Engineering jobs

Controls Engineer Factory Automation

1XSan Carlos, CAFull-timeOn-site5+ years experiencePosted 4 days ago

$140k–$220k/yr listed by the employer

Looks real and checked open today.

On 1X’s own careers site (Ashby).

Trust score ready Nov 23

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 23
See all 4 checksShow fewer
How we check

What you’ll do

  • Specify and build factory controls systems, selecting components and taking systems from concept through deployment and production use.
  • Deploy, commission, optimize, troubleshoot, and maintain automated equipment and PLC-driven stations.
  • Build PLC programs and controls integrations, and establish and maintain factory SCADA, historian, and data-system connections.
  • Define facility controls standards for code, networks, HMIs, version control, and documentation.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of controls or automation engineering experience in a manufacturing or production environment
  • Track record of deploying, commissioning, and supporting automated equipment through its lifecycle
  • Experience speccing and building controls systems in-house, including sensor and component selection, electrical design, panel build, and bring-up
  • Working experience with industrial networking, including Ethernet/IP and EtherCAT
  • Experience designing and deploying SCADA, historian, or factory data logging systems in a production environment
  • Experience defining or significantly contributing to controls standards across multiple pieces of equipment
  • Siemens PLC experience (TIA Portal / Step 7) (preferred)
  • Experience integrating factory systems with MES and ERP platforms (Odoo or comparable) (preferred)
  • Experience commissioning vendor-supplied automation and managing third-party integrators through deployment and handoff (preferred)
  • Experience with containerization, version control (Git), and modern software practices applied to factory systems (preferred)
  • Exposure to humanoid robotics, prosthetics, surgical robotics, or other high-mix precision manufacturing environments (preferred)
  • Experience scaling controls and data systems across multiple production areas or shifts (preferred)

Skills

  • Strong PLC programming experience
  • Proficiency in Python and/or C++ for scripting, data acquisition, and system integration
  • Comfort working in Linux environments, including command line, scripting, services, and basic sysadmin
  • Ability to design, configure, and troubleshoot industrial networks
  • Strong documentation habits across code, electrical schematics, network diagrams, and operator-facing HMIs
  • Familiarity with safety-rated controls, including safety PLCs, light curtains, interlocks, and relevant standards (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive medical coverage; Flexible Spending Account (FSA) and Health Savings Account (HSA) options
Dental & vision
Comprehensive dental and vision coverage
Retirement plan
401(k) plan with company match: 100% on the first 3% of contributions and 50% on the next 2%
Paid time off
Generous paid time off and company holidays
Wellness & mental health
Employee Assistance Program (EAP) for mental health, financial, and personal support
Life & disability insurance
Short-term and long-term disability and life insurance
Commuter benefits
Transit and parking benefits
Meals
Onsite snacks and catered lunches

Also: parental leave, equity

Full job description

From 1X’s careers site

ABOUT 1X

We’re building humanoid robots that work in home — doing the chores, handling the tasks, and giving people their time back. Simple, but it’s not.

To do this right, we have to solve robotics, AI, manufacturing — at the same time, at scale, in a form factor that has to be safe enough to live with your family. If you’re inspired by this, you’ll thrive here. We’ve been at this since 2014 and we’re at the point where the hard problems are behind us and the hard work is in front of us.

NEO is our flagship — a home robot designed to move, learn, and operate in the real world alongside real people. We’re not demoing it — we’re shipping it. We’re excited to meet you, if this excites you.

Show full descriptionShow less

If you’ve spent your career working on problems that matter and want to see them actually reach the world — this is that moment. We’re scaling, we’re hiring with intention, and we need people who want to build something that will genuinely change how humans spend their time — safely creating abundance for all.

ABOUT THE TEAM

The Manufacturing Engineering team owns how NEO gets built — from prototype through volume production. We design the processes, fixtures, and standards that turn engineering intent into a manufacturable reality, and we partner across design, quality, NPI, supply chain, and the production floor to make sure what leaves the line is precise, repeatable, and reliable. Factory controls is the connective tissue that makes the line run — the automation, PLCs, and data systems that keep production moving and give us the visibility we need to improve it.

YOUR CHARTER

You’ll own factory controls and automation across the San Carlos manufacturing floor. As the Senior Controls Engineer, you spec and build controls systems in-house, and you deploy, commission, and optimize the automated equipment and PLC-driven systems that production runs on. You build out the PLCs and controls integration that bring new equipment online, and you stand up the factory SCADA and historian backbone that turns what happens on the line into information we can share broadly across the organization. You also define the controls standards that the rest of the facility is built to. Test station design lives with our Manufacturing Test team; you partner with them on controls integration. This is where mechanical process and software come together — the systems you stand up are what make the difference between a line that runs and a line we can actually improve.

KEY OUTCOMES

  • Spec and build controls systems in-house — select sensors, actuators, PLCs, I/O, drives, and networking components, and bring the resulting systems from concept through build, deployment, and production use
  • Deploy, commission, and optimize automated equipment and PLC-driven stations across the San Carlos production areas — getting new equipment online, dialed in, supported through its lifecycle, and continuously improved as production needs evolve
  • Build and maintain the PLC programs and controls integration that support incoming equipment — from vendor-supplied automation through in-house builds and third-party integrators
  • Stand up and maintain the factory SCADA and historian stack — define what gets captured, how it’s structured, and how that information is shared broadly across the organization
  • Define and maintain the controls standards for the facility — PLC code structure, naming conventions, network architecture, HMI patterns, version control, and documentation practices that every piece of equipment on the floor is held to
  • Build and support the scripting, services, and integrations that connect factory equipment to our data systems, MES, and ERP
  • Own the reliability of deployed controls systems: uptime, troubleshooting, change management, and the standards that keep them maintainable as the floor scales
  • Partner with the Manufacturing Test team on controls integration for test stations, and with ME and production on automation strategy, equipment selection, and commissioning plans

KEY COMPETENCIES

  • Fluent in PLC programming and industrial controls architecture — comfortable taking vendor equipment, in-house builds, and third-party integrations from install through commissioning to long-term support
  • Strong hands-on instinct for speccing and building controls systems — selects the right sensor, actuator, drive, or PLC for the job and knows why the alternatives don’t fit
  • Strong software instincts outside the PLC — scripts, services, and small applications that glue factory systems together and move data where it needs to go
  • Systems thinker who understands how PLCs, equipment, sensors, networks, data systems, and MES/ERP fit together, and who designs for the whole picture rather than one box at a time
  • Standards-setter — writes the conventions, templates, and documentation that make the next deployment faster and the next engineer’s job easier
  • Builder’s mindset: ships working systems, documents them well, and comes back to improve them rather than leaving them to drift
  • Comfortable in a Linux environment and on the command line — reads logs, writes scripts, and troubleshoots at the OS level
  • Clear communicator who can work across ME, Manufacturing Test, IT, production, and external integrators without losing the thread

MINIMUM REQUIREMENTS

  • 5+ years of controls or automation engineering experience in a manufacturing or production environment, with a track record of deploying, commissioning, and supporting automated equipment through its lifecycle
  • Demonstrated experience speccing and building controls systems in-house, including sensor and component selection, electrical design, panel build, and bring-up
  • Strong PLC programming experience, with Siemens preferred (TIA Portal / Step 7); comparable experience on other major platforms (Rockwell, Beckhoff, etc.) considered
  • Proficiency in Python and/or C++ for scripting, data acquisition, and system integration; other languages considered where the fundamentals are strong
  • Comfort working in Linux environments — command line, scripting, services, basic sysadmin
  • Working experience with industrial networking, including Ethernet/IP and EtherCAT; able to design, configure, and troubleshoot at the network level
  • Experience designing and deploying SCADA, historian, or factory data logging systems in a production environment
  • Experience defining or significantly contributing to controls standards (code structure, naming, network architecture, HMI patterns, documentation) across multiple pieces of equipment
  • Strong documentation habits across code, electrical schematics, network diagrams, and operator-facing HMIs
  • Clear written and verbal communication, and the ability to partner across ME, Manufacturing Test, IT, production, and external vendors

PREFERRED SKILLS

  • Experience integrating factory systems with MES and ERP platforms (Odoo or comparable)
  • Experience commissioning vendor-supplied automation and managing third-party integrators through deployment and handoff
  • Familiarity with safety-rated controls (safety PLCs, light curtains, interlocks) and relevant standards
  • Experience with containerization, version control (Git), and modern software practices applied to factory systems
  • Exposure to humanoid robotics, prosthetics, surgical robotics, or other high-mix precision manufacturing environments
  • Experience scaling controls and data systems across multiple production areas or shifts

WHAT DOES A SUCCESSFUL 1X TEAM MEMBER LOOK LIKE

Team members at 1X who thrive here are builders. They move fast, own their work completely, and treat time like it’s the one thing you can’t get back — because it is. They say what they mean, finish what they start, and hold themselves to a standard before anyone has to ask. We push each other to be better, and we do it with honesty and respect.

COMPENSATION RANGE

$140,000 – $220,000 + Equity

BENEFITS

  • Comprehensive medical, dental, and vision coverage
  • Generous paid time off, company holidays, and parental leave
  • 401(k) plan with company match (100% on the first 3% of contributions, 50% on the next 2%)
  • Flexible Spending Accounts (FSA) and Health Savings Accounts (HSA) options
  • Commuter benefits (transit and parking)
  • Short-term and long-term disability, and life insurance
  • Employee Assistance Program (EAP) for mental health, financial, and personal support
  • Onsite snacks and catered lunches

EQUAL OPPORTUNITY EMPLOYER

1X is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship, age, marital status, medical condition, genetic information, disability, military or veteran status, justice system impact, or any other characteristic protected under applicable federal, state, or local law.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Mechanical Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted yesterday

Optical Engineer

LLNL · Livermore, CA

$146k–$223k/yrFull-timeOn-site

StrongChecked open todayPosted yesterday

Mechanical Engineer

1X · San Carlos, CA

$150k–$176k/yrFull-timeOn-site

Looks goodChecked open todayPosted 3 days ago

See more like this