Welder & Fabricator jobs

Senior PCBA Rework Technician

K2 SpaceLos Angeles, CAOn-site

$38–$48/hr listed by the employer

Key facts

Pay per year
≈ $79k–$100kEstimate for full-time hours.
Experience
5+ years

Looks real. 1 thing to check before you apply.

On K2 Space’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 8 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Perform precision hand soldering and rework on PCBs, including replacing small SMT components and soldering BTCs.
  • Modify PCB traces and pads, install jumper wires, and support board troubleshooting with Engineering teams.
  • Build subassemblies and test harnesses, fabricate and inspect cable and harness assemblies, and kit components from inventory.
  • Maintain ESD-safe practices and support avionics testing infrastructure and flight builds.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • IPC-A-610, IPC-A-620, IPC-7711/7721, J-STD-001, or NASA-STD-8739.3 (preferred)

Experience

  • 5+ years of experience soldering electronic components for PCBAs
  • Experience with reballing and reworking fine-pitch BGAs
  • Experience building and inspecting flight-quality cable and harness assemblies
  • Experience fabricating harnesses from assembly drawings and schematics (preferred)
  • Experience with potting and encapsulation techniques (preferred)
  • Experience supporting environmental or functional testing of avionics assemblies (preferred)

Skills

  • Proficiency with soldering irons, hot air tools, and component handling for 0201, 0402, and BGA/QFN packages
  • Ability to rework and repair complex assemblies to IPC-7711/7721 standards
  • Ability to follow schematics, work instructions, and drawings with minimal supervision
  • Familiarity with ESD requirements for components and PCB/PCBAs
  • Ability to read, review, and redline electrical schematics and mechanical drawings (preferred)

On the job

  • Ability to perform repetitive tasks involving bending, twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and operating tools or machine controls
  • Ability to lift and carry parts or equipment up to 50 lbs. unassisted
  • Ability to stand for extended periods
Show 1 moreShow less
  • Ability to work extended hours and/or weekends as needed

Other requirements

  • Must be a U.S. person as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical coverage
Dental & vision
Dental and vision coverage
Parental leave
Paid parental leave
Equity
Equity in the company
Life & disability insurance
Life insurance

Also: paid time off

Full job description

From K2 Space’s careers site

K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space.

Show full descriptionShow less

The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits.

With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply.

The Role

You will play a key role in the development and production of the avionics systems for the K2 Mega-class satellite platform. This position requires deep technical expertise in reworking high reliability PCBAs, collaborating closely with Design and Test Engineers, and supporting avionics testing infrastructure and flight builds. You will also support wire harness fabrication as needed to help support the wider team.

Responsibilities

  • Perform precision hand soldering and rework of printed circuit boards (PCBs), including removal and replacement of 0402 and smaller SMT components using hot air, micro-soldering, and reflow techniques
  • Hand-solder (population/depopulation) Bottom Termination Components (BTC)
  • Modify traces or pads and run jumper wire on PCB
  • Support subassemblies and fabricate test harnesses for avionics testing
  • Perform component kitting from inventory as needed
  • Support hardware troubleshooting with Engineering teams to resolve board failures and design updates
  • Maintain ESD-safe practices at all times when handling electronics
  • Provide training to other technicians to help scale production across development and flight
  • Provide consistent process improvement feedback to Engineering and Production Leadership

Qualifications

  • 5+ years of experience soldering electronic components for PCBAs
  • Proficiency with basic tools: soldering irons, hot air tools, and component handling for 0201, 0402, and BGA/QFN packages
  • Experience with reballing and reworking fine-pitch BGAs
  • Demonstrated ability to rework and repair complex assemblies to IPC-7711/7721 standards
  • Experience building and inspecting flight-quality cable and harness assemblies
  • Ability to follow schematics, work instructions, and drawings with minimal supervision
  • Familiarity with ESD requirements for components and PCB/PCBAs
  • Demonstrated high level of ownership and problem-solving skills

Nice to Have

  • IPC-A-610, IPC-A-620, IPC-7711/7721, J-STD-001, NASA-STD-8739.3
  • Experience fabricating harnesses from assembly drawings and schematics
  • Ability to read, review, and redline electrical schematics and mechanical drawings
  • Experience with various potting and encapsulation techniques
  • Previous experience supporting environmental or functional testing of avionics assemblies
  • Strong communication skills with ability to communicate hardware and systems problems

Additional Requirements

  • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or machine controls
  • Must be able to lift and carry parts or equipment up to 50 lbs. unassisted
  • Must be able to stand for extended periods of time
  • Must be able to work extended hours and/or weekends as needed

Compensation and Benefits:

  • Hourly pay range for this non-exempt role is $38 – $48 + equity in the company
  • Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level
  • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks

If you don’t meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged!

Export Compliance

As defined in the ITAR, “U.S. Persons” include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a “U.S. Person.”

The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a “U.S. person” as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license.

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know.

Equal Opportunity

K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior Weld Technician

Relativity Space · Long Beach, CA

$34.42–$51.63/hrOn-site

StrongChecked open todayPosted 23 days ago

Senior Welder

Valar Atomics · Torrance, CA

$35–$50/hrOn-site

StrongOpen 2 monthsChecked open todayPosted 2 months ago

Soldering Technician

Mesh Optical Technologies · Gardena, CA +1 place

Pay not listedOn-site

Looks good2 to checkChecked open todayPosted 6 months ago

Weld Technician II

Relativity Space · Long Beach, CA

$28.27–$42.40/hrOn-site

Checked open todayPosted 2 days ago

See more like this