California jobs

Engineering Lab Manager

SpecterSan Francisco, CAFull-timeOn-site

Pay not listed

Looks real. 2 things to check before you apply.

On Specter’s own careers site (Ashby), checked open today.

  • To check: Posted by the employer 4 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • To check: No pay range listed, though one is likely required in CAAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: No reposts foundAshby board
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Install and weatherproof development units at outdoor test sites, and fabricate enclosures, brackets, and mounts for field use.
  • Set up and maintain lab networking, power, IT, cabling, switches, and servers.
  • Build server racks and plan hardware-in-the-loop system migrations, documenting cables and preserving running setups.
  • Organize lab layout, equipment tracking, maintenance, and repeatable operating procedures.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Organize lab space, tools, and processes so work is repeatable and problems do not recur
  • Experience directing technicians or contractors, or setting standards for others (preferred)
  • Exposure to RF hardware or antenna work (preferred)
  • Familiarity with hardware-in-the-loop (HIL) test setups and their cabling and state requirements (preferred)
  • Experience with structured cabling and server rack build-out (preferred)

Skills

  • Build, set up, and operate computers; comfortable with Linux and SSH
  • Fabricate physical prototypes using machining, welding, fixturing, 3D printing, or casting
  • Electronics prototyping, including breadboarding, basic programming, setting up PSUs, loads, and solar panels, and crimping or modifying wiring harnesses
  • Mounting, drilling, fastening, cable routing, and weatherproofing
  • Comfort with low-voltage wiring, power distribution, or basic electrical work (preferred)
  • VLANs, switch configuration, IP addressing, and physical network organization (preferred)

On the job

  • Comfortable and safe working at height and outdoors

Other requirements

  • Handle sensitive lab equipment carefully, including during moves and recabling

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Specter’s careers site

Company Background Specter's mission is to help automate the physical world.

Today, we build video sensors with state-of-the-art AI agents that answer any question, anywhere in their environments. Our systems can automatically detect and reason about any physical activity captured on camera, from security incidents (e.g. perimeter intrusion, theft, LPR), to safety monitoring (e.g. PPE detection, injured people), to operational efficiency (e.g. material tracking, congestion monitoring). We offer both long range wireless (1km range) and wired sensor variants to suit any deployment.

Show full descriptionShow less

Our co-founders Xerxes and Philip are passionate about empowering our partners in the fast approaching world of physical AI and robotics. We are a small, fast growing team who hail from Anduril, Tesla, Uber, and the U.S. Special Forces.

The Role You’ll build and maintain the lab and test sites the rest of engineering depends on. That spans standing up outdoor test installations, wiring the lab’s network and servers, mounting radios for RF testing, and building racks and moving live hardware into them without losing a beat. You scope it, source it, build it, and make sure it holds up. Just as important is the part that doesn’t show up in a single install: making the lab a system that runs without you standing over it. You’ll decide how the space is laid out, how equipment is tracked and maintained, and how the common jobs get done so they come out the same every time. As the team grows, you’ll direct technicians and set the standards they work to.

Responsibilities:

  • Field test installs: Install and weatherproof development units at test sites, including our roof. Route and protect cabling so it survives months of rain, heat, and wind.
  • Prototype fabrication: Take a bare set of electronics and turn it into something we can field: build or machine the enclosure, brackets, and mounts, and make it weatherproof and serviceable outdoors.
  • Supporting test infrastructure: Set up the networking, power, and IT that tests depend on. Pull and terminate cable, install switches, rack and power servers, and keep it organized and documented.
  • Rack builds and system moves: Assemble server racks from scratch and plan clean
  • migrations of our hardware-in-the-loop (HIL) systems. Map every cable and transplant running setups without losing state.
  • Lab operations and standards: Lay out the space, set up how equipment is tracked and maintained, and turn recurring jobs into repeatable processes so quality doesn’t depend on who’s on shift.
  • Spotting failures before they happen: Catch the “we probably shouldn’t drape a blanket over the servers, they’ll overheat” problems early. You have strong physical intuition for heat, power, cable strain, and weather.

Qualifications:

  • Creative problem-solving: Given a loose set of requirements and a deadline, your instinct is to start figuring out how, not to ask for a spec sheet. You improvise with what’s on hand and know which corners are safe to cut and which aren’t.
  • Organized and systematic: You set up the space, tools, and processes so work is repeatable and problems don’t recur. You can turn a messy, ad-hoc lab into something that runs predictably.
  • Computers and Linux: You can build a machine from parts, set it up, and operate it comfortably. Linux and SSH are second nature, and basic troubleshooting doesn’t slow you down.
  • Mechanical prototyping: You can fabricate and build physical things: machining, welding, fixturing, 3D printing, casting. You’re at home in a workshop turning an idea into an object.
  • Electronics prototyping: Breadboarding, basic programming, setting up PSUs, loads, and solar panels, and crimping or modifying wiring harnesses.
  • Handyman and assembly skills: Mounting, drilling, fastening, cable routing, and weatherproofing, all done properly. Comfortable and safe working at height and outdoors.
  • Careful with expensive hardware: You handle sensitive lab equipment with care, especially during moves and re-cabling, and you’d rather label the cables now than trace them later.

Nice to Have

  • Team leadership: Experience directing technicians or contractors, or setting standards that others work to.
  • RF and antennas: Exposure to RF hardware or antenna work.
  • Hardware-in-the-loop: Familiarity with HIL test setups and the cabling and state they depend on.
  • Structured cabling and rack build-out: Experience running clean, documented cabling and standing up server racks.
  • Low-voltage or electrical: Comfort with low-voltage wiring, power distribution, or basic electrical work.
  • Networking depth: VLANs, switch configuration, IP addressing, and keeping a growing physical network tidy.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Senior Accounting Manager

Specter · San Francisco, CA

Pay not listedFull-timeOn-site

Looks good2 to checkChecked open todayPosted 3 months ago

Senior Program Manager I

Rocket Lab Corporation · Long Beach, CA

$125k–$188k/yrOn-site

StrongChecked open todayPosted 24 days ago

See more like this