Maintenance, Repair & Facilities jobs

SMT Engineer Supervisor (NVD)

Foxconn Industrial Internet - FIIHouston, TXFull-timeOn-siteFirst seen yesterday

$100k/yr listed by the employer

Key facts

Experience
3+ years
Degree
Bachelor's degree

Looks real and checked open today.

On Foxconn Industrial Internet - FII’s own careers site (JazzHR).

Trust score ready Nov 28

  • Checked: On the company's own careers siteJazzHR board
  • Checked: Checked open todayLive check
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 28
See all 4 checksShow fewer
How we check

What you’ll do

  • Lead preventive maintenance, equipment checks, troubleshooting, and repairs across SMT and supporting production lines.
  • Investigate recurring equipment faults, defects, and line stoppages with Quality and Process Engineering; use maintenance data to improve reliability.
  • Manage spare parts, vendors, equipment servicing, upgrades, installations, and qualifications.
  • Oversee equipment readiness, changeovers, setups, cycle times, throughput, and yield in production areas.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Experience using CMMS software, spare parts inventory systems, and project planning tools
  • Minimum 3 years of supervisory or lead experience in SMT or electronics manufacturing equipment maintenance (preferred)
  • Practical experience maintaining and troubleshooting major SMT, printing, reflow, and inspection platforms (preferred)
  • Experience with ASM, Siemens, Fuji, Panasonic, DEK, Heller, or Koh Young equipment (preferred)
  • Ability to drive downtime reduction, enforce PMI discipline, and lead structured root-cause problem solving (preferred)

Education

  • Bachelor’s degree in Engineering, Electronics, Mechanical/Industrial Technology, or a related technical field

Skills

  • Ability to read and interpret electrical, pneumatic, and mechanical schematics, including high-voltage systems up to 480V
  • Familiarity with Lean Manufacturing, TPM (Total Productive Maintenance), and high-mix NVD line qualifications
  • Deep, hands-on knowledge of SMT process flow, failure modes, and equipment maintenance best practices (preferred)

Other requirements

  • Must be authorized to work in the U.S. (preferred)
  • Based in or willing to relocate to the Houston, TX area (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Foxconn Industrial Internet - FII’s careers site

SMT Engineer Supervisor (NVD)

Locations: Houston Business Units: CESBG Job Classification: Exempt

Summary Foxconn Industrial Internet (Fii) is a global leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools, and industrial robots. Our goal is to provide customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform.

Show full descriptionShow less

We are seeking a hands-on, reliability-driven SMT Engineering Supervisor to join our Houston team. In our dynamic, high-mix New Product Development (NVD) electronics manufacturing environment, this role is directly responsible for maximizing SMT line uptime, equipment health, and maintenance execution while leading floor technicians and supporting seamless production operations.

Key Responsibilities

  • SMT Equipment Upkeeping & Preventive Maintenance (Core Focus)
  • Preventive & Predictive Maintenance: Lead daily equipment checks and execute scheduled Preventive Maintenance Inspections (PMIs) across SMT and supporting production lines, ensuring high PMI compliance and verifying that all repairs meet OEM and internal quality standards.
  • Rapid Troubleshooting & Downtime Reduction: Drive fast fault isolation and recovery on the production floor to minimize Mean Time to Repair (MTTR) and maximize equipment availability.
  • Root Cause & Chronic Issue Elimination: Partner with Quality Engineering (QE) and Process Engineering (PE) to conduct structured root cause analysis (RCA / 8D) on recurring equipment faults, placement/printing/reflow defects, and line stoppages.
  • Spare Parts & Critical Inventory Management: Maintain accurate critical and wear spare parts inventory to prevent line-down stockouts while controlling spare parts spend and replenishment lead times.
  • CMMS & Maintenance Data Discipline: Utilize Computerized Maintenance Management System (CMMS) tools to track work orders, log failure codes, audit maintenance history, and drive data-backed reliability improvements.
  • Vendor Coordination, Installs & Upgrades: Manage OEM and third-party vendor servicing, calibration, machine upgrades, and new equipment planning, installation, and qualification for NVD ramp-ups.
  • Production Line Support & Operations
  • Oversee equipment readiness across SMT, reflow, wave soldering, manual insertion, dispensing, and rework areas.
  • Manage line changeovers, machine setups, and workstation readiness in a fast-paced, high-mix NVD environment.
  • Monitor line cycle times, throughput, and yield to ensure equipment performance supports production schedules and efficiency targets.
  • Team Leadership & Development
  • Supervise, coach, and schedule maintenance technicians, engineers, and floor support staff across shifts.
  • Recruit, onboard, and cross-train team members on SMT platform diagnostics, PM standards, and hands-on repair procedures.
  • Conduct regular performance reviews, establish clear shift handoff protocols, and build a proactive, accountable maintenance culture.
  • Cost, Safety & EHS Compliance
  • Manage the departmental maintenance budget and drive continuous waste and scrap reduction.
  • Strictly enforce workplace safety, Lockout/Tagout (LOTO), and Environmental, Health & Safety (EHS) procedures, including high-voltage equipment safety.

Preferred Qualifications

  • Minimum 3 years of supervisory or lead experience in SMT or electronics manufacturing equipment maintenance.
  • Deep, hands-on knowledge of SMT process flow, failure modes, and equipment maintenance best practices.
  • Practical experience maintaining and troubleshooting major SMT, printing, reflow, and inspection platforms (e.g., ASM, Siemens, Fuji, Panasonic, DEK, Heller, Koh Young).
  • Proven ability to drive downtime reduction, enforce PMI discipline, and lead structured root-cause problem solving on the production floor.
  • Strong leadership, communication, and cross-functional coordination skills with PE, QE, Production, and OEM vendors.
  • Must be authorized to work in the U.S., based in (or willing to relocate to) the Houston, TX area, and willing to work flexible shifts and weekends as needed.

Education and Experience

  • Bachelor’s degree in Engineering, Electronics, Mechanical/Industrial Technology, or a related technical field.
  • Experience using CMMS software, spare parts inventory systems, and project planning tools.
  • Ability to read and interpret electrical, pneumatic, and mechanical schematics, including high-voltage systems (up to 480V).
  • Familiarity with Lean Manufacturing, TPM (Total Productive Maintenance), and high-mix NVD line qualifications.

Salary Range: $100,000/annum - $120,000 per year

Foxconn Assembly is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws.

Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S.

Something wrong with this job? Report it

Similar jobs

See more like this