Electrical Engineer jobs

Protection & Controls Engineer

SpaceXSIMemphis, TNHybrid

Pay not listed

Key facts

Experience
3+ years
Degree
Bachelor's degree

Looks real. 2 things to check before you apply.

On SpaceXSI’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 3 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 85 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Design protection philosophies, diagrams, schematics, wiring, and relay panels from utility interconnection through facility buses.
  • Calculate, implement, maintain, and manage relay settings and logic for lines, buses, transformers, feeders, generators, and battery storage systems.
  • Perform short-circuit, coordination, and arc-flash studies; commission and test protection systems; analyze fault records and recommend changes.
  • Integrate protection systems with SCADA, RTUs, and facility monitoring, and support applicable NERC PRC evidence and testing.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Valid driver's license
  • Professional Engineering license, or actively working toward one (preferred)

Experience

  • 3+ years of protection and controls experience (settings, design, or commissioning) on medium- or high-voltage systems
  • 5+ years in a protection and controls role at a utility, independent power producer, EPC, relay manufacturer, or hyperscale / colocation data center operator (preferred)
  • Hands-on experience with SEL relays and software (AcSELerator QuickSet, synchroWAVe Event, or equivalent); GE, ABB, Siemens, or Beckwith experience also valued (preferred)
  • Short-circuit and coordination studies in ETAP, ASPEN OneLiner, CAPE, SKM, or EasyPower (preferred)
  • Transmission and distribution protection (line, bus, transformer, feeder) plus at least one of: generator protection, BESS/inverter-based resource protection, or mission-critical facility / data hall, (preferred)
  • Commissioning with Doble F6150, Omicron CMC, or equivalent; event-record analysis after faults (preferred)
  • Ability to support technicians in the field and remain effective during outages and event investigations (preferred)

Education

  • Bachelor's degree in electrical engineering, computer engineering, or another engineering discipline

Skills

  • SELogic or equivalent relay logic; settings templates; a formal settings management process (preferred)
  • Familiarity with DNP3, Modbus, IEC 61850, IEEE C37.118, IEEE C37.111, and IEEE C37.232 (preferred)
  • Working knowledge of IEEE C37.102, C37.91, C37.234, IEEE 1547 / 2800, and applicable NERC PRC standards (preferred)

On the job

  • Perform hands-on work in all environments (heat, cold, rain), in tight quarters or at heights
  • Remain focused in hazardous environments while wearing appropriate PPE
  • Lift up to 25 lbs unassisted

Other requirements

  • Work extended hours and weekends as needed to support construction, energization, and operations
  • Provide 24/7 on-call support for emergencies
  • Willing to work on-site in Memphis, TN; this is not a remote or hybrid role
  • Travel up to 25% for factory witness testing, vendor and OEM engagement, and supporting other sites

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From SpaceXSI’s careers site

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today, SpaceX is actively developing the technologies to make this possible, with the ultimate goal of making life multiplanetary and expanding consciousness to the stars.

Show full descriptionShow less

SpaceXSI is building Super Intelligence to help humanity understand the universe. Our teams are building the full Super Intelligence stack: from our Colossus supercomputers, to Grok models, to our suite of applications, including Grok Bot, Grok Build, Grok Imagine, Grok Voice, and X. We're creating a powerful flywheel where more compute trains better models, better models power more useful products, and what we learn from people using those products shapes what we build next.

PROTECTION & CONTROLS ENGINEER

Join the High Power Engineering team to design, set, commission, and maintain protection and control systems for large electrical infrastructure. As a Protection & Controls Engineer, you will own schemes and settings from the transmission interconnection through distribution, on-site generation, and battery energy storage, down to medium- and low-voltage buses serving data halls and other mission-critical loads. The position is based in Memphis, TN, with potential travel to other sites.

RESPONSIBILITIES:

  • Develop protection philosophy, one-line and three-line diagrams, DC control schematics, wiring diagrams, and relay panel layouts for the electrical system from the utility interconnection to facility buses
  • Calculate, implement, and maintain protective relay settings and logic for transmission lines, buses, power transformers, distribution feeders, generators, and battery energy storage / inverter-based resources
  • Specify relays, current and voltage transformers, trip circuits, lockout schemes, breaker-failure protection, and communications-assisted schemes (permissive, blocking, transfer trip)
  • Perform short-circuit, protective-device coordination, and arc-flash studies; keep settings aligned with the study of record as the system changes
  • Commission protection systems: functional checks, primary and secondary injection, end-to-end scheme tests, and in-service timing checks by using industry test sets (e.g. Doble, Omicron)
  • Collect and analyze fault and disturbance records (COMTRADE and equivalent); recommend setting or scheme changes after events, misoperations, or staged tests
  • Maintain the settings management database, as-left files, and firmware/config control for in-service relays
  • Integrate protection with SCADA, RTUs, and plant/facility monitoring: DNP3, Modbus, IEC 61850 (including GOOSE), and IEEE C37.118 synchrophasors as applicable
  • Support NERC PRC evidence and testing where the interconnection or generation/storage fleet requires it (e.g. PRC-005, PRC-019, PRC-024, PRC-027)
  • Work with field technicians, operators, and contractors during outages, switching, and troubleshooting. Stay hands-on at the panel
  • Apply IEEE C37 (including line, transformer, bus, and generator protection), NESC, NFPA 70 / 70E, IEEE 1547, and IEEE 2800 as they apply to the assets in scope

BASIC QUALIFICATIONS:

  • Bachelor's degree in electrical engineering, computer engineering, or another engineering discipline
  • 3+ years of protection and controls experience (settings, design, or commissioning) on medium or high-voltage systems

PREFERRED SKILLS AND EXPERIENCE:

  • 5+ years in a protection and controls role at a utility, independent power producer, EPC, relay manufacturer (e.g. SEL), or hyperscale / colocation data center operator
  • Hands-on experience with Schweitzer Engineering Laboratories (SEL) relays and software (AcSELerator QuickSet, synchroWAVe Event, or equivalent). GE, ABB, Siemens, or Beckwith experience also valued
  • SELogic or equivalent relay logic; settings templates; a formal settings management process
  • Short-circuit and coordination studies in ETAP, ASPEN OneLiner, CAPE, SKM, or EasyPower
  • Transmission and distribution protection (line, bus, transformer, feeder) plus at least one of: generator protection, BESS/inverter-based resource protection, or mission-critical facility / data hall medium-voltage protection
  • Commissioning with Doble F6150, Omicron CMC, or equivalent; event-record analysis after faults
  • Familiarity with DNP3, Modbus, IEC 61850, IEEE C37.118, IEEE C37.111, and IEEE C37.232
  • Working knowledge of IEEE C37.102 (generator), C37.91 (transformer), C37.234 (bus), IEEE 1547 / 2800 (interconnection and inverter-based resources), and applicable NERC PRC standards
  • Professional Engineering license, or actively working toward one
  • Ability to support technicians in the field and to remain effective during outages and event investigations

ADDITIONAL REQUIREMENTS:

  • Perform hands-on work in all environments (heat, cold, rain), in tight quarters or at heights
  • Work extended hours and weekends as needed to support construction, energization, and operations
  • Remain focused in hazardous environments while wearing appropriate PPE
  • Lift up to 25 lbs unassisted
  • Provide 24/7 on-call support for emergencies
  • Willing to work on-site in Memphis, TN – this is not a remote or hybrid role
  • Travel up to 25% for factory witness testing, vendor and OEM engagement, and supporting other sites
  • Valid driver's license

SpaceXSI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Electrical Engineer

SpaceXSI · Southaven, MS +1 place

Pay not listedFull-timeOn-site

Looks good2 to checkChecked open todayPosted 6 months ago

Electrical Engineer

OHM Advisors · Knoxville, TN +2 places

Full-time

StrongPay not listedChecked open todayPosted 22 days ago

See more like this