Quality Control Inspector jobs

NDT Inspector

StandardAeroDallas, TXOn-sitePosted 1 month ago

Pay not listed

Key facts

Schedule
10-hour shifts
Degree
Bachelor's degree or equivalent

Looks real. 1 thing to check before you apply.

On StandardAero’s own careers site (Oracle Recruiting), checked open today.

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteOracle Recruiting board
  • Checked: Checked open todayOracle Recruiting board
  • Checked: No reposts foundOracle Recruiting board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Perform NDT inspections on gas turbine engines, aircraft components, parts, and accessories using approved methods, and document results in accordance with regulations and technical specifications.
  • Set up, calibrate, and check inspection equipment; prepare components and complete preliminary, in-process, and final inspections.
  • Complete inspection records, reports, and forms before product release or shipment, including reports used for statistical data.
  • Coordinate inspection workload with Production and Engineering, and provide technical support for repair, salvage, and warranty decisions.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Previous Level I certifications
  • Pass general, specific, and practical examinations in magnetic particle or penetrant inspection, with an average grade of at least 80% and at least 70% on each examination
  • Must be certifiable to NAS 410

Experience

  • Required on-the-job training in magnetic particle inspection (MPI) and fluorescent penetrant inspection (FPI)
  • May be required to pass NDT and inspection eye examinations and have NDT experience with applicable methods
  • 12–18 months of NDT inspection and evaluation experience with aircraft powerplants for FAA certification, or powerplant certification (preferred)

Education

  • High school diploma or equivalent
  • Associate’s or bachelor’s degree in Quality Assurance, Aerospace, Quality Control/Inspection, or a similar discipline, or equivalent work experience and training from governmental or vocational school

Skills

  • Knowledge of ISO 9000 or other regulatory specifications
  • Ability to read, interpret, and understand technical manuals, work specifications, service bulletins, and written work instructions
  • Ability to set up and calibrate equipment and prepare components for NDT inspection
  • Thorough working knowledge of FAA Part 145 regulations pertaining to inspection practices (preferred)
  • Familiarity with turbine engine principles, including test cell performance, assembly practices, vibration and failure analysis, and engine overhaul and repair procedures (preferred)

Other requirements

  • Must be authorized to work in the U.S.

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive healthcare, Health and dependent care flexible spending accounts
Retirement plan
401(k) with 100% company match; up to 5% vested
Paid time off
Paid time off starting on day one
Bonus
Bonus opportunities
Learning & tuition
Learning and training opportunities
Flexible schedule
Many shop positions offer a 4-day workweek with 10-hour shifts, typically Monday through Thursday
Life & disability insurance
Short- and long-term disability, Life and AD&D insurance

Full job description

From StandardAero’s careers site

NDT Inspector

Build an Aviation Career You’re Proud Of

Build your career with integrity by working at a company that doesn’t just treat you like a number. You’ll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you’ll be set up for success.

Test, and implement advanced technologies to improve aircraft performance, safety, and reliability, so we continue to deliver excellent aviation solutions. You’ll collaborate with other departments to ensure that our products and services meet the highest industry standards.

Show full descriptionShow less

As an NDT Inspector, you will perform approved NDT (non-destructive testing) inspection including fluorescent penetrant, magnetic particle, eddy current, X-Ray, and visual to document the servicing and repair of gas turbine engines, aircraft components, parts or accessories in accordance with the Repair Station Manual, Federal Aviation Regulations, manufacturers’ specifications, approved technical data and policies/procedures.

What you'll do:

  • Performs all designated non-destructive testing inspection duties in accordance with StandardAero policies and procedures and provide reports/records, such as FRA 337’s, that comply with all applicable Federal Aviation Regulations, IPMs, manufacturers’ specifications and the policies of StandardAero.
  • Sets up and calibrate equipment, prepare components for NDT inspection fully utilizing available equipment and processes including ensuring all equipment is in full working order by carrying out daily checks.
  • Assures that required preliminary, hidden, damage, progressive and final inspections are properly performed, and that proper inspection records, reports and forms are properly executed prior to releasing the product.
  • Completes NDT and appropriate (in-process) inspection of each overhauled or repaired engine, accessory, appliance and component at time of completion and prior to preparation for shipment.
  • Plans workload ensuring schedule times are achieved, in liaison with Production/Engineering teams.
  • May train and guide other NDT employees either as co-worker mentoring or instructing lower classifications.
  • May evaluate published technical data for timely and accurate applicability to NDT inspection procedures and develops/revises procedures as necessary to ensure reliable, quality products.
  • Provides technical support for development of salvage schemes for specific engines/components and takes appropriate actions in preventing release of defective, unserviceable, or un-airworthy parts.
  • Completes required inspection documents for compilation of statistical data as required.
  • Identifies opportunities for improvement processes, in working practices and team efficiency.
  • May perform warranty reviews and provide technical knowledge to warranty decision-making activities.
  • Creates investigation/production reports.

Position Requirements:

  • High school diploma or equivalent.
  • Associate’s or bachelor’s degree in Quality assurance, Aerospace, Quality Control/inspection, similar discipline, or equivalent work experience and training obtained from governmental or vocational training school programs.
  • Required on-the-job training program in magnetic particle inspection (MPI) and florescent penetrant inspection (FPI).
  • Previous Level I Certifications a must.
  • May be required to pass NDT and Inspection eye examinations and have NDT experience with applicable methods.
  • Knowledge of ISO 9000 or other regulatory specifications.
  • Must be able to read, interpret and understand technical manuals, work specifications, service bulletins and written work instructions, set up and calibrate equipment, prepare components for NDT inspection fully utilizing available equipment and processes.
  • Must pass general, specific and practical examinations in each magnetic particle or penetrant. (Must obtain an average grade of at least 80 percent with a minimum score of 70 percent on each examination).
  • Must be certifiable to NAS 410.
  • Must be authorized to work in the U.S.

Preferred Characteristics:

  • Prefer a minimum twelve to eighteen (12-18) months ND inspection and evaluation experience with aircraft powerplants for FAA certification or be powerplant certified.
  • Thorough working knowledge of FAA Part 145 regulations pertaining to inspection practices and familiarity with turbine engine principles including test cell performance, assembly practices, vibration and failure analysis, and general engine overhaul and repair procedures.

Benefits that make life better:

  • Comprehensive Healthcare
  • 401(k) with 100% company match; up to 5% vested
  • Paid Time Off starting on day one
  • Bonus opportunities
  • Health- & Dependent Care Flexible Spending Accounts
  • Short- & Long-Term Disability
  • Life & AD&D Insurance
  • Learning & Training opportunities
  • Enjoy a better work-life balance with many shop positions offering a 4-day workweek — 10-hour shifts, typically Monday through Thursday.

#BIZAV #LI-GH1

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

NDT Inspector (CFM56)

StandardAero · Dallas, TX

On-site

StrongPay not listedChecked open todayPosted 2 days ago

IQC Inspector

IntelliPro Group Inc. (agency) · Richardson, TX

$20–$23/hrFull-timeOn-site

StrongChecked open todayPosted 16 days ago

QC Inspector

IntelliPro Group Inc. (agency) · Richardson, TX

$20–$23/hrFull-timeOn-site

StrongChecked open todayPosted 16 days ago

Quality Inspector

Greenpoint Technologies · Denton, TX

On-site

Looks goodPay not listedChecked open todayPosted 1 month ago

Final Inspector/Optical

Hoya · Lewisville, TX

Pay not listedOn-site

Strong2 to checkChecked open todayPosted 2 months ago

See more like this