Electrical Engineer jobs

Senior Staff Electrical Engineer

Standard BotsBoston, MAFull-timeOn-sitePosted 23 days ago

$160k–$220k/yr listed by the employer

Key facts

Experience
10+ years
Degree
Bachelor's degree

Looks real and checked open today.

On Standard Bots’ own careers site (Ashby).

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Lead the Bolt hardware team, set electrical architecture, coordinate mechanical architecture, and plan prototype builds, tests, and design reviews.
  • Own hardware-side AMR safety certification, including certification plans, safety-function evidence, and test-lab campaigns.
  • Specify and integrate the battery pack, BMS, and charger, and make power-system architecture and component decisions.
  • Design schematics and high-current PCB layouts; bring up boards, create test plans, and debug issues on the bench and robot.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 10+ years designing, building, and testing power systems and PCBAs
  • Led the hardware of an AMR, AGV, or similar mobile robot through production
  • Taken an AMR or similar mobile machine through third-party safety certification, including ISO 3691-4, ANSI/RIA R15.08, UL 3100, ISO 13849 safety functions, evidence packages, and test-lab campaigns
  • Experience leading engineers through an NPI cycle
  • Taking products from prototype through NPI to volume manufacturing, including DFM/DFT, test fixtures, and yield improvement (preferred)

Education

  • Bachelor's or graduate degree in Electrical Engineering or a related field

Skills

  • Mastery of high-current distribution, pre-charge and protection circuits, DC/DC conversion, motor-drive power stages, and regenerative and bus-capacitance behavior
  • Working knowledge of BMS behavior, including balancing, SoC/SoH, protection limits, and CAN interface, and of specifying, qualifying, and integrating a vendor pack and charger
  • Working knowledge of IEC 62133 / UL 2271 at the pack interface and EMC (IEC 61000 series), including pre-compliance debugging
  • Proficient in Altium Designer for schematic capture and multilayer, high-current layout
  • Proficient in LTspice or similar simulation software and Python for test automation
  • Hands-on debugging with a scope, current probe, thermal camera, and bench instruments
  • Mechanical design of mobile robots, including chassis, drivetrain, or battery packaging (preferred)
  • Custom battery pack design, including cell selection, pack mechanical and thermal design, and BMS hardware (preferred)
  • Motor control (FOC, current sensing) and inverter design for traction or robot joints (preferred)
  • Real-time industrial fieldbuses (EtherCAT, CAN/CANopen) and safety fieldbus (preferred)

Other requirements

  • On-site role at the Boston-area office

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance
Dental & vision
Dental and vision insurance
Retirement plan
401(k)
Equity
Employee stock options for all full-time employees
Life & disability insurance
Life and disability insurance

Also: paid time off

Full job description

From Standard Bots’ careers site

ABOUT STANDARD BOTS

At Standard Bots, we're revolutionizing real-world automation by making robotic systems accessible to everyone. Our AI-powered platform enables robots to tackle unprecedented challenges through an intuitive instruction interface, bringing the power of software automation to physical spaces.

WHAT YOU'LL DO

Show full descriptionShow less

We're building Bolt, a mobile manipulation platform: an autonomous mobile base carrying our robot arms. We're looking for a Senior Staff Electrical Engineer to lead the hardware of that base, mechanical and electrical, from concept through a safety-certified fleet. You will set the hardware architecture, lead a team of mechanical and electrical engineers through prototype builds, test, and certification, and own the power system yourself: specifying and integrating the battery pack and charger from a battery manufacturer, and designing the high-current distribution, pre-charge and protection, safe power cutoff, and power delivery to drive motors, arms, and compute.

📍 LOCATION

This is an on-site role based at our new Boston-area office, where Bolt is designed, built, and tested, with some flexibility on days in the office once you're up to speed. On-site you'll build up a fully equipped electronics lab, a build area, a test floor, and the team steps from your desk.

RESPONSIBILITIES

  • Lead the Bolt hardware team of mechanical and electrical engineers: set the electrical architecture and work with the mechanical team to set the mechanical architecture, plan prototype builds and the test program, run design reviews, and drive decisions to closure with software, safety, manufacturing, and product
  • Own the hardware side of AMR safety certification with Functional Safety: the certification plan, the safety functions and their evidence, and the test-lab campaigns for ISO 3691-4, ANSI/RIA R15.08, and UL 3100
  • Contribute as an IC where your contributions can best be utilized
  • Specify, select, and integrate the battery pack, BMS, and charger from a battery manufacturer: requirements, vendor evaluation, BMS communication (CAN), charge and discharge limits, and pack-level safety and certification evidence
  • Drive key architecture and component decisions through requirements and trade studies (pack capacity, drive configuration, peak and regenerative current, thermal)
  • Do the hands-on, technically deep work: schematic capture, high-current PCB layout, board bring-up, test plans, and root-cause debugging on the bench and on the robot
  • Design for safety and certification: fault analysis, derating, and the power-cutoff paths that functional safety relies on (ISO 13849, IEC 62133 / UL 2271 at the pack interface, EMC)
  • Hire, mentor, and grow the hardware team, and be the primary technical contact for battery, charger, drive, and PCBA vendors

WHO YOU ARE

You've led the hardware of an AMR or comparable mobile robot from a blank page through safety certification and production, and you've designed and shipped its battery-powered systems yourself. You know the failure modes: inrush, regen on a full pack, ground loops, connector and busbar heating, a BMS that trips when you least expect it, and the safety function that fails validation a month before the audit. You can write a pack specification a vendor can build to and verify what they deliver. You lead by doing design work alongside the team. Our ideal candidate expects to spend roughly half their time on design/build/troubleshoot and half on team leadership, test, and certification.

SKILLS YOU'LL BRING

  • Experience: Bachelor's or graduate degree in Electrical Engineering (or related) and 10+ years designing, building, and testing power systems and PCBAs, including leading the hardware of an AMR, AGV, or similar mobile robot taken through production
  • AMR Safety Certification: You have taken an AMR or similar mobile machine through third-party safety certification (ISO 3691-4, ANSI/RIA R15.08, UL 3100), including ISO 13849 safety functions, the evidence package, and test-lab campaigns
  • Power Depth: Mastery of high-current distribution, pre-charge and protection circuits, DC/DC conversion, motor-drive power stages, and regen and bus-capacitance behavior
  • Battery Integration: Working knowledge of BMS behavior (balancing, SoC/SoH, protection limits, CAN interface) and how to specify, qualify, and integrate a vendor pack and charger
  • Compliance: Working knowledge of IEC 62133 / UL 2271 at the pack interface and EMC (IEC 61000 series) with pre-compliance debugging
  • Leadership: You have led engineers through an NPI cycle and made them better; you give direct, specific design feedback
  • Tool Fluency: Proficient in Altium Designer for schematic capture and multi-layer, high-current layout; LTspice or similar for simulation; Python for test automation
  • Debugging Mastery: Scope, current probe, thermal camera, and bench instruments; you document what you find and converge on a fix quickly
  • Clarity of Communication: Clear design documentation, crisp trade studies, and design reviews that make your peers better
  • Impact Driven: A reliable, manufacturable robot that ships beats an elegant one that never leaves the lab
  • Excelling in Ambitious Environments: You thrive in a fast-moving team with changing requirements and tight timelines

BONUS POINTS FOR

  • Mechanical design of mobile robots (chassis, drivetrain, battery packaging), enough to lead mechanical engineers well
  • Custom battery pack design (cell selection, pack mechanical and thermal design, BMS hardware)
  • Motor control (FOC, current sensing) and inverter design for traction or robot joints
  • Real-time industrial fieldbuses (EtherCAT, CAN/CANopen) and safety fieldbus
  • Taking products from prototype through NPI to volume manufacturing — DFM/DFT, test fixtures, yield improvement

COMPENSATION AND BENEFITS

The base salary range for this role is $160,000 to $220,000, depending on experience. Base salary is just one part of the overall compensation at Standard Bots. All Full-Time Employees are eligible for Employee Stock Options. We also offer a package of benefits including paid time off, medical/dental/vision insurance, life insurance, disability insurance, and 401(k) to regular full-time employees.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

See more like this