Electrical Engineer jobs

Principal Power Electronics Engineer

ON.energyHouston, TX +3 placesPosted 3 days ago

Pay not listed

Key facts

Where
Houston, TX · Miami, FL · Reston, VA · Tysons
Experience
8+ years

Looks real. 1 thing to check before you apply.

On ON.energy’s own careers site (Greenhouse), checked open today.

  • To check: No pay range listed, though one is likely required in VAAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Trust score 89 / 100 · Looks good
See all 4 checksShow fewer
How we check

What you’ll do

  • Own and tune MW-scale PCS inverter control and protection settings for GFL and GFM operation.
  • Plan and lead lab, factory, site, and grid-integration testing; analyze waveforms and report results.
  • Demonstrate grid-code ride-through and fault compliance, and investigate weak-grid and converter interaction behavior.
  • Lead PCS product design and supplier technical reviews, including firmware releases and inverter qualification.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 8+ years of hands-on power electronics engineering in project-based or industrial settings
  • System-level design experience on MW-scale power electronics equipment
  • Understanding of how BESS integrates with power electronics equipment
  • Hands-on control design or tuning of three-phase grid-connected inverters, including dq current control, PLL and synchronization, and DC-link control
  • Direct experience with ride-through and fault behavior of inverter-based resources and the grid codes that govern them
  • Experience planning and running tests on MW-scale inverters or BESS in lab, FAT, or site commissioning settings
  • Experience with BESS, UPS/mission-critical, or utility-scale infrastructure projects, including IEC 62040-3 performance classes (preferred)
  • Experience with paralleled converters on common AC and DC buses, including load sharing, zero-sequence and circulating-current control, and interleaving (preferred)
  • Grid-integration testing at a national lab or accredited facility (preferred)
  • Hands-on use of PSCAD, MATLAB/Simulink, or real-time simulation (RTDS, OPAL-RT, Typhoon HIL) (preferred)
  • ERCOT interconnection experience, including NOGRR 245/282 or large-load ride-through (preferred)
  • Experience working with an inverter OEM's firmware and parameter sets as the customer (preferred)

Education

  • Bachelor's degree in Electrical Engineering, Power Electronics Engineering, or a similar field
  • MS or PhD (preferred)

Skills

  • Working knowledge of grid-forming control (droop, VSG, virtual impedance) and how GFM current limiting differs from GFL
  • Ability to read and critically review PSCAD/EMT study reports and HIL results, and compare them with measured test data
  • Ability to produce and read SLDs and GA drawings
  • Strong waveform and data analysis skills using Python, MATLAB, or similar
  • Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods (preferred)
  • AutoCAD and protection settings coordination (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
US-based roles: medical insurance, Mexico-based roles: major medical expenses insurance
Dental & vision
US-based roles: dental and vision insurance
Retirement plan
US-based roles: 401(k) with company match
Paid time off
US-based roles: paid time off and company holidays, Mexico-based roles: paid time off and holidays per local policy
Bonus
US-based roles: annual performance-based bonus eligibility, Mexico-based roles: annual performance bonus eligibility
Learning & tuition
Professional development and growth opportunities
Life & disability insurance
Mexico-based roles: life insurance
Other
Mexico-based roles: Christmas Bonus (Aguinaldo) of 30 days

Full job description

From ON.energy’s careers site

ON.energy is setting the standard for large load interconnection. ON’s patented AI UPS™ is a medium-voltage UPS that serves as a firewall, protecting the data center from the grid, and the grid from the data center. With multiple gigawatts currently under construction, we are enabling grid-safe data centers.

We are hiring a Power Electronics Engineer to own the power conversion system (PCS) in our product, both how it is designed and how it behaves. This is a product-focused role. You will lead PCS product design and documentation, tune inverter controls, lead lab and field testing, and prove ride-through and fault compliance in GFL and GFM modes.

Show full descriptionShow less

You will work closely with our PCS suppliers' controls teams and with our business development, project, commissioning and O&M engineering teams. You will report to the Senior Power Electronics Manager.

What You Will Do

Controls, testing and grid compliance

  • Own inverter control settings. Define, tune and maintain the control and protection parameters for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop and virtual impedance, current limiting and overload, and ride-through curves. Maintain a controlled settings baseline per project and per firmware release.
  • Lead system testing. Plan and run grid-integration test campaigns at national-lab and third-party facilities, as well as factory (FAT) and site tests. Write test procedures, analyze waveforms and issue reports.
  • Prove grid-code compliance. Demonstrate that the system meets LVRT/HVRT, frequency ride-through, phase-jump, fault-current and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741 and ERCOT rules, for both the grid-side GFL converter and the load-side GFM converter.
  • Analyze fault and weak-grid behavior. Study 3-phase and unbalanced faults, low-SCR operation, paralleled-converter interaction and circulating currents. Recommend control or setting changes and verify them in test.
  • Support simulation and HIL studies. Work with our modeling team (PSCAD, OPAL-RT, Typhoon HIL) to define study and HIL test cases, supply settings and test data, review reports, and confirm results match field and lab behavior.

Product and project engineering

  • Lead PCS product design. Recommend design approaches and main-equipment vendors, and participate in product design sprints with the development team.
  • Serve as technical lead with PCS suppliers. Review firmware releases and change logs, specify required behavior, and qualify new or second-source inverters against a common test set.
  • Support business development. Prepare technical proposals, including single-line diagrams (SLDs) and general arrangements (GAs) tailored to customer needs.
  • Support project execution. Compile technical information packages for project engineering, co-lead review and validation of PCS topics, and maintain technical documentation, including as-built drawings.
  • Support commissioning and O&M. Participate in commissioning, resolve field events from the waveform up, and feed design improvements back into the product.

Required Qualifications

  • Bachelor's degree in Electrical Engineering, Power Electronics Engineering or a similar field (MS or PhD a plus)
  • 8+ years of hands-on power electronics engineering in project-based or industrial settings
  • Proven system-level design experience on MW-scale power electronics equipment
  • Understanding of how BESS integrates with power electronics equipment
  • Hands-on control design or tuning of three-phase grid-connected inverters: dq current control, PLL and synchronization, and DC-link control
  • Working knowledge of grid-forming control (droop, VSG, virtual impedance) and how GFM current limiting differs from GFL
  • Direct experience with ride-through and fault behavior of inverter-based resources (LVRT/HVRT, reactive current injection, negative-sequence response) and the grid codes that govern them
  • Ability to read and critically review PSCAD/EMT study reports and HIL (OPAL-RT, Typhoon) results, and compare them with measured test data
  • Experience planning and running tests on MW-scale inverters or BESS: lab, FAT or site commissioning
  • Ability to produce and read SLDs and GA drawings
  • Strong waveform and data analysis skills using Python, MATLAB or similar
  • Excellent communication across technical and non-technical teams, with clear technical writing for test procedures, reports and settings rationale

Preferred Qualifications

  • Experience with BESS, UPS / mission-critical or utility-scale infrastructure projects, including IEC 62040-3 performance classes
  • Paralleled converters on common AC and DC buses: load sharing, zero-sequence and circulating-current control, interleaving
  • Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods
  • Grid-integration testing at a national lab or accredited facility
  • Hands-on use of PSCAD, MATLAB/Simulink or real-time simulation (RTDS, OPAL-RT, Typhoon HIL)
  • ERCOT interconnection experience (NOGRR 245 / 282, large-load ride-through)
  • Experience working with an inverter OEM's firmware and parameter sets as the customer, not only as the designer
  • AutoCAD and protection settings coordination

Tools and Standards You Will Work With

  • Simulation: PSCAD/EMTDC and PSS/E study reports; OPAL-RT and Typhoon HIL results
  • Test and analysis: Power analyzers, high-speed DAQ, scopes, Python/MATLAB
  • Grid codes: IEEE 2800, IEEE 1547 / UL 1741 SB, ERCOT Nodal Operating Guides, NERC reliability guidelines
  • UPS: IEC 62040-3
  • Equipment: MW-scale liquid-cooled PCS, 1.5 kV DC battery systems, MV transformers

For US-based roles - What you’ll get:

  • Competitive salary + annual performance-based bonus eligibility
  • Medical, dental, and vision insurance
  • 401(k) with company match
  • Paid time off and company holidays

For Mexico-based roles - What you’ll get:

  • Competitive salary + annual performance bonus eligibility
  • Christmas Bonus (Aguinaldo): 30 days
  • Major medical expenses and life insurance
  • Paid time off and holidays (per local policy)

For all roles:

  • Professional development and growth opportunities
  • Opportunity to grow with a mission-driven team shaping the future of clean energy
  • Benefits vary by role and location and are subject to change.

Agency Notice: ON.energy does not accept unsolicited resumes from staffing agencies, search firms, or third-party recruiters. Resumes submitted without a fully executed Master Services Agreement (MSA) and a written request from an authorized member of our Talent Acquisition team will be considered the property of ON.energy. No placement fees or compensation will be paid for unsolicited candidate submissions.

  • Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Power System Engineer

WSP · Houston, TX +6 places

$90k–$157k/yrHybrid

StrongChecked open todayPosted 19 days ago

POWER DESIGN ENGINEER

Foxconn Industrial Internet - FII · Houston, TX

Full-time

StrongPay not listedChecked open todayPosted 21 days ago

Electrical Engineer IV

IntelliPro Group Inc. (agency) · Houston, TX

$65–$70/hrContract

StrongChecked open todayPosted 22 days ago

Electrical Engineer (HH)

Foxconn Industrial Internet - FII · Houston, TX

Full-timeOn-site

StrongPay not listedChecked open todayPosted 21 days ago

See more like this