Pennsylvania jobs

Senior Estimator

Hill Minimal 112022Philadelphia, PA +10 placesPosted 11 days ago

Pay not listed

Key facts

Where
Philadelphia, PA · Plymouth Meeting, PA · Pittsburgh, PA · Columbus, OH · Cleveland, OH · Toledo, OH · New York, NY · Washington, DC · Jacksonville, FL · Miami, FL · Orlando, FL
Experience
15+ years

This job is closed.

The employer took it down 7 days ago, after 2 days open. Here are similar open jobs.

  • To check: No pay range listed, though one is likely required in Cleveland, OH, DC, NYAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteOracle Recruiting board
  • Checked: No reposts foundOracle Recruiting board
  • Note: Last seen open 8 days agoLive check
  • Trust score 89 / 100 · Looks good
Posting history
  1. Posted Nov 11, 2026 · taken down Nov 13, 2026
  2. Reposted #1 Nov 13, 2026
See all 5 checksShow fewer
How we check

Similar open jobs

Senior Estimator

Arcadis · Phoenix, AZ +3 places

$111k–$166k/yr

StrongChecked open todayPosted 16 days ago

Senior Estimator

F.H. Paschen · McLean, VA

$150k–$250k/yrFull-time

StrongLast seen open yesterdayPosted 17 days ago

Senior Estimator I

Mortenson · United States

$128k–$192k/yrOn-site

StrongChecked open todayPosted 1 month ago

Senior Estimator

TruBlue Home Service Ally · Phoenix, AZ

Full-timeOn-site

StrongPay not listedChecked open todayPosted 20 days ago

Senior Estimator

1 Resource Group · Remote · US only

Contract

StrongPay not listedLast seen open yesterdayPosted 1 month ago

Senior Estimator

Enterprise Electrical · Phoenix, AZ

Full-timeOn-site

StrongPay not listedLast seen open yesterdayPosted 1 month ago

See more like this

What you’ll do

  • Prepare civil, structural, and architectural quantity take-offs and cost estimates from conceptual through construction-document phases.
  • Develop estimate structures, unit costs, labor and crew rates, markups, escalation forecasts, risk registers, contingencies, and Basis of Estimate documentation.
  • Review third-party estimates and subcontractor or vendor quotes; reconcile quantities and evaluate bids and change orders.
  • Prepare value analysis and value engineering estimates, and present estimate assumptions and results in review meetings.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 15+ years of construction cost estimating experience
  • Experience across conceptual, schematic, design development, and construction document phases
  • Experience developing burdened labor rates and composite crew rates, including correct treatment of payroll taxes and insurances
  • Experience building escalation forecasts from published index data and Risk Registers with Low-Mean-High contingency justification
  • A mixture of field and consulting/estimating experience (preferred)
  • Aviation, Rail and Transit, DOT, Water/Wastewater Treatment, and/or Industrial Manufacturing project experience (preferred)

Education

  • BA/BS in Engineering, Construction Management, or a related field (preferred)

Skills

  • Strong conceptual estimating skills with limited information
  • General knowledge of estimating techniques, cost control, and material pricing
  • Ability to read and understand engineering drawings, purchase orders, contracts, and cost coding systems
  • Intermediate to advanced understanding of civil, structural, and architectural building systems
  • Ability to decompose parametric unit prices into labor, material, and equipment components
  • Proficiency with Microsoft Office Suite
  • Proficiency with On-Screen Takeoff, Bluebeam Revu, WinEst, Destini Estimator, Accubid, RS Means, or Timberline/Sage (preferred)

Other requirements

  • Ability to build strong internal and external relationships with clients, design consultants, subcontractors, suppliers, and staff

Benefits

Health insurance
Medical insurance; Flexible Spending Account; Health Savings Account; Dependent Care Flexible Spending Account
Dental & vision
Dental and vision insurance
Retirement plan
401(k) Retirement Savings Plan
Paid time off
Paid Time Off (PTO) and holidays
Learning & tuition
Professional Certification Incentive Program; Hill University Learning and Development; Tuition Reimbursement
Wellness & mental health
Employee Assistance Program (EAP)
Life & disability insurance
Employer-paid Life and Accidental Death & Dismemberment Insurance; Business Travel Accident Insurance; Short-Term Disability; Long-Term Disability; Voluntary Life and Accidental Death & Dismemberment, Legal Assistance; Identity Theft Protection; Pet Insurance; Auto & Home Insurance; Critical Illness Insurance; Accident Insurance; Hospital Indemnity Insurance
Other
Employee Referral Program; Years of Service Awards Program

Also: commuter benefits

Full job description

From Hill Minimal 112022’s careers site

Hill International is seeking an experienced Senior CSA Estimator to join our East Coast team

The Senior CSA Estimator will provide civil, structural, and architectural cost expertise across all phases of project design. They will produce accurate quantity take-offs and estimates calibrated to the level of design and specification completeness at each estimating stage — from conceptual/order-of-magnitude through fully detailed construction document estimates.

Show full descriptionShow less

This role combines hands-on estimating, third-party estimate review, client and senior-management interaction, and mentorship of junior staff. A core expectation is the judgment to apply the appropriate level of detail, methodology, contingency, and documentation that each design stage warrants.

  • Perform quantity take-offs and prepare estimates from conceptual/order-of-magnitude through fully detailed Construction Document (CD) estimates, applying the level of detail, methodology, and documentation appropriate to each design phase.
  • Follow Hill's estimate workflow across intake and scope control, estimate type/structure/quantity development, direct cost and markup development, and Basis of Estimate, reporting, review, and close-out.
  • Verify that progress drawings, specifications, and the estimate request package have actually reached the design maturity at which they are declared, and raise gaps in writing before estimating begins.
  • Organize estimates in a Uniformat work breakdown structure (WBS) with defensible Location/System/Subsystem/Element coding, tree-level quantities, and supplemental coding fields (bid item, schedule item, client accounting, or agency-specific codes) as required by the project.
  • Develop assemblies at the lowest WBS level with complete database references, labor hours, labor/material/equipment unit costs, and direct cost — never entering a unit price that cannot be decomposed on request.
  • Develop burdened labor rates and composite crew rates in accordance with standard methodology, ensuring payroll taxes and insurances are applied correctly and never to fringe benefits or non-labor items.
  • Develop and apply subcontractor and general contractor markups, General Conditions, and General Requirements as transparent, itemized, unit-of-measure-based line items — never as an unsupported percentage of direct cost.
  • Build escalation forecasts from published cost index data (e.g., BLS series) mapped to the project schedule, rather than a single compounded opinion.
  • Develop and maintain the project Risk Register across all applicable categories (external, management, operational, and design/estimating allowances), with Low-Mean-High values and assigned owners, and use it — not a flat percentage — to justify contingency.
  • Prepare a defensible Basis of Estimate documenting scope inclusions/exclusions, assumptions, methodology, quality control performed, and reference documents used.
  • Review third-party and Independent Cost Estimator (ICE) submissions for completeness, transparency, and uniformity; participate in quantity reconciliation between in-house and third-party estimates.
  • Evaluate and level subcontractor and vendor quotes, bid information, and change orders; assist in evaluating large change orders and verifying entitlement.
  • Develop, prepare, and review value analysis / value engineering estimates and alternatives.
  • Participate in estimate review and reconciliation meetings, presenting and defending assumptions, methodology, and results to clients, design teams, and review bodies.
  • Attend project meetings, kick-off meetings, and site investigations as assigned; assist in developing the project's estimate quality control plan (EQCP) and adhere to it on every deliverable.
  • Coordinate with the broader Hill estimating team as a resource and reviewer for other estimators' take-offs and deliverables.
  • Maintain proficiency with, and help maintain, Hill's estimating and quantity survey software platforms.
  • Demonstrate effective leadership and mentor and develop Estimators and Junior Estimators.
  • Prepare accurate quantification and unit costs for the civil, structural, and architectural CSI Divisions (02–10, 12, 31–35) of assigned projects, with well-organized detail and defensible baseline unit pricing.
  • Take off sitework and earthwork (clearing, grubbing, cut/fill balance, haul, subgrade preparation, compaction) with a shrink/swell factor stated and reconciled to a cut/fill diagram.
  • Take off underground utilities (storm, sanitary, water, joint trench), trench sections, shoring, dewatering, bedding, and backfill.
  • Decompose concrete assemblies into formwork (SFCA), reinforcing tonnage, PSI class, and finish — never priced as a single blended $/CY.
  • Take off structural steel and miscellaneous metals by tonnage, connection type, and erection crew, including crane selection.
  • Take off deep foundations (driven pile, drilled shaft, CIDH, micropile, ground improvement) with stated production rates and mobilization.
  • Take off architectural systems — envelope, roofing, glazing/curtain wall, partitions, finishes, specialties, and conveying systems (elevators by stop count, speed, and capacity).
  • Price temporary works (shoring, falsework, cofferdams, MOT staging, crane pads, laydown) as itemized General Requirements — never absorbed into a unit rate.
  • Build crews for civil and structural work: excavator/loader/haul truck crews, form crews, rebar crews, iron-worker crews.
  • BA/BS in Engineering, Construction Management, or a related field preferred.
  • 15+ years of construction cost estimating experience, with experience across conceptual, schematic, design development, and construction document phases.
  • A mixture of field and consulting/estimating experience preferred.
  • Strong conceptual estimating skills with limited information, and the professional judgment to determine the level of detail each design stage warrants.
  • General knowledge of estimating techniques, cost control, and material pricing; ability to read and understand engineering drawings, purchase orders, contracts, and cost coding systems (e.g., CSI MasterFormat/UniFormat, agency bid item schedules).
  • Proficiency with estimating and take-off software such as On-Screen Takeoff, Bluebeam Revu, WinEst, Destini Estimator, Accubid, RS Means, or Timberline/Sage preferred.
  • Intermediate to advanced understanding of civil, structural, and architectural building systems sufficient to recognize relative costs and identify design gaps.
  • Aviation, Rail and Transit, DOT, Water/Wastewater Treatment, and/or Industrial Manufacturing project experience preferred.
  • Ability to decompose any parametric unit price into its constituent labor, material, and equipment components on demand.
  • Experience developing burdened labor rates and composite crew rates, including correct treatment of payroll taxes and insurances.
  • Experience building and defending an escalation forecast from published index data (e.g., BLS series) and a Risk Register with Low-Mean-High contingency justification.
  • Ability to build strong internal and external relationships with clients, design consultants, subcontractors, suppliers, and Hill staff.
  • Effective written and verbal communication, leadership, and mentoring capabilities.
  • Proficiency with Microsoft Office Suite.

Depending upon your employment status, Hill’s comprehensive benefits may include, Medical, Dental, Vision, Employer Paid Life and Accidental Death & Dismemberment Insurances, Business Travel Accident Insurance, Short-Term Disability, Long Term Disability, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Commuter Benefits, Legal Assistance, Identity Theft Protection, Pet Insurance, Auto & Home Insurance, Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Voluntary Life & Accidental Death & Dismemberment Insurance. Paid Time Off (PTO), Holidays, 401(K) Retirement Savings Plan, Employee Referral Program, Professional Certification Incentive Program, Hill University Learning and Development, Tuition Reimbursement, EAP, Years of Service Awards Program.

Something wrong with this job? Report it · This flag looks wrong