Mechanical Engineer jobs

Thermal Design Engineer

Mind RoboticsPalo Alto, CAFull-timeOn-site

Pay not listed

Key facts

Experience
5+ years
Degree
PhD

Looks real. 2 things to check before you apply.

On Mind Robotics’ own careers site (Ashby), checked open today.

  • To check: Posted by the employer 6 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • To check: No pay range listed, though one is likely required in CAAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: No reposts foundAshby board
  • Trust score 70 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Own thermal design and analysis for robot arms, end effectors, actuators, and on-board compute from concept through volume production.
  • Develop thermal architectures and cooling solutions for motors, gearboxes, drives, end effectors, CPUs, GPUs, accelerators, and power electronics.
  • Build analytical, CFD, and FEA thermal models, then validate performance through hardware instrumentation, testing, and stress tests.
  • Select thermal components, work with suppliers and manufacturers, and define thermal limits, derating curves, and protection logic with partner teams.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of experience (or equivalent hard-tech projects) designing and validating thermal solutions for complex electromechanical systems
  • Hands-on experience with CFD tools and thermal FEA
  • Track record solving thermal problems in at least one of high-torque-density motors/actuators, dense power electronics, or compute (CPU/GPU/custom accelerator)
  • Comfortable instrumenting, testing, and debugging thermal performance on real hardware
  • Experience designing for volume processes such as extrusion, die casting, brazing, or stamping, and working with thermal component suppliers and contract manufacturers
  • Experience in robotics, prosthetics, EV powertrains, drones, or other dense electromechanical systems (preferred)
  • Experience with liquid cooling or hybrid air/liquid systems (preferred)

Education

  • PhD or research experience in thermal sciences (preferred)

Skills

  • Strong fundamentals in conduction, convection, and radiation, plus working knowledge of two-phase cooling and heat-pipe/vapor-chamber design
  • High proficiency in SolidWorks, Catia, or similar CAD tools
  • Familiarity with motor/actuator thermal modeling, including winding hot-spot estimation and lumped-parameter networks (preferred)

Other requirements

  • Comfortable with ambiguity and moving fast, with curiosity about how the entire system works

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Mind Robotics’ careers site

ABOUT MIND

Mind Robotics is building Physical AI for real-world industrial deployment, starting with the factory floor. We believe the hardest problems in AI are solved when researchers and engineers are hands-on with the physical world every day - and we're looking for people who are passionate about robotics, value ownership, and are excited to tackle difficult problems. Join us if you want to move beyond digital intelligence and put intelligence into motion.

ABOUT THE ROLE

Show full descriptionShow less

As a Thermal Design Engineer at Mind Robotics, you will own the thermal architecture and analysis for our industrial robots, from high-torque actuators and constrained end effectors to dense on-board compute. You will build high-fidelity CFD/FEA models and validate them through hands-on testing, environmental stress, and hardware instrumentation. Working from concept through volume production, you will design scalable cooling solutions like heat sinks, vapor chambers, and TIMs using manufacturing processes like die casting and extrusion. Collaborating closely with electrical, firmware, and controls teams, you will turn complex thermal challenges into high-performance, real-world Physical AI systems.

RESPONSIBILITIES

  • Own thermal design and analysis across the robot including arms, end effectors, and on-board compute from concept through volume production.
  • Develop thermal architectures for high-torque-density actuators (motors, gearboxes, drives) in joints, where heat dissipation is the limiting factor on continuous performance.
  • Design cooling solutions for end effectors within tight volume, mass, and cable-routing constraints.
  • Develop thermal management for on-board compute (CPUs, GPUs, custom accelerators, power electronics), including airflow, heat sinks, heat pipes, vapor chambers, TIMs, and active cooling where needed.
  • Build thermal models (analytical, CFD, FEA) and validate them with hands-on testing (thermocouple instrumentation, IR imaging, calorimetry, and accelerated stress tests)
  • Specify and select thermal components (TIMs, fans, heat pipes, heat sinks, blowers, phase-change materials) and own supplier relationships.
  • Define thermal limits, derating curves, and protection logic in collaboration with electrical, firmware, and controls teams.
  • Contribute to DFM/DFA so thermal solutions scale from low-volume prototypes to high-volume production.
  • Develop accelerated test plans to validate thermal performance over the product's lifetime, including environmental and duty-cycle stress.

QUALIFICATIONS

  • 5+ years of experience (or equivalent "hard tech" projects) designing and validating thermal solutions for complex electromechanical systems.
  • Strong fundamentals in conduction, convection, and radiation, plus working knowledge of two-phase cooling and heat-pipe / vapor-chamber design.
  • Hands-on experience with CFD tools (Ansys Icepak, Flotherm, SolidWorks Flow Simulation, or similar) and thermal FEA.
  • Track record solving thermal problems in at least one of: high-torque-density motors / actuators, dense power electronics, or compute (CPU / GPU / custom accelerator).
  • Comfortable instrumenting, testing, and debugging thermal performance on real hardware.
  • Experience designing for volume processes (extrusion, die casting, brazing, stamping) and working with thermal component suppliers and contract manufacturers.
  • High proficiency in SolidWorks, Catia, or similar CAD tools.
  • Hands-on problem-solving approach with the ability to iterate quickly.
  • You are comfortable with ambiguity, move fast, and have an "engineering curiosity" that drives you to understand how the entire system works, not just your part.

BONUS

  • Experience in robotics, prosthetics, EV powertrains, drones, or other dense electromechanical systems.
  • Familiarity with motor / actuator thermal modeling (winding hot-spot estimation, lumped-parameter networks).
  • Experience with liquid cooling or hybrid air / liquid systems.
  • PhD or research experience in thermal sciences.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Mechanical Engineer

ALTEN Technology USA · Palo Alto, CA +1 place

$115k–$125k/yrOn-site

StrongChecked open todayPosted 9 days ago

Mechanical Engineer

Arista Networks · Santa Clara, CA

$220k–$400k/yrFull-time

StrongChecked open todayPosted 29 days ago

See more like this