Engineering jobs

Optical Networking Engineer

Mesh Optical TechnologiesGardena, CA +1 placeOn-site

$110k–$160k/yr listed by the employer

Key facts

Where
Gardena, CA · Los Angeles, CA · on-site
Experience
2+ years
Degree
Bachelor's degree

Looks real. 1 thing to check before you apply.

On Mesh Optical Technologies’ own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 9 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Evaluate network architectures, interconnect topologies, and switch, router, and NIC hardware to guide design choices.
  • Design end-to-end optical interconnects and model link performance against reach, bandwidth, latency, and signal-performance targets.
  • Plan and conduct characterization, interoperability, qualification, bring-up, and acceptance testing in the lab and at customer sites.
  • Troubleshoot optical, electrical, firmware, software, and link-level issues; develop tools and scripts to accelerate diagnosis.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 2+ years of experience in optical networking, network or interconnect design, system integration, test, or a closely related hands-on role
  • Ability to develop clear, repeatable technical documentation that enables deployment at scale
  • Experience designing data center or HPC network fabrics, including topology trade studies and fabric scaling analysis (preferred)
  • Experience conducting hardware trade studies across switch, router, NIC, and optical platforms (preferred)
  • Experience with link-budget modeling, channel modeling, or optical/RF simulation tools (preferred)
  • Experience designing or characterizing optical transceivers, optical engines, or optical interconnects (preferred)
  • Experience with CMIS implementation, module firmware development or debug, and DDM/DOM diagnostic monitoring (preferred)
  • Experience validating optical transceiver interoperability across switch, NIC, and host platforms from major vendors (preferred)
  • Experience with embedded systems debugging, including firmware flashing and JTAG, UART, I2C, and SPI serial troubleshooting (preferred)
  • Experience with optical test equipment and methods, including tunable lasers, optical spectrum analyzers, receiver sensitivity testing, and OTDRs for fiber plant characterization (preferred)
  • Experience with Linux system administration, command-line troubleshooting, and network configuration and diagnostics (preferred)
  • Experience in a field engineering, field applications, or customer-facing technical role supporting optical networking hardware (preferred)

Education

  • Bachelor's or Master's degree in electrical engineering, optical engineering, photonics, computer engineering, computer science, or a related discipline

Skills

  • Working knowledge of network architectures and high-speed interconnect fabrics, including topology trade-offs and scaling considerations across Ethernet, InfiniBand, and other high-speed protocols
  • Working knowledge of optical networking and link design fundamentals, including transceiver operation, link budgets, NRZ and PAM4, BER, OSNR, OMA, and receiver sensitivity
  • Familiarity with switches, routers, and NICs, and how radix, port speed, and fabric design affect interconnect choices
  • Familiarity with optical module management interfaces and standards, including CMIS and associated diagnostic and configuration workflows
  • Software and scripting proficiency to model link performance, write diagnostic tools, parse logs, automate test sequences, and interface with hardware
  • Lab and debugging skills, including use of oscilloscopes, optical power meters, BERTs, and optical spectrum analyzers, and tracing issues across optical, electrical, and firmware boundaries
  • Familiarity with PAM4 DSP, FEC, and high-data-rate signal-integrity considerations (preferred)
  • Deep familiarity with pluggable optical module standards and form factors (preferred)
  • Familiarity with data center network topologies, fabric architectures, and high-radix switch deployments (preferred)
  • Familiarity with IEEE 802.3, OIF CEI, and CAUI standards (preferred)

Other requirements

  • Willingness to travel for deployments and field trials (estimated 25%), with occasional extended hours as deployments require

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive medical insurance, with significant cost covered by the company for you and your dependents
Dental & vision
Comprehensive dental and vision insurance, with significant cost covered by the company for you and your dependents
Retirement plan
Access to a 401(k) retirement plan
Paid time off
Flexible PTO; 3 weeks accrued vacation and 10 company holidays per year
Parental leave
Paid parental leave
Equity
Eligibility for long-term incentives including company stock options
Bonus
Discretionary bonuses awarded for exceptional achievements
Relocation help
Relocation assistance to Los Angeles

Full job description

From Mesh Optical Technologies’ careers site

Location: Gardena, CA

Mesh Optical Technologies was founded on the belief that optical photons will be at the center of advanced technologies in the coming century. Making advanced technology ubiquitous means building at scale, and that's exactly what we're doing at Mesh.

Show full descriptionShow less

We're seeking an Optical Networking Engineer to lead the network-level design of our optical interconnect solutions — trading network architectures, evaluating routing and switching hardware, and engineering signal performance across customer fabrics, then carrying those designs through validation and deployment. This is a role for an engineer who can reason from the topology down to the link, weigh hardware trade-offs across switch, NIC, and optical platforms, and translate a design into the documentation that makes it deployable at scale.

Responsibilities

  • Trade and evaluate network architectures and interconnect topologies to guide how Mesh optical hardware is designed into and optimized across customer networks
  • Design end-to-end optical interconnect solutions at the network level, specifying transceivers, fiber plant, cabling, and link configurations to meet reach, bandwidth, latency, and performance targets
  • Conduct routing and switching hardware trade studies, evaluating switch, router, and NIC platforms across radix, port speed, and fabric scaling to inform interconnect design decisions
  • Own network-level signal and optical performance, including link budgets, modulation-format trade-offs (NRZ, PAM4), BER/OSNR/OMA, receiver sensitivity, and FEC margin across the deployed link
  • Model and analyze link and channel performance to predict behavior across topologies and operating conditions, and use those results to drive design and deployment choices
  • Develop comprehensive deployment documentation — interconnect design guides, commissioning checklists, integration and application notes, and field service procedures that enable repeatable, high-quality deployments as the customer base scales
  • Define and execute characterization, interoperability, and qualification test plans validating optical link performance within Ethernet, InfiniBand, and other high-speed interconnect architectures, including switch and NIC platforms from major vendors
  • Lead bring-up, link validation, and acceptance testing of Mesh optical hardware in the lab and on-site within customer network environments
  • Diagnose and resolve hardware, firmware, software, and link-level issues across optical, electrical, and firmware boundaries, including optical power and signal-quality troubleshooting, module register debug, host interface bring-up, and system-level fault isolation
  • Support module management interface bring-up and debug, including CMIS configuration, diagnostics page interpretation, and firmware update workflows
  • Support pre-deployment site readiness assessments, including review of customer network topology, infrastructure requirements, and interface specifications
  • Capture field issues, failure modes, and customer feedback with sufficient technical detail to enable root-cause investigation, and feed lessons learned back into design and process improvements
  • Develop diagnostic tools, scripts, and utilities that accelerate troubleshooting and reduce time-to-resolution
  • Collaborate with optical, electrical, firmware, and manufacturing teams to drive resolution of field-discovered issues and feed learnings into product and process improvements
  • Support product qualification, early field trials, and interoperability testing for new products

Qualifications

  • Bachelor's or Master's degree in electrical engineering, optical engineering, photonics, computer engineering, computer science, or a related discipline
  • 2+ years of experience in optical networking, network or interconnect design, system integration, test, or a closely related hands-on role
  • Working knowledge of network architectures and high-speed interconnect fabrics, including topology trade-offs and scaling considerations across Ethernet, InfiniBand, and other high-speed protocols
  • Working knowledge of optical networking and link design fundamentals, including transceiver operation, link budgets, modulation formats (NRZ, PAM4), and common optical performance metrics (BER, OSNR, OMA, receiver sensitivity)
  • Familiarity with routing and switching hardware — switches, routers, and NICs — and how radix, port speed, and fabric design affect interconnect choices
  • Familiarity with optical module management interfaces and standards, including CMIS and associated diagnostic and configuration workflows
  • Software and scripting proficiency sufficient to model link performance, write diagnostic tools, parse logs, automate test sequences, and interface with hardware
  • Strong lab and debugging skills, including comfort with instrumentation (oscilloscopes, optical power meters, BERTs, optical spectrum analyzers) and the ability to trace issues across optical, electrical, and firmware boundaries
  • Ability to develop clear, repeatable technical documentation that enables deployment at scale
  • Demonstrated ability to work independently in unstructured environments, triage problems under time pressure, and drive issues to resolution with limited resources
  • Strong written and verbal communication skills, including the ability to document technical issues clearly and communicate effectively with both engineering peers and customer network operations teams
  • Willingness to travel for deployments and field trials (estimated 25%), with occasional extended hours as deployments require

Preferred Experience

  • Experience designing data center or HPC network fabrics, including topology trade studies and fabric scaling analysis
  • Experience conducting hardware trade studies across switch, router, NIC, and optical platforms
  • Experience with link-budget modeling, channel modeling, or optical/RF simulation tools
  • Familiarity with PAM4 DSP, FEC, and signal-integrity considerations at high data rates
  • Experience designing or characterizing optical transceivers, optical engines, or optical interconnects
  • Deep familiarity with pluggable optical module standards and form factors
  • Experience with CMIS implementation, module firmware development or debug, and diagnostic monitoring (DDM/DOM)
  • Experience validating optical transceiver interoperability across switch, NIC, and host platforms from major vendors
  • Familiarity with data center network topologies, fabric architectures, and high-radix switch deployments
  • Experience with embedded systems debug, including firmware flashing and serial console troubleshooting (JTAG, UART, I2C, SPI)
  • Experience with optical test equipment and methods, including tunable lasers, optical spectrum analyzers, receiver sensitivity testing, and OTDRs for fiber plant characterization
  • Familiarity with relevant IEEE and OIF standards (e.g., 802.3, OIF CEI, CAUI)
  • Experience with Linux system administration, command-line troubleshooting, and network configuration and diagnostics
  • Experience in a field engineering, field applications, or customer-facing technical role supporting optical networking hardware

Compensation and Benefits

Pay range — Optical Networking Engineer: $110,000.00 – $160,000.00 per year

Title and base salary are determined on a case-by-case basis commensurate with experience and merit.

In addition to base salary, compensation for this role includes:

  • Eligibility for long-term incentives including company stock options and discretionary bonuses awarded for exceptional achievements
  • Comprehensive medical, vision, and dental insurance with significant cost covered by the company for yourself and dependents
  • Paid parental leave and flexible PTO (3 weeks accrued vacation and 10 company holidays per year)
  • 401(k) retirement plan access
  • Relocation assistance to sunny Los Angeles

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Senior Optical Engineer

LLNL · Livermore, CA

$176k–$267k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

Systems Engineer, EW

Anduril · Costa Mesa, CA

$147k–$196k/yrFull-time

StrongChecked open todayPosted yesterday

See more like this