Assembler jobs

Manufacturing Sub Assembly Technician

ATOMSSan Francisco, CAOn-sitePosted 1 month ago

Pay not listed

Looks real. 1 thing to check before you apply.

On ATOMS’s own careers site (Greenhouse), checked open today.

  • To check: No pay range listed, though one is likely required in CAAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 90 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Assemble sensor pods and sub-assemblies from components using engineering drawings and work instructions.
  • Torque and verify fasteners, route and secure wiring, and check finished assemblies for fit, security, and connector quality.
  • Document builds and serial numbers, log issues, and flag missing parts, unclear instructions, and design problems.
  • Support rework when designs change, complete training across assembly stations, and maintain a clean, organized, safe work area.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Some hands-on mechanical or electro-mechanical assembly experience, including vocational training, school programs, or personal projects
  • Experience using torque wrenches/drivers or working to torque specs
  • Exposure to wiring, connectors, or low-voltage electrical systems, and basic multimeter use

Education

  • High school diploma or equivalent

Skills

  • Basic familiarity with hand tools and power tools, and willingness to learn proper torque tool use
  • Mechanical aptitude and ability to follow work instructions, diagrams, and assembly documentation
  • Basic command of the English language

On the job

  • Ability to lift and carry up to 50 pounds
  • Ability to work in, under, and around vehicles, including kneeling, crouching, reaching into confined spaces, and roof-level work
  • Ability to stand and perform repetitive tasks for extended periods

Other requirements

  • Work onsite five days a week at the San Francisco office

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance with multiple plan options, including HSA options, Health Savings Account (HSA), Flexible Spending Accounts for healthcare, dependent care, and commuter expenses
Dental & vision
Dental and vision insurance
Retirement plan
401(k)
Paid time off
Paid vacation time accrued at 1 hour for every 26 hours worked, 8 paid holidays per year, Paid sick time, Paid bereavement leave
Parental leave
Paid parental leave
Life & disability insurance
Company-paid short- and long-term life and disability insurance, Voluntary accident, critical illness, and hospital indemnity insurance, Optional supplemental life insurance for employees, spouses, and children
Other
Pet insurance discount through Fetch

Full job description

From ATOMS’s careers site

Who we are

Atoms is building the machines that power the next era of progress.

Over the last decade, software has transformed the digital world. But the physical world, where food is made, minerals are mined, goods are moved, and industries are run, remains far less intelligent, far less efficient, and far more constrained. We’re changing that.

Atoms builds Physical AI— real-world robots for the industries that move civilization forward, starting with food, mining, and transport. Our systems are designed to understand, predict, and control the real world with precision, turning complex physical operations into something more reliable, more scalable, and more productive.

Show full descriptionShow less

This work requires more than robotics. It requires deep integration across hardware, software, AI, operations, manufacturing, and real estate. We don’t just build machines in a lab. We deploy them into real environments, operate them, learn from them, and improve them until they work at scale.

We are roboticists, engineers, operators, and builders. We believe the next great technology companies will not only transform information, but the physical systems that shape everyday life.

If you want to work on hard problems with real-world impact, join us.

About the Role

As a Manufacturing/Sub Assembly Technician, you will build the sensor pods and sub-assemblies that go onto our autonomous vehicles. Working from engineering drawings and work instructions, you'll assemble brackets, sensors, and harnessing into finished sensor pods, and make sure every fastener is torqued to spec, and every pod is solid before it moves to vehicle installation. This is an entry-level role: senior technicians and leads will train you on our build process, tools, and quality standards. You'll work in a fast-moving production environment where processes and designs are actively evolving, so precision matters and so does speaking up when something doesn't look right.

What you’ll do

  • Assemble sensor pods from components, including mounting and aligning sensors, brackets, and enclosures per engineering drawings and work instructions
  • Build and stage sub-assemblies (brackets, mounts, harness segments, and hardware kits) ahead of final pod and vehicle install
  • Torque all fasteners to spec using calibrated torque tools, and mark/verify torque (e.g., torque striping) so every pod is secure and vibration-ready
  • Route and secure pod wiring with proper connector seating, strain relief, and cable management
  • Perform quality checks on finished pods and sub-assemblies (fit, fastener security, connector checks) before handoff to installation
  • Follow standard operating procedures and flag gaps, unclear steps, missing or wrong parts, and design issues to leads and engineering
  • Log build issues in the issue tracker so engineering can close the loop on part and design problems
  • Accurately document completed builds, serial numbers, and checks as required
  • Support rework when design updates roll out to existing pods
  • Complete on-the-job training and build proficiency across assembly stations
  • Maintain a clean, organized, and safe work area, including tool and part organization

What we’re looking for

  • High school diploma or equivalent
  • Basic familiarity with hand tools and power tools, and willingness to learn proper torque tool use
  • Mechanical aptitude and ability to follow work instructions, diagrams, and assembly documentation
  • Some hands-on mechanical or electro-mechanical assembly experience (including vocational training, school programs, or personal projects)
  • Experience using torque wrenches/drivers or working to torque specs
  • Exposure to wiring, connectors, or low-voltage electrical systems, basic multimeter use
  • Strong teamwork skills, communication, and attention to detail–especially on repetitive, precision assembly work
  • Eagerness to learn and take feedback in a fast-changing production environment where processes evolve week to week
  • Basic command of the English language

Physical Requirements

  • Ability to lift and carry up to 50 pounds
  • Ability to work in, under, and around vehicles, including kneeling, crouching, reaching into confined spaces, and roof-level work
  • Ability to stand and perform repetitive tasks for extended periods

Why join us

At Atoms, you’ll work on one of the defining challenges of our time—bringing automation into the physical world to drive real, lasting impact. We exist to uncover valuable unknown truths and turn them into progress, which means constantly pushing beyond what’s known and building what doesn’t yet exist. The work is ambitious and often challenging, but it’s grounded in a shared sense of purpose and a team committed to seeing it through together. Our work only matters if it serves others, and we know that meaningful progress depends on the trust of the people we serve and the strength of our team—so we invest in both, creating an environment where you can do your best work and grow.

What else you need to know

This role is based in our San Francisco office. Atoms is a company driven by invention and continuous change - we are constantly reimagining our industries, building new products, and refining how we operate. We do our best work together. That’s why all of our office-based teams work onsite, five days a week.

The base starting rate for this role is $32,00 - $42,00 per hour.

Actual compensation will be determined on an individual basis and may vary depending on experience, skills, and qualifications.

Benefits Summary:

  • Medical, dental, and vision insurance (multiple plans, incl. HSA options)
  • Company-paid life and disability insurance (short- and long-term)
  • Voluntary insurance: accident, critical illness, hospital indemnity
  • Optional supplemental life insurance for self, spouse, and children
  • Pet insurance discount (Fetch)
  • 401(k)
  • Health Savings Account (HSA)
  • Flexible Spending Accounts (Healthcare, Dependent Care, Commuter)
  • Time Off policies
  • Paid Vacation Time (1h for every 26h worked)
  • 8 paid holidays per year
  • Paid sick time
  • Paid Bereavement leave
  • Paid Parental Leave.

Benefits are subject to change at the company's discretion. Atoms accepts applications on an ongoing basis.

Ready to join us as we serve those who serve others?

#LI-Onsite

Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Manufacturing Technician

Skild AI · San Mateo, CA

$70k–$150k/yr · see postingOn-site

Wide pay rangeChecked open todayPosted 18 days ago

Assembly Technician

Continuum Resource Network · San Francisco, CA

Pay not listedOn-site

Looks good2 to checkLast seen open yesterdayPosted 2 months ago

Assembly Technician

Pantograph · San Francisco, CA

Pay not listedPart-timeOn-site

Looks good2 to checkChecked open todayPosted 4 months ago

Manufacturing Technician

Specter · San Francisco, CA

Pay not listedFull-timeOn-site

Looks good2 to checkChecked open todayPosted 8 months ago

See more like this