Assembler jobs

Propulsion Technician (Super Heavy Booster Propulsion Systems)

SpaceXHawthorne, CAOn-site

$23–$27/hr listed by the employer

Key facts

Pay per year
≈ $48k–$56k
Below the typical $71k a year for Assembler jobs in California (all levels)How we compare

How we compare. ≈ $48k–$56k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 167 Assembler jobs in California (all levels) that list pay, from the employers' own postings. About means within 5%.

Schedule
Weekends, 1st or 2nd shift
Experience
1+ years

This job is closed.

The employer took it down 2 days ago, after 19 days open. Here are similar open jobs.

  • To check: Posted by the employer 8 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Note: Last seen open 10 days agoLive check
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

Similar open jobs

Manufacturing Technician

Skild AI · San Mateo, CA

$70k–$150k/yr · see postingOn-site

Wide pay rangeChecked open todayPosted 19 days ago

See more like this

What you’ll do

  • Build and test propulsion assemblies and booster subassemblies, including fluid-system and avionics components.
  • Perform precision assembly tasks such as alignment, brazing, torquing, wiring, crimping, proof-pressure testing, and hi-pot testing.
  • Follow procedures, specifications, and work/test instructions while maintaining build quality and reporting completed work.
  • Troubleshoot failures and work with engineering, tooling, quality, and design teams to resolve issues and improve designs, instructions, and processes.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • A&P license (preferred)

Experience

  • 1+ years of experience in manufacturing/assembly, welding, or testing, OR completion of a relevant trade school
  • 3+ years of aerospace component testing experience (preferred)
  • Training in assembly or testing of propulsion, aviation, or aerospace hardware (preferred)
  • Experience operating a brazement furnace (preferred)
  • Experience working with thin-walled tubing (preferred)
  • Experience working with Inconel, titanium, aluminum, nickel, and stainless steel (preferred)
  • Lean manufacturing (5S) knowledge and experience (preferred)
  • Experience with pressure, temperature, and flow measurement devices and mechanical/electrical systems (preferred)

Education

  • High school diploma or equivalency certificate

Skills

  • High-pressure testing knowledge (preferred)
  • High-voltage testing knowledge (preferred)
  • Knowledge of orbital tube welding (OTW) (preferred)
  • Basic computer experience (preferred)

On the job

  • Must be able to lift 50 lbs assisted and stand for extended periods

Other requirements

  • Must be able to travel to other sites if needed
  • Must be able to work first shift (~4:00 am–~2:30 pm) or second shift (~2:30 pm–~1:00 am)
  • Must be able to support overtime and weekend work requests
  • Must be a U.S. citizen or national, U.S. lawful permanent resident, refugee, or asylee, or be eligible to obtain required U.S. Department of State authorizations
  • Ability to communicate verbally and in writing with engineering and production teams (preferred)

Benefits

Health insurance
Access to comprehensive medical coverage.
Dental & vision
Access to comprehensive vision and dental coverage.
Retirement plan
Access to a 401(k) retirement plan.
Paid time off
May accrue 3 weeks of paid vacation., Eligible for 10 or more paid holidays per year.
Parental leave
Paid parental leave.
Equity
May be eligible for long-term incentives, including company stock, stock options, or long-term cash awards., Employee Stock Purchase Plan with the ability to purchase additional stock at a discount.
Bonus
Potential discretionary bonuses.
Life & disability insurance
Short- and long-term disability insurance and life insurance.
Other
Various other discounts and perks.

Full job description

From SpaceX’s careers site

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

PROPULSION TECHNICIAN (SUPER HEAVY PROPULSION SYSTEMS)

Show full descriptionShow less

The propulsion systems technician team serve as hardware build and test experts for Booster subassembly prop systems - Unique weldments and avionics subassemblies that provide increased performance and operational capability to Raptor and Super Heavy. You will build and test propulsion assemblies for maximum reliability that need to perform in extreme dynamic environments.

As a technician, you will be responsible for maintaining a high standard of build quality and ensuring your work scope is performed correctly. You will partner with engineers on the floor to develop booster prop subs production systems. Technicians in this role will be capable of understanding component functionality to be able to assist in troubleshooting or recognizing potential hazards/issues before they occur and helping to update work instructions/processes to reduce future issues and increase personnel safety.

RESPONSIBILITIES:

  • Deliver state-of-the-art, high-quality propulsion
  • Collaborate with engineering and leadership to achieve component delivery rate in a reliable manner
  • Set the standard for a rigorous and efficient technician team by operating with high efficiency and utilization across a broad mix of products. Perform work according to procedures, specifications and work/test instructions, and communicate daily work completion to report to leadership
  • Execute daily precision manufacturing tasks, Assemble and fit-up subassemblies for fluid systems, including precision alignment, braze joints, fastener torquing, populating avionics connector pin-out with exact wire routing and crimping, conducting proof pressure testing on assemblies, and hi-pot electrical testing for insulation integrity
  • Troubleshoot failure modes and collaborate with design, tooling, quality, and engineering teams to resolve technical issues, recommend improvements to designs/instructions/processes for enhanced reliability, manufacturability, and production rates, and transition products from design to high-volume production

BASIC QUALIFICATIONS:

  • High school diploma or equivalency certificate
  • 1+ years of experience working in a manufacturing/assembly, welding, or testing role OR completion from a relevant trade school

PREFERRED SKILLS AND EXPERIENCE:

  • 3+ years of aerospace component testing experience
  • Trained in assembly or testing of propulsion, aviation or aerospace hardware
  • High pressure testing knowledge
  • High voltage testing knowledge
  • A&P license
  • Experience and knowledge operating brazement furnace
  • Experience working with thin-walled tubing
  • Experience working with Inconel, titanium, aluminum, nickel, and stainless steel
  • Knowledge of orbital tube welding (OTW)
  • Lean manufacturing (5S) knowledge and experience
  • High attention to detail in order to ensure safety and accuracy of testing procedures
  • Experience with pressure/temperature/flow measurement devices and mechanical/electrical systems
  • Strong mathematical, problem-solving, and decision-making skills. Basic computer experience
  • The ability to effectively communicate (verbal and written) with engineering and production teams at all levels of the business
  • The ability to work autonomously or as part of a team to achieve inspiring production goals

ADDITIONAL REQUIREMENTS:

  • Must be able to travel to other sites if needed
  • Must be able to lift 50lbs assisted and stand for extended periods of time
  • Must be able to work first shift (~4:00am – ~2:30PM) or second shift (~2:30PM – ~1:00AM)
  • Must be able to support overtime and weekend work requests

COMPENSATION AND BENEFITS:

Pay range: Propulsion Technician/Level 1: $23.00 - $27.00/hour Propulsion Technician/Level 2: $26.00 - $32.50/hour Propulsion Technician/Level 3: $31.00 - $38.00/hour

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year.

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Something wrong with this job? Report it · This flag looks wrong