Manufacturing & Process Engineer jobs

Sr. Manufacturing Engineer

Lucid MotorsCasa Grande, AZOn-sitePosted 2 days ago

Pay not listed

Key facts

Schedule
12-hour shifts
Experience
5+ years
Degree
Bachelor's degree

Looks real and checked open today.

On Lucid Motors’ own careers site (Greenhouse).

Trust score ready Nov 27

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 27
See all 4 checksShow fewer
How we check

What you’ll do

  • Design, implement, and optimize manufacturing processes; own the manufacturing scorecard and improve safety, productivity, quality, cost, and inventory.
  • Prepare process documentation and training, and coordinate workstation readiness for new model launches.
  • Manage process changes and coordinate tooling, facility, and equipment installations.
  • Own quality targets and systems, lead root-cause analysis and corrective actions, and apply continuous-improvement methods.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Six Sigma, 8D, DOE, or similar certification or training (preferred)

Experience

  • 5 years of experience in manufacturing processes
  • CATIA and DELMIA experience
  • Experience in the automotive sector (preferred)
  • Experience with robotics, end of arm tooling, pick and place automation, position sensors, material handling, fluid dispensing, deflection analysis, vision systems, conveyors, and laser cleaning/met」と (preferred)
  • Experience with quality assurance systems (preferred)

Education

  • Bachelor’s degree in engineering or a STEM field

Skills

  • Knowledge of manufacturing processes and methods, and a general understanding of structuring a Bill of Material
  • Ability to read, write, speak, and understand English sufficiently to perform the essential duties
  • Project management skills (preferred)

On the job

  • Ability to stand and walk for 8–12 hours per shift on hard surfaces in a production environment
  • Frequent use of hands for handling tools, assembling components, and operating machinery, including fine motor skills and grip strength
  • Ability to lift, carry, push, or pull items weighing 10–50 lbs. regularly; occasional lifting up to 75 lbs. with assistance
Show 4 moreShow less
  • Routine reaching above shoulders, bending, twisting at the waist, and squatting
  • Continuous arm, hand, and wrist movements
  • Occasional use of steps to access different height level areas
  • Must wear required PPE, including safety shoes, gloves, protective sleeves, eye and hearing protection

Other requirements

  • Ability to influence outcomes and drive initiatives in complex environments
  • Ability to communicate clearly and professionally at various levels inside and outside the company

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance
Dental & vision
Dental and vision insurance
Retirement plan
401(k) retirement plan
Paid time off
Paid time off: up to 120 hours accrued for hourly/non-exempt employees and up to 160 hours accrued for salaried/exempt employees, Paid holidays and paid sick leave
Equity
Eligible employees may participate in the company equity program
Bonus
Eligible employees may participate in a discretionary annual cash incentive program
Life & disability insurance
Life and disability coverage

Full job description

From Lucid Motors’ careers site

About Lucid

At Lucid, we are creating exceptional mobility experiences through innovation to drive the world forward. Built on Lucid’s proprietary technology and software-defined vehicle architecture, our award-winning vehicles bring our “Compromise Nothing™” approach to the global automotive market. That means refusing to choose between performance and sustainability, design and engineering, ambition and integrity. In Lucid Air and Lucid Gravity, we have designed and built vehicles that have redefined their segments, combining exceptional range, performance, design, and expansive space in a single experience.

Show full descriptionShow less

We achieve this through deep vertical integration, with design, engineering, and production happening in-house across our global offices and manufacturing facilities. Our teams come from industries around the world, united by a shared commitment to excellence. By refusing to settle, you can help redefine what’s possible and shape the future of mobility.

About the Role

This is a Senior Manufacturing Engineer role reporting to the Senior Manager for AME. You will design, implement, and optimize robust manufacturing processes that meet our safety, delivery, cost, and quality objectives, and you will lead change management and continuous improvement using Six Sigma methodologies.

What You Own

  • KPI Performance: Own the manufacturing scorecard and decide which actions to take to improve safety, productivity, and quality while reducing cost and inventory.
  • Process Design: Design robust, high-volume manufacturing processes with high safety and ergonomic standards, including fixture design, work instruction sheets (WIS), line balancing with Industrial Engineering, Material Flow Engineering, MES, and Tooling, and accurate Bill of Material (B.O.M) and Bill of Process (B.O.P) records. Develop training programs that help production associates understand the process, including Critical to Safety and Critical to Quality requirements.
  • Launch Readiness: Own static and dynamic workstation readiness for new model programs, including procuring required items and confirming that Ergo Assessments and Safety Risk Assessments are completed and that issues are documented and tracked to closure. Evaluate project timelines, request FMEAs, review layout changes, and make the final call on process feasibility.
  • Change Management: Drive the Process Change Request (PCR) process, ensuring compliance and communicating changes to the production team. Coordinate tooling, facility, and equipment installation changes with the Tooling & Facilities Engineer, and evaluate new tools, equipment, and processes that improve quality, delivery, safety, and workforce efficiency.
  • Quality Systems: Own First Time Through (FTT) targets, including quality control plans and statistical process control (SPC) that reduce variability (Six Sigma). Develop and implement PFMEA standards and policies, and ensure manufacturing areas comply with the Quality Management System (QMS, ISO 9001).
  • Root Cause & Improvement: Lead the team through Root Cause and Containment Analysis (RCCA) and decide on Interim (ICA) and permanent (PCA) corrective actions for quality concerns. Apply 8D, Six Sigma, DOE, and lean manufacturing principles to remove waste and drive continuous improvement in safety, cost, delivery, and quality.
  • Cross-Functional Alignment: Build strong partnerships with Resident Product Engineering (RPE), New Product Introduction (NPI), Launch, and Advanced Manufacturing Engineering (AME) to understand how product differences affect GA area facilities, tooling, and processes. Act as the liaison between production and supporting areas (Launch, PVE, NPI, IE, Logistics, Suppliers) on process changes, deviations, and production issues.

What You Bring

  • 5 years of experience in manufacturing processes
  • Bachelor’s degree in engineering or a STEM field
  • CATIA and DELMIA experience
  • Knowledge of manufacturing processes and methods, and a general understanding of structuring a Bill of Material
  • Problem-solving methodology skills
  • Ability to influence outcomes and drive initiatives in complex environments, and to communicate clearly and professionally at various levels inside and outside the company

Preferred Qualifications

  • Experience in the automotive sector
  • Experience with robotics, end of arm tooling, pick and place automation, position sensors, material handling, fluid dispensing, deflection analysis, vision systems, conveyors, and laser cleaning/metrology equipment
  • Experience with quality assurance systems
  • Project management skills
  • Six Sigma, 8D, DOE, or similar certification or training

Physical Requirements

  • Standing and Walking: Ability to stand and walk for 8–12 hours per shift on hard surfaces in a production environment.
  • Manual Dexterity: Frequent use of hands for handling tools, assembling components, and operating machinery, including fine motor skills and grip strength.
  • Lifting and Carrying: Ability to lift, carry, push, or pull items weighing 10–50 lbs. regularly; occasional lifting up to 75 lbs. with assistance.
  • Reaching and Bending: Routine reaching above shoulders, bending, twisting at the waist, and squatting as part of process and tasks.
  • Repetitive Motions: Continuous arm, hand, and wrist movements for tasks such as fastening, positioning, and installing.
  • Climbing: Occasional use of steps to access different height level areas.
  • PPE Expectations: Must wear required PPE (safety shoes, gloves, protective sleeves, eye and hearing protection) per company safety standards.
  • Ability to read, write, speak, and understand English sufficiently to perform the essential duties of the position, including understanding work instructions, safety procedures, and job-related communications.

Work Requirement

  • This role is fully onsite with daily in-person presence is required.

Compensation & Benefits: Lucid offers a comprehensive and competitive benefits package including medical, dental, and vision insurance; life and disability coverage; paid time off; paid holidays, paid sick leave; and a 401(k) retirement plan. Hourly/non-exempt employees accrue up to 120 hours paid time off, and salaried/exempt employee accrue up to 160 hours paid time off. Eligible employees may also participate in Lucid’s equity program and/or a discretionary annual cash incentive program. Incentive and equity awards, if applicable, are determined based on individual performance, role scope, market considerations, and overall company results, in accordance with the terms of the applicable plans.

To all recruitment agencies: Lucid Motors does not accept agency resumes. Please do not forward resumes to Lucid Motors. Lucid Motors is not responsible for any fees related to unsolicited resumes.

At Lucid, we don’t just welcome diversity - we celebrate it! Lucid Motors is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under applicable State or Federal laws and regulations.

Equal Opportunity: At Lucid, we believe diversity strengthens everything we build. Lucid Motors is proud to be an equal opportunity employer and is committed to providing an inclusive workplace for all. We consider all qualified applicants without regard to race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity or expression, marital status, or any other characteristic protected by applicable state or federal laws and regulations.

Accessibility: Lucid Motors is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need any accommodation to participate in the application process, please contact us at TA-Operations <@> lucidmotors.com. This email address is designated solely for accommodation requests and is not monitored for job applications or resume submissions. To be considered for employment, all applications must be submitted through the Lucid Motors Careers website.

Candidate Data Privacy: By submitting your application, you understand and agree that your personal data will be processed in accordance with our Candidate Privacy Notice.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Production Engineer

MSR-FSR · Chandler, AZ

Full-timeOn-site

Looks goodPay not listedChecked open todayPosted 11 days ago

Equipment Engineer

Ralliant · Chandler, AZ

On-site

Looks goodPay not listedChecked open todayPosted 11 days ago

Senior Process Engineer

Triumvirate Environmental · Casa Grande, AZ

On-site

StrongPay not listedChecked open todayPosted 16 days ago

See more like this