Quality Control Inspector jobs

Quality Control Technician

Skild AISan Mateo, CAOn-site5+ years experiencePosted 19 days ago

$70k–$150k/yr listed by the employer

Above the typical $73k a year for Quality Control Inspector jobs in California (all levels)How we compare

How we compare. Typical is the median yearly pay of 151 Quality Control Inspector jobs in California (all levels) that list pay, from the employers' own postings. About means within 5%.

Looks real. 1 thing to check before you apply.

On Skild AI’s own careers site (Greenhouse), checked open today.

  • To check: Wide pay range: top of the range is 2.14× the bottomAsk what the job pays at your level before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 6 checksShow fewer
How we check

What you’ll do

  • Inspect incoming components, materials, and subassemblies against drawings, specifications, samples, and inspection criteria.
  • Perform in-process and final inspections of robots and accessories, verifying workmanship, assembly details, records, and acceptance criteria.
  • Inspect returned RMA robots and accessories, record their condition and discrepancies, and communicate findings to repair personnel.
  • Document inspection results, identify and segregate nonconforming products, and escalate issues for disposition.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • At least 5 years of experience in quality control, quality inspection, or a similar role supporting electro-mechanical manufacturing (preferred)
  • Experience performing incoming, in-process, and final inspections of mechanical parts, electrical components, or assembled products (preferred)
  • Hands-on experience using calipers, micrometers, and other inspection or measuring equipment (preferred)
  • Experience evaluating electro-mechanical assembly workmanship, including hardware installation, PCBA placement, cable routing, connector engagement, and labeling (preferred)
  • Experience documenting defects, maintaining traceable inspection records, and handling nonconforming material through established procedures (preferred)
  • Experience inspecting robots, automated equipment, or similar complex electro-mechanical products (preferred)
  • Experience documenting RMA product condition and supporting repair or failure-analysis teams (preferred)
  • Experience with ERP or product lifecycle management systems, such as Rootstock and Arena, and supporting corrective actions or continuous improvement (preferred)

Skills

  • Ability to read and interpret engineering drawings, dimensions, tolerances, specifications, bills of materials, and inspection instructions (preferred)
  • Familiarity with geometric dimensioning and tolerancing, sampling plans, and applicable workmanship standards (preferred)
  • Experience using Google Docs, Google Sheets, email, and electronic quality or production systems (preferred)

On the job

  • Regular sitting, standing, and walking; close visual inspection and hands-on use of inspection tools; bending and reaching (with or without reasonable accommodation)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Skild AI’s careers site

Company Overview

At Skild AI, we are building the world's first general purpose robotic intelligence that is robust and adapts to unseen scenarios without failing. We believe massive scale through data-driven machine learning is the key to unlocking these capabilities for the widespread deployment of robots within society. Our team consists of individuals with varying levels of experience and backgrounds, from new graduates to domain experts. Relevant industry experience is important, but ultimately less so than your demonstrated abilities and attitude. We are looking for passionate individuals who are eager to explore uncharted waters and contribute to our innovative projects.

Show full descriptionShow less

Position Overview

Join Skild AI’s manufacturing team to help ensure robots, accessories, and incoming materials meet design requirements and quality standards. In this hands-on role, you will perform in-process and final inspections, verify incoming material conformity, and complete visual inspections of returned robots and accessories. You will document findings, identify nonconforming products, and work with manufacturing and engineering to resolve quality issues.

Responsibilities

  • Inspect incoming components, materials, and subassemblies against engineering drawings, specifications, approved samples, and applicable inspection criteria to verify design conformity and quality.
  • Perform in-line and in-process inspections at designated assembly checkpoints. Verify workmanship, component placement, hardware installation, cable routing, connector seating, labeling, and other defined acceptance criteria.
  • Complete final inspections of manufactured robots and accessories before release. Verify required inspection and test records are complete and products meet documented acceptance criteria.
  • Perform visual receiving inspections of all incoming return material authorization (RMA) robots and accessories. Document physical condition, visible damage, missing components, identification labels, and other observed discrepancies.
  • Record RMA inspection findings and photographs, as appropriate, and communicate observations to repair personnel. Distinguish observed conditions from suspected causes requiring further evaluation.
  • Use appropriate measuring instruments, inspection tools, and visual inspection methods to check dimensions, fit, finish, and assembly quality. Verify equipment calibration status before use.
  • Identify, label, and segregate nonconforming material or products according to established procedures. Document discrepancies and escalate issues for authorized disposition.
  • Maintain accurate inspection records, checklists, and quality data, including part numbers, serial numbers, inspection results, and supporting evidence as required.
  • Communicate recurring defects and quality trends to manufacturing, engineering, and quality personnel. Support root-cause investigations, corrective actions, and improvements to inspection processes.
  • Coordinate inspections with production and receiving priorities while maintaining consistent acceptance standards. Follow safety, material handling, and 5S practices and perform other assigned quality duties.

Preferred Qualifications

  • At least 5 years of experience in quality control, quality inspection, or a similar role supporting electro-mechanical manufacturing.
  • Experience performing incoming, in-process, and final inspections of mechanical parts, electrical components, or assembled products.
  • Ability to read and interpret engineering drawings, dimensions, tolerances, specifications, bills of materials, and inspection instructions.
  • Hands-on experience using calipers, micrometers, and other inspection or measuring equipment appropriate to the product.
  • Ability to evaluate electro-mechanical assembly workmanship, including hardware installation, PCBA placement, cable routing, connector engagement, and labeling.
  • Strong attention to detail and sound judgment when comparing inspection results with documented acceptance criteria.
  • Experience documenting defects, maintaining traceable inspection records, and handling nonconforming material through established procedures.
  • Clear written and verbal communication skills, including the ability to describe defects objectively and work effectively with production, receiving, repair, and engineering teams.
  • Ability to organize inspection priorities, work independently within defined procedures, and escalate unclear requirements or quality concerns.
  • Comfort using Google Docs, Google Sheets, email, and electronic quality or production systems to record and communicate inspection results.

Additional Experience We Value

  • Experience inspecting robots, automated equipment, or similar complex electro-mechanical products.
  • Experience documenting the condition of RMA products and supporting repair or failure-analysis teams.
  • Familiarity with geometric dimensioning and tolerancing, sampling plans, and applicable workmanship standards.
  • Experience with ERP or product lifecycle management systems, such as Rootstock and Arena, and supporting corrective actions or continuous improvement.

Physical Requirements

Base Salary Range

$70,000—$150,000 USD

The role involves regular sitting, standing, and walking in a manufacturing environment, as well as close visual inspection and hands-on use of inspection tools. Handling components and accessing inspection points on robots and accessories may require bending and reaching. Essential job functions may be performed with or without reasonable accommodation.

Something wrong with this job? Report it

Similar jobs nearby

Quality Technician

Vertex Sigma Software · Foster City, CA

Pay not listedOn-site

Looks good2 to checkLast seen open yesterdayPosted 6 months ago

QA Technician

AMAX · Fremont, CA

Full-timeOn-site

Looks goodPay not listedLast seen open yesterdayPosted 16 days ago

Test Technician III

Industrial Electric Manufacturing · Fremont, CA

$30.16–$38.57/hrOn-site

Checked open todayPosted yesterday

Test Technician I

Industrial Electric Manufacturing · Fremont, CA

$23.55–$30.75/hrOn-site

Checked open todayPosted yesterday

See more like this