supplemental life insurance for employee, spouse, and children; pet insurance discount
Commuter benefits
Commuter Flexible Spending Account

Full job description

From Lab37’s careers site

Who we are

Lab37 Robotics, is a technology company focused on the development and deployment of robots designed specifically for direct-to-customer food production. Our mission is to revolutionize the food industry by creating innovative robotic solutions that enhance efficiency, quality, and customer satisfaction. We are passionate about pushing the boundaries of technology to deliver cutting-edge products that meet the evolving needs of our clients.

About the role

We build robots that prepare and assemble food in real production environments. We’re looking for a Senior Motor Controls Engineer to help define how our mechanisms move—and make those decisions work reliably in production.

Show full descriptionShow less

You’ll explore how control strategies can improve the performance, reliability, and cost of robotic mechanisms. Working with a multidisciplinary team, you’ll assess what is possible, make the tradeoffs clear, and turn promising approaches into robust, supportable implementations.

You will be our primary motor-controls specialist within a team of mechanical, electrical, test, embedded, and robot software engineers. You’ll guide motor and actuation decisions alongside the mechanical engineering team, own the controls implementation, and collaborate across disciplines to validate performance and improve reliability.

What you’ll do

  • Partner with mechanical, electrical, and test engineers to recommend and evaluate motor and drive options. Determine when a different control strategy can meet performance and reliability requirements with a smaller or lower-cost actuator, then implement and validate the approach.
  • Develop, integrate, and tune BLDC/PMSM and stepper control, including current/torque, velocity, and position loops. Choose appropriately between commercial drives, controller ICs, and custom firmware.
  • Evaluate alternative control strategies and quantify their performance, cost, and reliability tradeoffs. Establish operating limits and margins with the team, and carry promising approaches through implementation and validation.
  • Work with test, mechanical, and electrical engineers on instrumented experiments and automated tests. Contribute controls-specific measurements and analysis to characterize performance and validate behavior across operating conditions and component variation.
  • Diagnose issues across controls, electronics, firmware, and mechanics—from resonance and lost motion to feedback errors, overheating, and intermittent faults—and drive corrective changes.
  • Make systems easier to commission and support through calibration tools, validated configurations, useful telemetry, fault handling, design guidance, and clear documentation.

What we are looking for

  • Demonstrated ownership of motor-control solutions from development through production or sustained real-world operation, including hands-on BLDC/PMSM control and practical stepper experience.
  • Strong applied controls fundamentals: motor physics, commutation and FOC, feedback selection, discrete-time control, loop stability and tuning, saturation, and the effects of friction, backlash, compliance, and resonance.
  • Hands-on embedded C/C++ capability and the ability to bring up and debug motor-control hardware. You can reason about PWM/ADC timing, current sensing, encoders, real-time execution, and motor-driver interfaces.
  • An experimental approach: you use motion data, analysis tools, and oscilloscopes to test hypotheses, quantify margins, and distinguish electrical, mechanical, and software issues and causes.
  • Independent engineering judgment and collaborative decision-making. You can assess feasibility, quantify tradeoffs, explain when a control strategy or hardware change is justified, and implement the agreed solution.
  • Clear communication and durable ownership. You surface risks early, follow failures through to prevention, collaborate across disciplines, and leave behind tools and knowledge that make others effective.

Helpful, but not required

  • Experience designing and delivering custom motor controllers or servo drives from the ground up, including hardware architecture, embedded firmware, control algorithms, and production validation and support.
  • CAN/CANopen or comparable industrial drive interfaces; motor power-stage integration, regenerative-energy management, or EMC troubleshooting.
  • Robotics, appliances, food equipment, or other cost-sensitive electromechanical products with demanding duty cycles and field-service needs.
  • We value demonstrated engineering results and sound judgment over a particular degree, vendor ecosystem, or exact number of years of experience.

Why join us

  • Demand for online food delivery is growing really fast! In the last 5 years, just in the US, the overall market has expanded 10X from $10B to $100B, and could expand to $500bn- $1T by 2030.
  • Changing the restaurant industry: You’ll be part of a team that helps restaurants succeed in online food delivery.
  • Collaborative environment: You will receive support and guidance from experienced colleagues and managers, helping you to learn, grow and achieve your goals, and you’ll work closely with other teams to ensure our customer’s success.

What else you need to know

This role is based in our Pittsburgh office. As a company driven by invention and continuous change - we are constantly reimagining our industries, building new products, and refining how we operate. We do our best work together. That’s why all of our office-based teams work onsite, five days a week.

The base salary range for this role is $158,000 - $218,000 per year.

Actual compensation will be determined on an individual basis and may vary depending on experience, skills, and qualifications.

Base salary is just one part of your total rewards package. You may also be eligible for equity awards and an annual performance-based bonus.

Benefits Summary (USA Full-Time Exempt Employees):

  • Medical, dental, and vision insurance (multiple plans, incl. HSA options).
  • Company-paid life and disability insurance (short- and long-term).
  • Voluntary insurance: accident, critical illness, hospital indemnity.
  • Optional supplemental life insurance for self, spouse, and children.
  • Pet insurance discount.
  • 401(k).
  • Health Savings Account (HSA)
  • Flexible Spending Accounts (Healthcare, Dependent Care, Commuter)
  • Time Off policies:
  • Discretionary vacation days
  • 8 paid holidays per year
  • Paid sick time
  • Paid Bereavement leave
  • Paid Parental Leave

Benefits are subject to change at the company's discretion. Atoms accepts applications on an ongoing basis.

Ready to join us as we serve those who serve others?

#LI-Onsite

Something wrong with this job? Report it

Similar jobs

Senior Engineer

Motional · Pittsburgh, PA

$121k–$170k/yr

StrongChecked open todayPosted 9 days ago

Controls Engineer

Associated Metal Forming Technologies · Corry, PA

$100k–$110k/yrFull-timeOn-site

StrongChecked open todayPosted 20 days ago

Equipment Engineer IV

FirstEnergy · Towanda, PA +2 places

$108k–$131k/yrOn-site

StrongChecked open todayPosted 5 days ago

Senior Architect

WSP · Arlington, VA +8 places

$102k–$149k/yr

StrongChecked open todayPosted 8 days ago

See more like this