Engineering jobs

Staff Hardware Systems Engineer

Gather AIPittsburgh, PAOn-sitePosted 21 days ago

Pay not listed

Looks real. 1 thing to check before you apply.

On Gather AI’s own careers site (Greenhouse), checked open today.

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Own requirements and V&V for warehouse robotics hardware, from system requirements through subsystem and interface requirements with traceable verification evidence.
  • Evaluate candidate technologies, build and run tests, analyze results, and recommend technologies for products.
  • Integrate electrical hardware with firmware, software, and autonomy; conduct bring-up, integration testing, and interface failure investigations.
  • Lead environmental and compliance testing, technical budgets, hazard analysis, and DFMEA.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Owned requirements through V&V on an electromechanical product taken from concept to production, including subsystem-level decomposition, traceability, and V&V plans with objective, measurable accept­
  • Integrated hardware with firmware and software in a robotic, embedded, autonomous, or complex electromechanical system, including bring-up and root-causing interface failures
  • Build test methods, rigs, fixtures, and data acquisition; experience with measurement system analysis such as Gauge R&R
  • Environmental and compliance qualification with external labs, including shock and vibration, thermal cycling and condensation, IP ingress, and EMC/FCC (preferred)
  • Regulated product development in medical, aerospace, or automotive (preferred)
  • Experience with drones/UAVs, material handling equipment, or robotics (preferred)

Education

  • BS in an engineering field with 10+ years of relevant experience, or MS with 8+ years of relevant experience
  • MS in an engineering field (preferred)

Skills

  • Camera characterization, illumination, lithium batteries, charging systems, and related technology trade studies (preferred)

Other requirements

  • Work on-site in Pittsburgh 4–5 days a week and travel about 10%

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Gather AI’s careers site

About Gather AI

Are you ready to build the future of supply chain? At Gather AI, we're not just creating software; we're pioneering a new era of warehouse intelligence. We've developed a groundbreaking, vision-powered platform that uses autonomous drones and existing equipment to capture real-time data, completely digitizing workflows that have historically been manual and error-prone. This means facilities operate smarter, safer, and more efficiently, ultimately redefining "on-time, in full" delivery.

Show full descriptionShow less

If you're looking for an opportunity to contribute to truly transformative technology and make a significant impact in a vital industry, Gather AI is the place for you. We're leading the charge in the rapidly evolving robotics industry, and we invite you to join us in reshaping the global supply chain, one intelligent warehouse at a time.

About the role

We're hiring a Staff Hardware Systems Engineer to own requirements, integration and verification and validation (V&V) for our warehouse robotics hardware: autonomous inventory drones, forklift-mounted vision systems, and the charging and battery systems that support them. You'll make sure every Gather hardware product is built from testable requirements, de-risked one technology block at a time, integrated cleanly with firmware, software and autonomy, and released on objective evidence that holds up in real warehouses.

This is a hands-on individual-contributor role on a small, senior hardware team in Pittsburgh. You'll set up the framework and do the work yourself: scout and test new technologies, write the requirements, build the test rigs, run the tests and analyze the data.

What you'll do

  • Own the requirements and V&V framework for our hardware products, from system requirements down to subsystem, technology-block and interface requirements, with traceability to verification evidence.
  • Scout, characterize and compare candidate technologies (cameras, illumination, propulsion, wireless charging, batteries and more), and recommend which to take into the next product.
  • Own integration of electrical, firmware, software and autonomy into the hardware product design, including bring-up, integration testing and root cause of interface failures.
  • Write and run V&V plans: test methods, rigs, fixtures and instrumentation; statistically based sampling plans; design of experiments; clear conclusions with stated uncertainty.
  • Own environmental and compliance testing (shock and vibration, thermal and condensation, ingress, EMC/FCC), working with external test labs.
  • Own technical budgets (power, thermal, mass, EMC/RF), lead system-level hazard analysis, and feed DFMEA.
  • Deliver decision-ready evidence for design reviews, design freeze and release, and assess the verification impact of engineering changes.
  • Close the loop from field failures back to requirements and tests, and shape production test strategy with our contract manufacturer.

What success looks like

  • 30 days: Own verification for our next-generation forklift vision system and break its system requirements down to hardware level.
  • 60 days: Define requirements and the V&V plan for a new charging system, and get the requirements cascade and verification matrix in use on a live product line.
  • 90 days: Requirements cascade and verification matrix in use across active product lines; test plans for current technology blocks; a reusable library of environmental test profiles.
  • 1 year: V&V evidence built into every hardware stage gate, next-generation products released against that standard, and a production test coverage proposal handed to manufacturing.

What you bring

  • You've owned requirements through V&V on an electromechanical product taken from concept to production: decomposing product requirements to subsystem level with traceability, and writing and running V&V plans with objective, measurable acceptance criteria.
  • You've integrated hardware with firmware and software in a robotic, embedded, autonomous or complex electromechanical system, including bring-up and root-causing interface failures.
  • You use statistics to make engineering decisions: design of experiments, data analysis and statistically based sampling plans (confidence/reliability, AQL or similar).
  • You build the test, not just the plan: test methods, rigs, fixtures and data acquisition, including measurement system analysis (e.g., Gauge R&R).
  • BS in an engineering field with 10+ years of relevant experience, or an MS (preferred) with 8+ years.

Nice to have

  • Environmental and compliance qualification with external labs: shock and vibration, thermal cycling and condensation, IP ingress, EMC/FCC.
  • Vision and power technology: camera characterization and illumination, lithium batteries and charging systems, and trade studies to choose between them.
  • Regulated product development (medical, aerospace, automotive), with the judgment to scale that rigor to a startup.
  • Experience with drones/UAVs, material handling equipment or robotics.

Location

Pittsburgh, PA. On-site 4–5 days a week (this is a lab-heavy, hands-on role), with about 10% travel to test labs, our contract manufacturer and customer warehouses.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Equipment Engineer IV

FirstEnergy · Towanda, PA +2 places

$108k–$131k/yrOn-site

StrongChecked open todayPosted 5 days ago

Senior Engineer

Motional · Pittsburgh, PA

$121k–$170k/yr

StrongChecked open todayPosted 9 days ago

Controls Engineer

Associated Metal Forming Technologies · Corry, PA

$100k–$110k/yrFull-timeOn-site

StrongChecked open todayPosted 20 days ago

See more like this