Electrical Engineer jobs

Power Electronics Engineer (Prism)

Northwood SpaceTorrance, CAFull-timePosted 23 days ago

$104k–$153k/yr listed by the employer

Below the typical $138k a year for mid-level Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 170 mid-level Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
3+ years
Degree
Bachelor's degree
US visa
No US visa sponsorship

Looks real and checked open today.

On Northwood Space’s own careers site (Ashby).

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Design Prism's AC-DC and DC-DC conversion, power distribution, and supplies for high-power RF amplifiers.
  • Define the power architecture and evaluate tradeoffs in efficiency, thermal load, reliability, cost, and deployment speed.
  • Design switching, sequencing, protection, fault detection, and recovery schemes; define interfaces with RF, digital, and motion-control loads.
  • Model, build, bring up, characterize, and debug power hardware, and oversee schematic capture and PCB layout.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3-5+ years of power electronics hardware design experience
  • Hands-on experience designing switched-mode power converters (buck, boost, flyback, LLC, or similar) at hundreds of watts or more
  • Experience taking power hardware from schematic and layout through bring-up, characterization, and debug in the lab
  • Kilowatt-class AC-DC and isolated DC-DC converter design, including power factor correction, magnetics, and wide-bandgap (GaN, SiC) power stages (preferred)
  • Drain supply and bias design for GaN RF power amplifiers, including sequencing and low-ripple regulation (preferred)
  • Protection circuitry design, including hot-swap, inrush limiting, overcurrent, reverse-polarity, and surge, lightning, and transient protection for grid-connected outdoor equipment (preferred)
  • Converter stability, thermal design, and EMI/EMC mitigation for high-density power hardware, including input filter design and control loop compensation (preferred)
  • Motor drive power electronics for antenna positioners or motion control systems (preferred)
  • Design for manufacturing, production test development, and reliability qualification (preferred)

Education

  • Bachelor's degree in electrical engineering or a related engineering discipline
  • Master’s degree or PhD in electrical engineering with a focus on power electronics (preferred)

Skills

  • Proficiency with circuit simulation tools such as LTspice, PLECS, or SIMetrix
  • Comfort with power electronics test equipment, including oscilloscopes with differential and current probes, electronic loads, and power analyzers

Other requirements

  • Be a U.S. citizen, lawful permanent resident, protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain required U.S. Department of State authorizations

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Northwood Space’s careers site

About Northwood:

Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it.

Role:

Show full descriptionShow less

As an Electrical Engineer (Power Electronics), you will own the power conversion and distribution electronics for Prism, Northwood's 2.4 meter parabolic antenna for high-throughput satellite links. You will design the power systems that feed Prism's high power RF hardware and support electronics, taking them from architecture through prototype, testing, and production. This is a hands-on role for someone who has designed, built, and debugged power electronics that have to run reliably in the field.

Responsibilities:

  • Design power electronics for Prism, including AC-DC and DC-DC conversion, power distribution, and the supplies that drive high power RF amplifiers
  • Define Prism's power architecture and drive system trades across efficiency, thermal load, reliability, cost, and deployment speed
  • Design load switching, sequencing, and power path protection schemes, including fault detection and recovery
  • Perform schematic capture, PCB layout oversight, and bring-up of power hardware
  • Build circuit and system models to analyze and verify power system performance, including stability, transient response, and efficiency
  • Define interfaces between the power system and Prism's RF, digital, and motion control loads
  • Qualify designs through environmental and EMI/EMC testing

Basic Qualifications:

  • Bachelor's degree in electrical engineering or a related engineering discipline
  • 3-5+ years of power electronics hardware design experience
  • Hands-on experience designing switched-mode power converters (buck, boost, flyback, LLC, or similar) at hundreds of watts or more
  • Experience taking power hardware from schematic and layout through bring-up, characterization, and debug in the lab
  • Proficiency with circuit simulation tools such as LTspice, PLECS, or SIMetrix
  • Comfort with power electronics test equipment, including oscilloscopes with differential and current probes, electronic loads, and power analyzers

Preferred Qualifications:

  • Master’s degree or PhD in electrical engineering with a focus on power electronics
  • Kilowatt-class AC-DC and isolated DC-DC converter design, including power factor correction, magnetics, and wide-bandgap (GaN, SiC) power stages
  • Drain supply and bias design for GaN RF power amplifiers, including sequencing and low-ripple regulation
  • Protection circuitry design, including hot-swap, inrush limiting, overcurrent, reverse-polarity, and surge, lightning, and transient protection for grid-connected outdoor equipment
  • Converter stability, thermal design, and EMI/EMC mitigation for high-density power hardware, including input filter design and control loop compensation
  • Motor drive power electronics for antenna positioners or motion control systems
  • Design for manufacturing, production test development, and reliability qualification

Compensation:

Electrical Engineer/Level 2: $104,000-$130,000 per year

Electrical Engineer/Level 3: $122,400-$153,000 per year

Additional Information:

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Northwood Space is an Equal Opportunity Employer; employment with Northwood Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know at accommodations@northwoodspace.io

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 8 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 10 days ago

Electrical Engineer IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$130k–$135k/yrFull-timeOn-site

StrongChecked open todayPosted 18 days ago

See more like this