Mechanical Engineer jobs

Senior Thermal Modeling & Analysis Engineer

Radiant IndustriesEl Segundo, CAFull-timeOn-site

$140k–$225k/yr listed by the employer

Above the typical $165k a year for senior Mechanical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 308 senior Mechanical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
5+ years
Degree
Bachelor's degree

This job is closed.

The employer took it down 16 days ago, after 5 days open. Here are similar open jobs.

  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

Similar open jobs

Senior Mechanical Engineer

CHAOS Industries · El Segundo, CA +1 place

$140k–$176k/yrFull-timeOn-site

StrongChecked open todayPosted 8 days ago

See more like this

What you’ll do

  • Develop, run, validate, and document thermal and CFD analyses for the Kaleidos microreactor.
  • Model heat transfer, gas flow, and coupled thermal-fluid behavior across reactor systems under steady-state, transient, and off-normal conditions.
  • Assess hotspots, thermal gradients, heat loads, flow distribution, pressure losses, and system margins.
  • Correlate models with test data, improve simulation workflows, and develop reduced-order models.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of relevant thermal, CFD, or thermal-fluid analysis experience
  • Experience performing steady-state and transient thermal-fluid analyses
  • Experience with model verification, sensitivity studies, and validation or test correlation
  • Experience modeling high-temperature gas systems, nuclear reactors, propulsion systems, turbomachinery, or other complex energy systems (preferred)
  • Experience with thermal FEA and coupled fluid-thermal-structural analysis (preferred)
  • Experience modeling radiative heat transfer, including surface-to-surface or participating-media radiation (preferred)
  • Experience developing reduced-order or system-level thermal-fluid models (preferred)
  • Experience with high-performance computing, optimization, or large parametric simulation campaigns (preferred)

Education

  • Bachelor’s degree in mechanical, aerospace, nuclear engineering, physics, or a related field

Skills

  • Extensive experience with STAR-CCM+, Ansys Fluent, or comparable CFD software
  • Strong foundation in heat transfer, fluid mechanics, turbulence modeling, and numerical methods
  • Ability to prepare and simplify CAD geometry for analysis using Siemens NX or comparable software
  • Experience using Python or another scripting language to automate simulation and post-processing workflows
  • Familiarity with nuclear heat generation, decay heat, neutronics coupling, or radiation transport (preferred)

Other requirements

  • Willing to support extended hours when needed to meet critical program milestones
  • Must work 100% onsite at El Segundo HQ
  • Capacity to serve in compliance with U.S. export controls

Benefits

Health insurance
Medical coverage at 100% up to the base silver level plan for employees and 50% for dependents; plans up to Platinum are offered., Sponsored One Medical memberships for employees and their dependents., Voluntary life, accident, hospital, and critical illness coverage, plus commuter and FSA/HSA benefits, are offered as employee-contributed benefits.
Dental & vision
Vision: 100% coverage for the top-tier plan and 50% for dependents., Dental: 100% coverage for the top-tier plan, with orthodontia extra; 50% coverage for dependents.
Paid time off
Flexible PTO policy.
Parental leave
Eight weeks of paid parental leave for all parents; additional paid pregnancy leave for California employees.
Equity
Substantial incentive stock plan for all full-time employees.
Learning & tuition
Nuclear Engineering Certificate Program with Penn State University, fully covered for eligible employees.
Flexible schedule
Remote workday allocation.
Meals
Daily catered lunch, free snacks, and drinks.
Other
Company and team-bonding events and happy hours.

Full job description

From Radiant Industries’ careers site

ABOUT RADIANT

Show full descriptionShow less

Radiant is an El Segundo, CA-based company building the world's only mass-produced, transportable nuclear microreactors. The U.S. grid is under growing strain, with power demand accelerating, driving higher utility costs, rising carbon emissions, and interconnection backlogs. Radiant has a solution, transportable, on-site power. Our first reactor, Kaleidos, is 1 megawatt: small enough to be factory-built, transported by land, sea, or air, and deployed wherever power is needed. 1 MW can power 1000 homes for five years. Ship it back and we refuel for a 20 year operating life. We made energy a product that can be used for critical infrastructure like military bases, data centers, hospitals, and remote sites, as well as the commercial main street businesses that keep America running. Founded in 2020, Radiant is under contract to deliver power to the U.S. Army, Navy and Air Force and has signed pre-order agreements with Equinix, with deployments beginning in 2028.

ABOUT THE ROLE

Radiant is seeking a driven Senior Thermal Modeling & Analysis Engineer to own high-fidelity CFD and thermal modeling for the Kaleidos microreactor. You will analyze heat generation and transport, high-temperature gas flow, and thermal interactions across reactor systems, cooling systems, shielding, and surrounding hardware under steady-state, transient, and off-normal conditions.

Your work will directly influence system architecture, component design, material selection, operating limits, test planning, and safety margins. You will work across mechanical, fluid systems, nuclear, structures, controls, and test engineering to develop validated analytical tools that support the commercialization of the first mass-produced nuclear reactor.

Responsibilities & Duties:

  • Own thermal and CFD analyses from problem definition through model development, execution, validation, documentation, and design recommendation.
  • Model turbulent gas flow, conduction, convection, radiation, conjugate heat transfer, and coupled multiphysics behavior across Kaleidos systems.
  • Evaluate steady-state, transient, and off-normal operating conditions to identify hotspots, thermal gradients, heat loads, flow distribution, pressure losses, and system margins.
  • Define modeling assumptions, boundary conditions, material properties, and appropriate fidelity based on the engineering decision being supported.
  • Translate analytical results into actionable design recommendations and collaborate with engineering teams through design iteration.
  • Establish and implement simulation best practices, including convergence assessment, mesh and time-step independence, sensitivity studies, uncertainty evaluation, and model verification.
  • Correlate analytical models with test data and update modeling assumptions based on measured system behavior.
  • Build automated, reproducible workflows for parametric studies, design exploration, post-processing, and simulation efficiency.
  • Develop and validate reduced-order models that support system-level analysis and rapid design iteration.
  • Clearly communicate assumptions, limitations, risks, margins, and recommendations to cross-functional teams.

Required Qualifications & Skills:

  • Bachelor’s degree in mechanical, aerospace, nuclear engineering, physics, or a related field.
  • 5+ years of relevant thermal, CFD, or thermal-fluid analysis experience.
  • Extensive experience with STAR-CCM+, Ansys Fluent, or comparable CFD software.
  • Strong foundation in heat transfer, fluid mechanics, turbulence modeling, and numerical methods.
  • Experience performing steady-state and transient thermal-fluid analyses.
  • Experience with model verification, sensitivity studies, and validation or test correlation.
  • Ability to prepare and simplify CAD geometry for analysis using Siemens NX or comparable software.
  • Experience using Python or another scripting language to automate simulation and post-processing workflows.
  • Demonstrated ability to translate analytical results into engineering decisions and communicate effectively across disciplines.

Desired Qualifications & Skills:

  • Experience modeling high-temperature gas systems, nuclear reactors, propulsion systems, turbomachinery, or other complex energy systems.
  • Experience with thermal FEA and coupled fluid-thermal-structural analysis.
  • Experience modeling radiative heat transfer, including surface-to-surface or participating-media radiation.
  • Familiarity with nuclear heat generation, decay heat, neutronics coupling, or radiation transport.
  • Experience developing reduced-order or system-level thermal-fluid models.
  • Experience with high-performance computing, optimization, or large parametric simulation campaigns.
  • Driven, self-motivated, and capable of owning technically ambiguous problems end to end.

Additional Requirements

  • Willing to support extended hours when needed to meet critical program milestones.
  • Must work 100% onsite at El Segundo HQ.

BENEFITS AND PERKS

  • Stock: Substantial incentive stock plan for all full-time employees.
  • Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans.
  • One Medical: Sponsored memberships for employees and their dependents.
  • Vision: 100% top tier plan coverage + 50% for dependents.
  • Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents.
  • Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits.
  • 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees.
  • Nuclear Engineering Certificate Program: 100% covered educational program with Penn State University, for eligible employees, to rapidly upscale into nuclear.
  • Daily catered lunch. Free snacks and drinks.
  • Flexible PTO policy. Remote workday allocation.
  • Company and team-bonding events, happy hours and in-person camaraderie.
  • Beautiful El Segundo headquarters close to the Pacific Ocean.

Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant.

The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: recruiting@radiantnuclear.com.

This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Something wrong with this job? Report it · This flag looks wrong