Electrical Engineer jobs

Lead RF Test & Integration Engineer

Neros TechnologiesTorrance, CA

$187k–$262k/yr listed by the employer

Above the typical $214k a year for manager-level Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 92 manager-level Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
7+ years
Degree
Bachelor's degree

Looks real. 1 thing to check before you apply.

On Neros Technologies’ own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 89 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Own RF qualification testing for drone video links, command-and-control links, antennas, RF front ends, and integrated systems.
  • Define validation plans, pass/fail criteria, test procedures, data review methods, and release gates; lead NPI test readiness and factory handoff.
  • Oversee manufacturing acceptance testing and develop and scale RF test infrastructure and automated production testing.
  • Investigate RF failures and drive root-cause analysis, corrective actions, and production readiness.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 7+ years of hands-on RF test, RF validation, RF systems, wireless hardware, or production test experience
  • Experience qualifying wireless products or RF subsystems through engineering validation, design validation, production validation, or equivalent release processes
  • Experience building or maintaining automated test systems, ideally using Python or similar scripting tools
  • Demonstrated ability to lead engineers and technicians, run test campaigns, prioritize work, review data, and communicate release risk to engineering and manufacturing leaders
  • Experience testing wireless links on UAVs, FPV drones, and telemetry systems (preferred)
  • Experience validating digital video links, analog video links, LoRa command-and-control links, telemetry links, or mesh/point-to-point radio systems (preferred)
  • Experience moving RF products from prototype into production, including factory test deployment, fixture design, operator instructions, yield analysis, and corrective action (preferred)
  • Experience with chamber testing, antenna pattern/radiated performance, conducted-to-radiated correlation, range tests, and real-world link margin validation (preferred)

Education

  • Bachelor of Science in Electrical Engineering, Electrical and Computer Engineering, RF/Microwave Engineering, or a related technical field

Skills

  • Strong fundamentals in RF measurements, including S-parameters, output power, EVM/BER/PER, sensitivity, noise figure, linearity, phase noise, spurious emissions, desense, coexistence, link budget, and
  • Hands-on experience with RF lab equipment such as spectrum analyzers, VNAs, signal generators, power meters, oscilloscopes, SDRs, chambers/OTA setups, and automated test stations
  • Strong understanding of DFT, production test limits, fixture validation, manufacturing yield, calibration, GR&R, and NPI handoff

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Highly competitive equity grants are considered part of the total compensation package.

Full job description

From Neros Technologies’ careers site

Who we are

Neros is a defense technology company rebuilding America’s drone industrial base. We design and manufacture high-performance unmanned systems that are tested in combat, iterated at startup speed, and built at massive scale. Our team culture is fast, hands-on, and obsessed with closing the gap between design and deployment.

As drones transform the character of warfare, Neros is delivering the systems the West needs to compete on the modern battlefield and deter the adversaries of democracy. We’re hiring engineers, operators, and builders who want to move fast, take on extreme ownership, and get capability into the hands of warfighters in months, not years.

What you will be doing

Show full descriptionShow less

As a Lead RF Test & Integration Engineer, you will own the qualification and production test strategy for the wireless systems that make Neros FPV drones work in the real world. You will lead RF validation for video and command-and-control links, build the test infrastructure that catches problems before they reach the field, and oversee NPI and manufacturing acceptance testing as products move from engineering prototypes into production. You will directly manage RF test engineers and technicians, set the technical bar for test execution, and partner with design engineering and manufacturing to close the loop between failures, root cause, corrective action, and production readiness.

Responsibilities

  • Own RF qualification testing for FPV drone video links, command-and-control links, antennas, RF front ends, and integrated aircraft/ground systems
  • Define validation plans, pass/fail criteria, test procedures, data review methods, and release gates for wireless subsystem qualification
  • Lead NPI test readiness for new RF products, including EVT/DVT/PVT planning, fixture readiness, station bring-up, GR&R, and factory handoff
  • Oversee manufacturing acceptance testing for RF assemblies and integrated products, including conducted RF tests, radiated tests, range/performance checks, and automated production test limits
  • Build, improve, and scale RF test infrastructure using VNAs, spectrum analyzers, signal generators, power meters, SDRs, chambers/OTA setups, Python automation, and production test software
  • Drive root-cause investigations for RF desense, interference, range degradation, yield loss, calibration drift, fixture issues, and field-return failures
  • Manage and mentor a team of RF test engineers and technicians; set priorities, review technical work, and make sure testing is fast, rigorous, and repeatable
  • Partner with RF design, electrical engineering, embedded software, manufacturing, supply chain, and quality to turn test results into design fixes and production controls

You should have the following

  • Bachelor of Science in Electrical Engineering, Electrical and Computer Engineering, RF/Microwave Engineering, or a related technical field
  • 7+ years of hands-on RF test, RF validation, RF systems, wireless hardware, or production test experience
  • Experience qualifying wireless products or RF subsystems through engineering validation, design validation, production validation, or equivalent release processes
  • Strong fundamentals in RF measurements: S-parameters, output power, EVM/BER/PER, sensitivity, noise figure, linearity, phase noise, spurious emissions, desense, coexistence, link budget, and antenna performance
  • Hands-on experience with RF lab equipment such as spectrum analyzers, VNAs, signal generators, power meters, oscilloscopes, SDRs, chambers/OTA setups, and automated test stations
  • Experience building or maintaining automated test systems, ideally using Python or similar scripting tools
  • Demonstrated ability to lead engineers and technicians, run test campaigns, prioritize work, review data, and communicate release risk to engineering and manufacturing leaders
  • Strong understanding of DFT, production test limits, fixture validation, manufacturing yield, calibration, GR&R, and NPI handoff

Nice to have

  • Drone RF systems: Experience testing wireless links on UAVs, FPV drones, and telemetry systems
  • Video and C2 links: Experience validating digital video links, analog video links, LoRa command-and-control links, telemetry links, or mesh/point-to-point radio systems
  • Manufacturing scale-up: Experience moving RF products from prototype into production, including factory test deployment, fixture design, operator instructions, yield analysis, and corrective action
  • OTA and range testing: Experience with chamber testing, antenna pattern/radiated performance, conducted-to-radiated correlation, range tests, and real-world link margin validation

US Salary Range

$187,000 – $261,500 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Neros' total compensation package.

We’re an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 7 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 9 days ago

Electrical Engineer IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$130k–$135k/yrFull-timeOn-site

StrongChecked open todayPosted 18 days ago

See more like this