Manufacturing & Production jobs

Senior Quality Engineer (Electronics)

Neros TechnologiesTorrance, CAOn-sitePosted 1 month ago

$162k–$226k/yr listed by the employer

Key facts

Experience
5+ years
Degree
Bachelor's degree

This job is closed.

The employer took it down 19 days ago, after 1 day open. Here are similar open jobs.

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Note: Last seen open 20 days agoLive check
  • Trust score 100 / 100 · Strong
Posting history
  1. Posted Nov 1, 2026 · taken down Nov 3, 2026
  2. Reposted #1 Nov 3, 2026
See all 5 checksShow fewer
How we check

Similar jobs

QA Engineer

ICHOR · Livermore, CA

$82k–$139k/yrOn-site

StrongChecked open todayPosted 3 days ago

See more like this

What you’ll do

  • Own electronics workmanship and acceptance quality across PCBAs, soldering, harnesses, cables, and battery packs.
  • Respond to production-line quality issues, contain suspect product, lead MRB and root-cause investigations, and verify corrective actions.
  • Define electronics quality metrics and SPC strategy, and work with software teams on production dashboards and tools.
  • Set electronics inspection and test strategy, and drive design for quality during new product introductions and design changes.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years in a quality, manufacturing, reliability, or electrical design engineering role supporting electronics production
  • Experience with SMT processes and inspection (solder paste, reflow, AOI, X-ray, ICT or flying probe) and common defect modes
  • Experience with secondary and post-SMT processes, such as through-hole soldering, component preparation (lead forming, tinning, de-golding), and conformal coating, and common defect modes
  • Track record leading production-line root cause and corrective action (RCCA) to closure using structured problem solving (8D, 5 Whys, fishbone), PFMEA, control plans, FAI (AS9102 or similar), and SPC
  • Experience supporting high-volume electronics production, ideally during a production ramp (preferred)
  • Experience with ISO 9001 or AS9100 quality systems in defense or aerospace (preferred)
  • Familiarity with lithium-ion cells and battery pack quality requirements, including cell matching, weld inspection, and BMS verification (preferred)
  • Familiarity with drones, RC aircraft, or FPV hardware (preferred)

Education

  • Bachelor’s degree in electrical engineering, mechanical engineering, or physics

Skills

  • Proficiency in SQL and Python, including building queries, dashboards, or tools for tracking production quality
  • Strong working knowledge of IPC-A-610, J-STD-001, and IPC/WHMA-A-620 (preferred)
  • Knowledge of ESD control programs (ANSI/ESD S20.20) (preferred)
  • Comfort with oscilloscopes, multimeters, power supplies, and basic RF test equipment (preferred)

Benefits

Equity
Highly competitive equity grants are considered part of the total compensation package.

Full job description

From Neros Technologies’ careers site

Who we are

Neros is a defense technology company rebuilding America’s drone industrial base. We design and manufacture high-performance unmanned systems that are tested in combat, iterated at startup speed, and built at massive scale. Our team culture is fast, hands-on, and obsessed with closing the gap between design and deployment.

As drones transform the character of warfare, Neros is delivering the systems the West needs to compete on the modern battlefield and deter the adversaries of democracy.

What you will be doing

Show full descriptionShow less

As a Senior Quality Engineer at Neros, you'll own electronics build quality across the factory as we scale production, from PCBAs and harnesses to battery packs. You'll be the technical authority on electronics quality, leading the response when issues show up on the line and working with manufacturing and engineering to contain them, find the root cause, and make sure every unit survives and performs in contested environments.

We're looking for an experienced, hands-on engineer with deep electronics hardware manufacturing experience, a proactive, ownership-driven approach to solving problems, and a proven ability to lead in fast-moving production environments.

Responsibilities

  • Own electronics quality across the factory as the technical authority on workmanship and acceptance, from PCBA and soldering to harnesses, cables, and battery packs
  • Act as first responder for quality issues on the line: disposition defects, contain suspect product, and drive electronics nonconformances through MRB to closure
  • Lead MRB for electronics nonconformances and lead containment on high-impact escapes
  • Lead root cause investigations on electronics defects in partnership with engineering, and verify that fixes hold on the line
  • Define the electronics quality metrics and SPC strategy, and work with software teams to build them into production systems and dashboards
  • Run build quality reviews with production and engineering leadership, setting priorities based on risk and impact
  • Set the inspection and test strategy for electronics: where to inspect, sample, or error-proof, and when to remove inspection as processes prove capable
  • Drive design for quality (DFQ) during new product introduction and design changes so line data and lessons learned shape new boards and assemblies before they reach production
  • Own the factory ESD control plan and IPC certification program, including audits and compliance
  • Mentor quality engineers and technicians, and help build the quality team as production scales

You should have the following

  • Bachelor’s degree in electrical engineering, mechanical engineering, or physics
  • 5+ years in a quality, manufacturing, reliability, or electrical design engineering role supporting electronics production
  • Experience with SMT processes and inspection (solder paste, reflow, AOI, X-ray, ICT or flying probe) and their common defect modes
  • Experience with secondary and post-SMT processes, such as through-hole soldering, component preparation (lead forming, tinning, de-golding), and conformal coating, and their common defect modes
  • Track record leading root cause and corrective action (RCCA) to closure on production lines, using structured problem solving (8D, 5 Whys, fishbone), PFMEA, control plans, FAI (AS9102 or similar), and SPC
  • Proficiency in SQL and Python, including building queries, dashboards, or tools that others use to track production quality

Nice to have

  • Experience supporting high-volume electronics production, ideally during a production ramp; experience with ISO 9001 or AS9100 quality systems in defense or aerospace
  • Working knowledge of RCCA and structured problem solving (8D, 5 Whys, fishbone), PFMEA, control plans, FAI (AS9102 or similar), and SPC
  • Strong working knowledge of IPC-A-610, J-STD-001, and IPC/WHMA-A-620; knowledge of ESD control programs (ANSI/ESD S20.20)
  • Familiarity with lithium-ion cells and battery pack quality requirements, including cell matching, weld inspection, and BMS verification; comfort with oscilloscopes, multimeters, power supplies, and basic RF test equipment
  • Familiarity with drones, RC aircraft, or FPV hardware. If you’ve soldered your own ESCs and debugged your own video feed, we want to hear about it

US Salary Range

$161,500 - $226,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Neros' total compensation package.

We’re an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Something wrong with this job? Report it