Manufacturing & Process Engineer jobs

Senior Machining Process Engineer – R&D

Vulcan ElementsResearch Triangle Park, NC +1 placeOn-site

Pay not listed

Key facts

Where
Research Triangle Park, NC · Durham, NC · on-site
Experience
5+ years
Degree
Bachelor's degree or equivalent

Looks real. 2 things to check before you apply.

On Vulcan Elements’ own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 4 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 85 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Characterize machining processes with metrology, surface inspection, SPC, and capability studies, and use data to reduce defects and losses.
  • Evaluate, specify, and qualify machining and finishing equipment and processes, including vendor trials and acceptance criteria.
  • Develop and optimize slicing, grinding, abrasive, and tumbling processes while balancing material yield, throughput, and dimensional targets.
  • Design tooling and fixtures, document validated processes, and hand them off to pilot production.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Direct experience machining sintered magnets, technical ceramics, carbide, glass, silicon/semiconductor wafers, or similar brittle materials
  • Experience with machine setup, alignment, fixturing, and troubleshooting vibration and chatter
  • 5+ years of process engineering experience in machining/finishing
  • Demonstrated ownership of a machining process from development through production release
  • Experience with NdFeB or other permanent magnet materials (preferred)
  • Experience in semiconductor wafering, optics fabrication, cutting tool manufacturing, or technical ceramics (preferred)

Education

  • B.S. in Mechanical Engineering, Manufacturing Engineering, or Materials Science, or equivalent hands-on experience

Skills

  • Working knowledge of diamond wire, wheel, and media specification
  • Practical understanding of coolant chemistry, delivery, filtration technologies, and swarf/sludge handling
  • Fluency in designed experiments, measurement system analysis, SPC, and capability studies
  • Strong command of GD&T interpretation and precision dimensional/surface metrology at micron scale
  • Ability to design and iterate workholding, carriers, and handling fixtures using SolidWorks, Fusion 360, or similar

Other requirements

  • Must be a U.S. Person due to required access to U.S. export-controlled information or facilities
  • Strict adherence to laboratory safety protocols and regulatory guidelines, including required PPE and safety training

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Vulcan Elements’ careers site

Vulcan Elements is manufacturing American rare-earth permanent magnets for a secure, resilient future. With a focus on national security and economic resiliency, we serve critical industries such as defense, aerospace, and automotive powering a high-technology future. Vulcan Elements is building a team of ambitious professionals committed to Mission Focus, Technical Excellence and Transparency.

Show full descriptionShow less

Sintered NdFeB magnets are a challenge to machine and finish: hard, brittle, chip-prone, corrosion-sensitive. As a Machining Process Engineer you will own the key performance indicators for machining and finishing processes that turn sintered magnet blocks into finished coating-ready parts. You will evaluate and optimize machining pathways, including wire sawing, precision grinding, tumbling, and other processes.

The ideal candidate is a hands-on abrasive machining expert who can also make a detailed and quantitative process flow diagram. You will improve existing machining methods, including slicing, grinding, chamfering, and surface prep. You will select and qualify new shaping processes from lab-scale development to validated, documented production handoff.

Responsibilities

Process Characterization, Metrology & Quality

  • Metrology, surface finish, and inspection methods
  • Establish SPC and capability baselines and drive loss/defect rates down with data

Equipment Specification & New Process Introduction (NPI)

  • Evaluate, specify, and justify new machining and finishing processes to Vulcan; run vendor trials, define acceptance criteria.
  • Document developed processes and hand off validated, capable processes to pilot production — including processes destined for future high-volume magnet factory programs.

Optimization of Existing Machining Processes

  • Develop and optimize slicing, grinding, abrasive, tumbling processes
  • Minimize loss and maximize material yield while holding thickness tolerance, TTV, bow, and warp targets; quantify the yield-vs-throughput trade space for varying magnet geometries.
  • Development of novel tooling and fixturing as needed
  • Understand and quantify surface effects on downstream coating adhesion, corrosion, and magnetic performance.

Responsibilities and tasks outlined are not exhaustive and may change as determined by the needs of the business

We are looking for depth in abrasive machining plus the range to own everything around it:

  • Abrasive Machining of Hard/Brittle Materials: Direct experience machining sintered magnets, technical ceramics, carbide, glass, silicon/semiconductor wafers, or similar brittle materials.
  • Diamond Tooling: Working knowledge of diamond wire, wheel, and media specification.
  • Machine Craft: Comfortable at the machine: setup, alignment, fixturing, troubleshooting vibration and chatter.
  • Coolant & Filtration Systems: Practical understanding of coolant chemistry, delivery, filtration technologies, and swarf/sludge handling.
  • Statistics & DOE: Fluency in designed experiments, measurement system analysis, SPC, and capability studies.
  • Metrology & GD&T: Strong command of GD&T interpretation and precision dimensional/surface metrology at micron scale.
  • CAD & Fixture Design: Able to design and iterate workholding, carriers, and handling fixtures (SolidWorks, Fusion 360, or similar).

Qualifications

  • B.S. in Mechanical Engineering, Manufacturing Engineering, Materials Science, or equivalent hands-on experience.
  • 5+ years of process engineering experience in machining/finishing.
  • Demonstrated ownership of a machining process from development through production release.
  • Experience with NdFeB or other permanent magnet materials is a strong plus, but we will gladly teach magnets to someone who deeply knows grinding.

Must be a U.S. Person due to required access to U.S. export-controlled information or facilities.

Desired Skills

  • Experience in semiconductor wafering, optics fabrication, cutting tool manufacturing, or technical ceramics.

Laboratory Safety and PPE Requirements

This role requires strict adherence to all laboratory safety protocols and regulatory guidelines. Employees must consistently wear appropriate personal protective equipment (PPE), including lab coats, safety glasses, gloves, and any additional gear required for specific materials or processes. The position involves working around equipment and procedures that present cut hazards and other physical risks associated with slicing, grinding, and tumbling operations. Team members must follow all established safety rules, use tools and machinery only as trained, and maintain awareness of mechanical pinch points, sharp components, and moving parts.

Employees are expected to maintain a clean and compliant work area, promptly report any unsafe conditions, and complete all required safety training. A strong commitment to maintaining a safe and compliant laboratory environment is essential for success in this role.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs in North Carolina

Senior Process Engineer

Fortune Brands · New London, NC

$80k–$127k/yrFull-timeOn-site

StrongChecked open todayPosted 26 days ago

Senior Process Engineer

Kyowa Kirin North America · Sanford, NC

$130k–$145k/yrHybrid

StrongChecked open todayPosted 26 days ago

Process Engineer

Revlon Corporate · Oxford, NC

$75k–$95k/yrFull-timeOn-site

StrongChecked open todayPosted 15 days ago

Process Engineer

US Conec, Ltd. · Hickory, NC

StrongPay not listedChecked open todayPosted 1 month ago

Process Engineer

ITAC · Wilmington, NC

$84k–$115k/yrContractOn-site

StrongOpen 3 monthsLast seen open yesterdayPosted 3 months ago

See more like this