Above the typical $138k a year for mid-level Electrical Engineer jobs in CaliforniaHow we compare
How we compare. Typical is the median yearly pay of 170 mid-level Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.
Design and model high-speed analog and mixed-signal circuits and signal chains for electro-optic systems.
Simulate and verify circuits across process, temperature, and supply variations, then correlate models with measurement data.
Define and integrate high-speed interfaces between electronic ICs and photonic integrated circuits, including package and board-level interconnects.
Develop characterization and validation strategies using S-parameters, eye diagrams, and BER testing.
Summarised from the posting by AI and can be wrong. The full description is the source.
Requirements
Experience
3+ years of experience in high-speed analog, mixed-signal, or RF circuit design, with emphasis on multi-GHz bandwidths
Experience with high-speed lab characterization using high-bandwidth oscilloscopes, VNAs, BERTs, and spectrum analyzers
Experience designing high-speed circuits for optical communications, including modulator drivers, TIAs, or SerDes front-ends (preferred)
ASIC or custom IC design experience, including the flow from specification through tapeout and silicon validation (preferred)
Experience with high-speed package and interconnect design, including wirebond, flip-chip, or co-packaged optics integration (preferred)
Experience with electromagnetic simulation for high-speed interconnects and packaging, such as HFSS, Momentum, or CST (preferred)
Experience with photonic-electronic co-design or co-simulation, such as Lumerical Interconnect, VPI, or ADS co-simulation (preferred)
Experience working with silicon photonics or III-V electro-optic platforms (preferred)
Familiarity with reliability and qualification testing for high-speed electronic or electro-optic assemblies (preferred)
Education
Master's or PhD in electrical engineering, applied physics, or a related discipline
Skills
Strong foundation in analog and RF circuit design, including small-signal and large-signal analysis, noise analysis, and stability
Experience with circuit simulation tools such as Cadence Spectre, ADS, HFSS, or equivalent
Understanding of high-speed serial link architectures and signaling formats such as NRZ, PAM4, or coherent modulation
Working knowledge of semiconductor device physics and IC fabrication processes such as CMOS, SiGe BiCMOS, or III-V
Programming and data analysis skills, such as Python or MATLAB, for simulation automation, data processing, and visualization
Deep expertise in one or more of wideband amplifier design (>25 GHz), high-speed DAC/ADC interfaces, PLL/CDR design, or RF power amplifier design (preferred)
Familiarity with DSP concepts for optical links, such as FFE, DFE, and CTLE equalization, and optical performance metrics such as OSNR, OMA, and receiver sensitivity (preferred)
Other requirements
Willingness to work extended hours and weekends as needed
Your match
Sign in and add your resume to see which of this job's requirements it shows.
Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.
Benefits
Health insurance
Medical insurance for employees and dependents, with significant cost covered by the company
Dental & vision
Dental and vision insurance for employees and dependents, with significant cost covered by the company
Retirement plan
Access to a 401(k) retirement plan
Paid time off
Flexible PTO, including 3 weeks of accrued vacation and 10 company holidays per year
Parental leave
Paid parental leave
Equity
Eligibility for company stock options as a long-term incentive
Bonus
Eligibility for discretionary bonuses awarded for exceptional achievements
Relocation help
Relocation assistance to Los Angeles
Full job description
From Mesh Optical Technologies’ careers site
HIGH-SPEED MIXED SIGNAL DESIGN ENGINEER
Mesh Optical Technologies was founded on the belief that optical photons will be at the center of advanced technologies in the coming century. Making advanced technology ubiquitous means building at scale, and that’s exactly what we’re doing at Mesh.
Show full descriptionShow less
Our optical hardware platform requires tightly integrated high-speed electronic and photonic systems operating at tens of gigahertz and beyond—modulator drivers, trans-impedance amplifiers, SerDes interfaces, and the analog signal chains that connect them. We are seeking a High-Speed Mixed-Signal Design Engineer to architect, design, and validate the high-speed electronic systems that interface directly with our photonic integrated circuits. You will work across the boundary between electronics and photonics, from transistor-level circuit design through package and board-level integration, ensuring the electrical systems meet the bandwidth, linearity, and noise performance our optical links demand.
RESPONSIBILITIES:
Design and analyze high-speed analog and mixed-signal circuits for electro-optic systems, including modulator drivers, TIAs, CTLEs, limiting amplifiers, and clock/data recovery circuits
Develop and own circuit-level and system-level models for high-speed signal chains, incorporating device parasitics, package effects, and photonic component behavior
Perform transistor-level simulation and verification using industry tools (e.g., Cadence Virtuoso, Spectre, ADS, HFSS) across process corners, temperature, and supply variation
Architect high-speed electrical interfaces between electronic ICs and photonic integrated circuits, defining impedance matching, bandwidth targets, voltage swing, and power constraints
Lead or contribute to chip-to-package-to-board co-design, including high-speed interconnect design, SI/PI analysis, and signal integrity closure from die through PCB
Collaborate with PIC designers to co-optimize electro-optic performance across the driver–modulator and photodetector–TIA interfaces
Define characterization and validation strategies for high-speed electronic and electro-optic subsystems, including S-parameter measurements, eye diagram analysis, and BER testing
Analyze measurement data and correlate to simulation models, driving root-cause investigation and design iteration
Partner with manufacturing and test engineering teams to develop production test methods for high-speed electrical and electro-optic assemblies
Contribute to component selection, evaluation, and qualification for high-speed electronic devices (e.g., driver ICs, TIAs, CDRs, PLLs)
QUALIFICATIONS:
Master's or PhD in electrical engineering, applied physics, or a related discipline
3+ years of experience in high-speed analog, mixed-signal, or RF circuit design, with emphasis on circuits operating at multi-GHz bandwidths
Strong foundation in analog and RF circuit design principles, including small-signal and large-signal analysis, noise analysis, and stability
Experience with circuit simulation tools (e.g., Cadence Spectre, ADS, HFSS, or equivalent)
Understanding of high-speed serial link architectures and signaling formats (e.g., NRZ, PAM4, coherent modulation)
Experience with high-speed lab characterization, including use of high-bandwidth oscilloscopes, VNAs, BERTs, and spectrum analyzers
Working knowledge of semiconductor device physics and IC fabrication processes (CMOS, SiGe BiCMOS, or III-V)
Strong programming and data analysis skills (e.g., Python, MATLAB) for simulation automation, data processing, and visualization
Willingness to work extended hours and weekends as needed
PREFERRED EXPERIENCE:
Experience designing high-speed circuits for optical communications, including modulator drivers, TIAs, or SerDes front-ends
ASIC or custom IC design experience, including full design flow from specification through tapeout and silicon validation
Experience with high-speed package and interconnect design, including wirebond, flip-chip, or co-packaged optics integration
Deep expertise in one or more of: wideband amplifier design (>25 GHz), high-speed DAC/ADC interfaces, PLL/CDR design, or RF power amplifier design
Familiarity with DSP concepts relevant to optical links (e.g., FFE, DFE, CTLE equalization) and optical performance metrics (e.g., OSNR, OMA, receiver sensitivity)
Experience with electromagnetic simulation for high-speed interconnects and packaging (e.g., HFSS, Momentum, CST)
Experience with photonic-electronic co-design or co-simulation (e.g., Lumerical Interconnect, VPI, ADS co-simulation)
Experience working with silicon photonics or III-V electro-optic platforms
Familiarity with reliability and qualification testing for high-speed electronic or electro-optic assemblies