Manufacturing & Production jobs

Painter II

ManitowocPort Washington, WIOn-sitePosted 4 days ago

Pay not listed

Looks real and checked open today.

On Manitowoc’s own careers site (Oracle Recruiting).

Trust score ready Nov 25

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteOracle Recruiting board
  • Checked: Checked open todayOracle Recruiting board
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 25
See all 4 checksShow fewer
How we check

What you’ll do

  • Prepare units and parts for painting by cleaning, sanding, masking, and protecting surfaces.
  • Mix and apply paint finishes, monitor viscosity and airflow, and measure film thickness.
  • Operate blasting, sanding, spraying, lifting, and material-handling equipment.
  • Inspect materials, report defects, apply decals, and complete production charts or washer titrations.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Forklift certification (preferred)

Experience

  • Maintain departmental housekeeping and 5S standards

Education

  • High school diploma or GED (preferred)

Skills

  • Considerable skill using various types of paint to obtain automotive standard finishes
  • Ability to read and interpret safety rules, operating and maintenance instructions, and procedures manuals
  • Ability to perform arithmetic with whole numbers, fractions, and decimals, and compute rates, ratios, and percentages
  • Ability to create and interpret data collection tools
  • Basic computer skills and working knowledge of Microsoft Office applications (preferred)

On the job

  • Frequent lifting or moving of up to 50 pounds
  • Frequently stand, reach, climb or balance, and stoop, kneel, crouch, or crawl

Other requirements

  • Perform job functions safely, wear required PPE, and follow job-specific and facility-wide safety and health procedures
  • Participate in safety and health training and demonstrate competency based on training received
  • Report safety and health issues, unsafe acts, and safety suggestions to management, or correct issues when able

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Manitowoc’s careers site

Minimum Job Requirements:

  • Considerable skill required in the use of various types of paint to obtain automotive standard finishes.
  • Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedures manuals.
  • Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, fractions, and decimals; compute rates, ratios and percentages.
  • Must be able to create/interpret various data collection tools.

Essential Job Functions:

  • May be required to hand blast and operate an 8–12 wheel roto blaster.
  • Use of wet & dry film thickness gauges.
  • Understand and follow hazard waste barrel guidelines.
Show full descriptionShow less
  • Operate orbital sander to prepare units, parts and/or any sub-straight material prior to finish.
  • Prepare units and parts by using masking tape, caps, plugs, plastic, etc. when needed to protect areas from coming in contact with paint.
  • Use overheads, Blue Giants and/or forklifts to load and unload parts carts or monorail systems.
  • Ensure all parts and units are free and clean of grease, oil and/or any other containment that may jeopardize paint integrity.
  • Monitor and measure air flow using an anemometer.
  • Mix finishes to the correct ratio prior to application.
  • Detect and report defective materials per work instructions.
  • Operate airless spray, HVLP, air assisted spray and/or electro-static spray equipment to apply base, protective and/or finished coats.
  • Monitor viscosity of all finishes daily by using various Zahn cups.
  • Maintain cleanliness on all spray related equipment.
  • Apply any required decals to completed units per decal installation drawings.
  • Complete SPC charts and/or titration of washers daily.
  • Other duties as determined by supervision.

Working Environment:

This position is located on the production shop floor, in multiple buildings. While performing the duties of this job, the employee is regularly required to use tools or controls. The employee is frequently required to stand, reach, climb or balance; stoop, kneel, crouch, or crawl. Incumbent will work in a typical paint environment including the use of solvents, adhesives, hydraulic oil, petroleum products, etc. There is frequent lifting and/or moving of up to 50 pounds.

Education & Experience Requirements:

  • High school diploma or general education degree (GED) preferred.

Health & Safety Requirements:

  • Maintain departmental housekeeping and 5S standards.
  • Perform job functions in a safe manner.
  • Wear all Personal Protective Equipment (P.P.E.) required by Company Policy for the job being performed.
  • Know and follow established job specific and facility wide safety and health procedures and rules.
  • Actively participate in safety and health training and demonstrate competency based on training received.
  • Bring safety and health issues, unsafe acts, and safety suggestions to management’s attention or correct those you can.
  • Employees who are required to wear half or full face respirators must take and pass a pulmonary function test annually, as well as be fit tested annually and must complete a medical surveillance questionnaire each year.
  • No facial hair is permitted that may interfere with the seal of the respirator.
  • Areas that utilize air supplied hoods; there are no medical requirement but must complete a medical surveillance questionnaire each year.
  • Responsible for collection of paint related waste associated with pain gun flush activities. Painters will receive introductory and annual training related to the hazardous waste collection of gun flush solvent. Training will cover hazards of hazardous waste, collection methods, spill prevention methods, bonding/grounding to be utilized, emergency shutdown procedures for paint/solvent lines, proper labeling and dating of containers, storage requirements and time frames, spill reporting and emergency evacuation procedures, and containment procedures.

Preferred Qualifications:

  • Possess basic computer skills with a working knowledge of Microsoft Office Applications.
  • Forklift certification

The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Assembler II

Manitowoc · Port Washington, WI

On-site

StrongPay not listedChecked open todayPosted 23 days ago

Machinist

Manitowoc · Port Washington, WI

On-site

StrongPay not listedChecked open todayPosted 1 month ago

Welder

Manitowoc · Port Washington, WI

On-site

StrongPay not listedChecked open todayPosted 1 month ago

Painter, Aircraft II

StandardAero · Springfield, IL

$26.41–$39.62/hrOn-site

StrongChecked open todayPosted 1 month ago

Painter II

New Flyer · Anniston, AL

Pay not listedFull-timeOn-site

Looks good2 to checkLast seen open yesterdayPosted 3 months ago

See more like this