Electrical Engineer jobs

Senior Hardware Reliability Test Engineer – Electrical Systems & Power Electronics

Cerebras SystemsSunnyvale, CAFull-timeOn-sitePosted 10 days ago

$190k–$230k/yr listed by the employer

Above the typical $181k a year for senior Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 512 senior Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
5+ years
Degree
Bachelor's degree

Looks real and checked open today.

On Cerebras Systems’ own careers site (Ashby).

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Design, build, and troubleshoot electrical test fixtures and automated setups for power electronics and system reliability testing.
  • Create test plans and execute accelerated life, burn-in, temperature, power/load cycling, and humidity testing.
  • Measure electrical performance before, during, and after stress, and analyze degradation using reliability methods.
  • Investigate electrical failures, reproduce system anomalies, and correlate test results with physical failure-analysis findings.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of experience in electrical testing, hardware validation, reliability engineering, or electrical failure analysis
  • Practical experience with oscilloscopes, differential and current probes, programmable power supplies, electronic loads, multimeters, power analyzers, source measurement units, and data acquisition (D
  • Experience integrating electrical test fixtures with environmental chambers and automated monitoring systems (preferred)
  • Hands-on work with high-current power modules, converters, and power delivery assemblies (preferred)
  • Experience with board bring-up, system integration, embedded firmware, Linux-based test environments, and hardware communication interfaces (preferred)

Education

  • BS in Electrical Engineering, Computer Engineering, or a related technical discipline
  • Master’s degree or PhD in Electrical Engineering, Computer Science, or a related field (preferred)

Skills

  • Ability to turn electrical test requirements into working laboratory setups, including custom fixtures, interface circuitry, wiring, and instrumentation
  • Strong knowledge of PCBAs, power conversion, voltage regulation, power distribution, and electronic circuit behavior
  • Proficiency in Python, LabVIEW, or equivalent tools for test automation and data analysis
  • Strong circuit-debugging skills and ability to interpret schematics, PCB layouts, and component specifications
  • Familiarity with relevant JEDEC and IPC test methods and qualification practices
  • Ability to interpret microscopy, thermal imaging, X-ray, and cross-sectional findings in the context of electrical failures (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Compensation may include equity.
Bonus
Compensation may include a bonus.

Full job description

From Cerebras Systems’ careers site

Cerebras Systems builds the world's largest AI chip, 56 times larger than GPUs. This architecture allows Cerebras to deliver industry-leading training and inference speeds; over 10 times faster than GPU-based hyperscale cloud inference services.

This order of magnitude increase in speed is transforming the user experience of AI applications, unlocking real-time iteration and increasing intelligence via additional agentic computation.

Show full descriptionShow less

Cerebras works with the leading model labs, global enterprises, and cutting-edge AI-native startups. OpenAI recently announced a multi-year partnership https://openai.com/index/cerebras-partnership/ with Cerebras, to deploy 750 megawatts of scale, transforming key workloads with ultra high-speed inference.

Role Summary

This position develops the test capabilities and experimental evidence needed to assess the reliability of electrical hardware. You will evaluate PCB assemblies, power supplies, AC/DC and DC/DC converters, voltage regulators, and power distribution assemblies through controlled electrical and environmental testing.

A central part of the role is creating practical test solutions: designing and building custom jigs and fixtures, integrating instruments and electronic loads, writing automation, and tracking performance throughout accelerated stress testing. You will work directly with the Systems team to establish realistic operating conditions and evaluate how components, boards, and power modules behave within the complete system.

Electrical failure analysis is also part of the work. You will investigate abnormal behavior, reproduce failures, isolate suspect components or circuits, and collaborate with the Failure Analysis and Design teams to connect test results with failure mechanisms and verify corrective actions.

Key Responsibilities

  • Design, assemble, and troubleshoot custom electrical test jigs, fixtures, interface boards, load circuits, and wiring harnesses for power electronics and system reliability testing.
  • Work directly with the Systems team to establish representative workloads, power sequencing, electrical interfaces, operating limits, and monitoring requirements.
  • Translate product requirements and reliability risks into test plans with defined stress conditions, sample sizes, durations, measurements, and acceptance criteria.
  • Build automated test setups integrating programmable power supplies, electronic loads, switching hardware, sensors, and data acquisition equipment.
  • Develop Python or equivalent software for instrument control, test sequencing, continuous monitoring, fault capture, and analysis.
  • Execute accelerated life testing, burn-in, powered temperature cycling, power/load cycling, and biased temperature/humidity testing based on the hardware and failure mechanisms being evaluated.
  • Establish electrical baselines and monitor changes before, during, and after stress. Measurements may include efficiency, regulation, ripple and noise, transient response, startup/shutdown behavior, protection functions, and thermal derating.
  • Investigate electrical failures using schematics, PCB layouts, component datasheets, and bench measurements to isolate shorts, opens, leakage, intermittent behavior, and performance degradation.
  • Reproduce system-level anomalies in controlled experiments with the Systems team and correlate electrical results with physical failure-analysis findings.
  • Use DOE, statistical reliability analysis, and physics-of-failure methods to assess degradation, compare design alternatives, and evaluate component or process changes.
  • Partner with Design, Failure Analysis, Mechanical/Thermal Engineering, Quality, Manufacturing, and suppliers to validate corrective actions and communicate reliability risks.
  • Maintain calibrated, repeatable test setups with appropriate electrical protection and interlocks.
  • Document fixture designs, test procedures, results, and investigation findings so that methods can be reproduced and conclusions can guide engineering decisions.

Skills and Qualifications

  • 5+ years of experience in electrical testing, hardware validation, reliability engineering, or electrical failure analysis.
  • Demonstrated ability to turn electrical test requirements into working laboratory setups, including custom fixtures, interface circuitry, wiring, and instrumentation.
  • Strong knowledge of PCBAs, power conversion, voltage regulation, power distribution, and electronic circuit behavior.
  • Practical experience with oscilloscopes, differential and current probes, programmable power supplies, electronic loads, multimeters, power analyzers, source measurement units, and data acquisition systems.
  • Proficiency in Python, LabVIEW, or equivalent tools for test automation and data analysis.
  • Strong circuit-debugging skills and the ability to interpret schematics, PCB layouts, and component specifications.
  • Understanding of accelerated testing, electronics failure mechanisms, reliability statistics, and measurement uncertainty.
  • Familiarity with relevant JEDEC and IPC test methods and qualification practices.
  • Ability to collaborate directly with Systems engineers, communicate technical findings clearly, and manage multiple laboratory investigations.
  • BS in Electrical Engineering, Computer Engineering, or a related technical discipline.

Desired Skills and Qualifications

  • Master’s degree or PhD in Electrical Engineering, Computer Science, or a related field.
  • Experience integrating electrical test fixtures with environmental chambers and automated monitoring systems.
  • Hands-on work with high-current power modules, converters, and power delivery assemblies.
  • Experience with board bring-up, system integration, embedded firmware, Linux-based test environments, and hardware communication interfaces.
  • Knowledge of reliability concerns associated with power semiconductors, capacitors, magnetic components, connectors, and solder joints.
  • Ability to interpret microscopy, thermal imaging, X-ray, and cross-sectional findings in the context of electrical failures.

Location: Sunnyvale, CA

The base salary range for this position is $190,000 to $230,000 annually. Actual compensation may include bonus and equity, and will be determined based on factors such as experience, skills, and qualifications.

Why Join Cerebras

People who are serious about software make their own hardware. At Cerebras, we have built a breakthrough architecture that is unlocking new opportunities for the AI industry. With dozens of model releases and rapid growth, we’ve reached an inflection point in our business. Members of our team tell us there are five main reasons they joined Cerebras:

1. Build a breakthrough AI platform beyond the constraints of the GPU.

2. Publish and open source their cutting-edge AI research.

3. Work on one of the fastest AI supercomputers in the world.

4. Enjoy job stability with startup vitality.

5. Our simple, non-corporate work culture that respects individual beliefs.

Find out more about what it's like to work at Cerebras here https://www.cerebras.ai/join-us!

Apply today and become part of the forefront of groundbreaking advancements in AI!

This website or its third-party tools process personal data. For more details, click here https://www.cerebras.net/privacy/ to review our CCPA disclosure notice.

Cerebras Systems is committed to creating an equal and diverse environment and is proud to be an equal opportunity employer. We celebrate different backgrounds, perspectives, and skills. We believe inclusive teams build better products and companies. We try every day to build a work environment that empowers people to do their best work through continuous learning, growth and support of those around them.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior RF Test Engineer

Tarana Wireless, Inc. · Milpitas, CA

$120k–$155k/yrFull-time

StrongChecked open todayPosted 16 days ago

See more like this