Manufacturing & Process Engineer jobs

Senior Manufacturing Engineer (QS)

InfleqtionLouisville, COFull-timeOn-sitePosted 4 days ago

Pay not listed

Key facts

Experience
4+ years
Degree
Bachelor's degree or equivalent
US visa
No US visa sponsorship

This job is closed.

The employer took it down today, after 3 days open. Here are similar open jobs.

  • To check: No pay range listed, though one is likely required in COAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteWorkable board
  • Note: Last seen open yesterdayLive check
  • Trust score 89 / 100 · Looks good
See all 4 checksShow fewer
How we check

Similar open jobs

Manufacturing Engineer

Voyager Technologies, Inc. · Pueblo, CO

$90k–$115k/yrOn-site

StrongOpen 2 monthsChecked open todayPosted 2 months ago

Manufacturing Engineer III

ALTEN Technology USA · Mukilteo, WA +1 place

$120k–$150k/yrHybrid

StrongOpen 3 monthsChecked open todayPosted 3 months ago

See more like this

What you’ll do

  • Plan and coordinate QRF hardware manufacturing and assembly from prototype builds through repeatable production.
  • Translate released engineering documents into build plans, work orders, travelers, instructions, and traceable manufacturing records.
  • Coordinate materials, suppliers, technicians, engineering, quality, and test; support hands-on assembly and troubleshooting as needed.
  • Control configurations and nonconformances, track build status and issues, and ensure hardware is documented and ready for test handoff.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 4+ years of relevant manufacturing, production, process, or new-product-introduction engineering experience with complex hardware
  • Experience creating and maintaining manufacturing travelers, work instructions, work orders, routers, assembly procedures, and as-built records
  • Hands-on experience assembling or troubleshooting precision electromechanical, electro-optical, vacuum, electronic, or similarly complex hardware
  • Experience coordinating with supply chain and suppliers on material readiness, incoming inspection, fabrication issues, and build constraints
  • Experience using ERP or MRP, product lifecycle management, manufacturing execution, or equivalent controlled documentation systems
  • 6+ years of experience in manufacturing engineering, production engineering, process engineering, or new-product introduction for complex or high-reliability hardware (preferred)
  • Experience moving scientific instruments, aerospace or defense hardware, photonics, semiconductor equipment, medical devices, or other precision systems from prototype builds toward repeatableedible (preferred)
  • Experience with optical assemblies, laser systems, ultra-high-vacuum hardware, high-voltage equipment, embedded electronics, precision mechanical assemblies, or atomic and quantum technologies (preferred)
  • Experience with AS9100, ISO 9001, first-article inspection, corrective and preventive action, process failure mode and effects analysis, or related quality-system practices (preferred)
  • Experience developing manufacturing cells, facility layouts, tooling, fixtures, ground-support equipment, and controlled storage or material-flow areas (preferred)
  • Experience supporting supplier development, source inspection, fabrication readiness, or acceptance of externally manufactured components (preferred)
  • Experience training or mentoring technicians and improving work instructions based on direct build-floor feedback (preferred)

Education

  • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field, or equivalent practical experience

Skills

  • Ability to read and interpret mechanical drawings, geometric dimensioning and tolerancing, bills of material, electrical schematics, specifications, and engineering change documentation
  • Working knowledge of configuration control, nonconformance management, material review, deviation and waiver control, rework documentation, and hardware traceability

Other requirements

  • Ability to communicate build status, technical issues, documentation requirements, and recovery actions clearly to technicians, engineers, quality personnel, and program leadership
  • Permanent US resident
  • Must be authorized to receive export-controlled software, hardware, or technology without sponsorship for an export license, if access is required for the position

Benefits

Health insurance
Comprehensive medical coverage, including full-spectrum fertility support for growing families; employer-funded Health Savings Account, Flexible Savings Account
Dental & vision
Comprehensive dental and vision coverage
Retirement plan
401(k) match
Paid time off
Unlimited PTO
Parental leave
Paid FMLA and maternity/paternity leave
Equity
Equity Program
Learning & tuition
Student Loan Repayment
Wellness & mental health
Employee Assistance Program
Life & disability insurance
Company-paid Life and AD&D Insurance

Full job description

From Infleqtion’s careers site

Infleqtion is a global quantum technology company solving the world’s most challenging problems. The company harnesses quantum mechanics to build and integrate quantum computers, sensors, and networks. From fundamental physics to leading-edge commercial products, Infleqtion enables quantum technologies through an ecosystem of devices and platforms.

Position Summary

Show full descriptionShow less

We are seeking a Senior Manufacturing Engineer to support the transition of prototype QRF hardware into controlled, repeatable builds. This individual will connect design engineering, supply chain, technicians, quality, and test by translating released CAD, drawings, bills of material, and specifications into build plans, work orders, travelers, assembly instructions, and traceable as-built records. This person may perform hands-on assembly and troubleshooting when needed, but the primary focus is establishing the processes, documentation, issue controls, facilities, and infrastructure required to build hardware consistently and efficiently.

Job Responsibilities

The duties and responsibilities outlined below include essential functions of the role. Depending on business needs, this role may perform a combination of some or all of the following duties. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

  • Plan and coordinate the manufacture and assembly of QRF systems, subsystems, and precision hardware from early prototype builds through repeatable production configurations.
  • Translate released CAD models, engineering drawings, bills of material, specifications, and design notes into manufacturing plans, work orders, travelers, routers, visual work instructions, and assembly records.
  • Coordinate with supply chain, procurement, engineering, and quality to confirm material availability, make-or-buy decisions, supplier readiness, incoming inspection needs, kitting, and build sequencing.
  • Perform or support hands-on mechanical, electrical, optical, and vacuum-hardware assembly when needed to validate build methods, resolve issues, or supplement technician capacity.
  • Develop clear instructions for technicians, provide build-floor support, and incorporate technician feedback into controlled work instructions and process improvements.
  • Establish and maintain serialization, lot traceability, as-built bills of material, configuration records, torque and inspection records, redlines, photographs, and other manufacturing evidence required for hardware acceptance.
  • Identify, segregate, and quarantine discrepant material or assemblies; document nonconformances; and coordinate engineering and quality review, disposition, rework, and closure before hardware proceeds to test.
  • Maintain configuration control throughout the build process and ensure approved drawing changes, deviations, waivers, and rework instructions are reflected in the manufacturing record.
  • Track work in progress, material shortages, open manufacturing issues, schedule impacts, and closure actions, and communicate build status clearly to engineering and program teams.
  • Coordinate with the test team to define manufacturing-complete and handoff criteria, confirm required inspections and records are complete, and transfer hardware in a known and documented configuration.
  • Support design-for-manufacture and design-for-assembly reviews by identifying build complexity, tolerance, tooling, inspection, supplier, and repeatability concerns before drawings are released.
  • Define and implement manufacturing fixtures, tooling, equipment, work areas, material-flow controls, and facility improvements needed to support increasing build volume and multiple concurrent program commitments.
  • Support root-cause investigations, corrective actions, process qualification, yield improvement, and lessons learned for assembly-related issues.
  • Ensure manufacturing activities comply with applicable safety, cleanliness, ESD, laser, high-voltage, vacuum,

Requirements

  • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field, or equivalent practical experience.
  • 4+ years of relevant manufacturing, production, process, or new-product-introduction engineering experience with complex hardware.
  • Experience creating and maintaining manufacturing travelers, work instructions, work orders, routers, assembly procedures, and as-built records.
  • Ability to read and interpret mechanical drawings, geometric dimensioning and tolerancing, bills of material, electrical schematics, specifications, and engineering change documentation.
  • Hands-on experience assembling or troubleshooting precision electromechanical, electro-optical, vacuum, electronic, or similarly complex hardware.
  • Working knowledge of configuration control, nonconformance management, material review, deviation and waiver control, rework documentation, and hardware traceability.
  • Experience coordinating with supply chain and suppliers on material readiness, incoming inspection, fabrication issues, and build constraints.
  • Experience using ERP or MRP, product lifecycle management, manufacturing execution, or equivalent controlled documentation systems.
  • Strong organizational and problem-solving skills, with the ability to manage multiple builds, priorities, and open issues in a development environment.
  • Ability to communicate build status, technical issues, documentation requirements, and recovery actions clearly to technicians, engineers, quality personnel, and program leadership.
  • Permanent US resident

This position may require access to information protected under U.S. export control laws and regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR). Any offer of employment may be conditioned on authorization to receive software, hardware, or technology controlled under these laws without sponsorship for an export license.

Preferred Experience

  • 6+ years of experience in manufacturing engineering, production engineering, process engineering, or new-product introduction for complex or high-reliability hardware.
  • Experience moving scientific instruments, aerospace or defense hardware, photonics, semiconductor equipment, medical devices, or other precision systems from prototype builds toward repeatable production.
  • Experience with optical assemblies, laser systems, ultra-high-vacuum hardware, high-voltage equipment, embedded electronics, precision mechanical assemblies, or atomic and quantum technologies.
  • Experience with AS9100, ISO 9001, first-article inspection, corrective and preventive action, process failure mode and effects analysis, or related quality-system practices.
  • Experience developing manufacturing cells, facility layouts, tooling, fixtures, ground-support equipment, and controlled storage or material-flow areas.
  • Experience supporting supplier development, source inspection, fabrication readiness, or acceptance of externally manufactured components.
  • Experience training or mentoring technicians and improving work instructions based on direct build-floor feedback.

Benefits

  • Salary Range: per year 131000-180000
  • Comprehensive medical, dental, and vision coverage, including full-spectrum fertility support for growing families.
  • Employer-funded Health Savings Account
  • Unlimited PTO
  • 401(k) match
  • Company-paid Life and AD&D Insurance
  • Flexible Savings Account
  • Paid FMLA, Maternity/Paternity Leave
  • Employee Assistance Program
  • Student Loan Repayment
  • Equity Program

Notice to Recruitment Agencies:

Infleqtion does not accept unsolicited resumes from agencies. Infleqtion is not responsible for any fees related to unsolicited resumes.

Something wrong with this job? Report it · This flag looks wrong