California jobs

Equipment Engineer

NeuralinkFremont, CAFull-timeOn-sitePosted 4 days ago

$77k–$129k/yr listed by the employer

Key facts

Experience
3+ years
Degree
Bachelor's degree or equivalent

Looks real and checked open today.

On Neuralink’s own careers site (Greenhouse).

Trust score ready Nov 25

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 25
See all 4 checksShow fewer
How we check

What you’ll do

  • Maintain, troubleshoot, repair, and qualify cleanroom microfabrication equipment to support uptime and production.
  • Develop preventive maintenance protocols and equipment qualification plans; lead equipment installation, integration, release, relocation, and deinstallation.
  • Monitor equipment performance metrics and SPC data; manage spare parts, consumables, and vendor service agreements.
  • Work with process engineering to address yield issues, match tools, and implement hardware upgrades.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3+ years of direct experience in cleanroom equipment maintenance or engineering for semiconductor, MEMS, or thin-film fabrication tools
  • Experience executing root-cause failure analysis and implementing permanent corrective actions to minimize tool downtime
  • Experience drafting, executing, and standardizing preventive maintenance procedures alongside hardware qualification plans
  • Hands-on experience with photolithography aligners or steppers, PVD/e-beam evaporators, PECVD/ALD systems, ICP/RIE plasma etchers, polyimide coaters or ovens, electroplating equipment, or KLA/SEM-ins­ (preferred)
  • Experience in regulated medical device manufacturing under ISO 13485 or FDA 21 CFR Part 820, including equipment validation, calibration protocols, and formal change control (preferred)
  • Experience participating in cleanroom ramp-up or transitioning process technologies from early R&D into high-volume production (preferred)
  • Experience with MES platforms, CMMS software, and statistical process control (SPC) (preferred)
  • Experience processing thin-film flexible polymer substrates or MEMS-based neural interfaces (preferred)
  • Experience managing vendor service contracts, leading major equipment retrofits, and refurbishing legacy fab infrastructure (preferred)

Education

  • Bachelor’s degree in mechanical engineering, electrical engineering, materials science, chemical engineering, physics, or a related field, or equivalent practical experience

Skills

  • Troubleshooting vacuum subsystems, RF/plasma generators, automated robotics, and electrical controls using wiring schematics, multimeters, and safety interlocks
  • Familiarity with cleanroom safety protocols, Lockout/Tagout (LOTO), high-voltage safety, and hazardous chemical or toxic gas handling
  • Proficiency with Python or SQL for equipment performance monitoring, tool sensor analysis, or automated preventive maintenance scheduling (preferred)

On the job

  • Physically present at the Fremont cleanroom and able to adhere to cleanroom gowning protocols for extended durations
  • Capability to lift approximately 50 pounds and maneuver, stand, or bend within confined equipment enclosures

Other requirements

  • Willingness to travel less than 10% for supplier training sessions and factory acceptance testing

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance through a PPO plan
Dental & vision
Dental and vision insurance through a PPO plan
Retirement plan
401(k) plan; interns initially excluded until they work 1,000 hours
Paid time off
Paid holidays, Flexible time off; temporary employees and interns excluded
Parental leave
Parental leave; temporary employees and interns excluded
Equity
Restricted Stock Units (RSUs) for full-time employees; temporary employees and interns excluded
Learning & tuition
Growth potential and advancement for team members who have an outsized impact
Meals
Meals provided

Also: commuter benefits

Full job description

From Neuralink’s careers site

About Neuralink:

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world.

Team Description:

Show full descriptionShow less

Operating out of our Fremont cleanroom facility, the Microfabrication group fabricates thin-film polymer electrode arrays (termed "threads") integral to Neuralink implants. Our team executes the complete internal process flow, spanning photolithography, thin-film deposition, etching, polyimide processing, electroplating, metrology, and final release. Collaborating closely with process engineering, quality, and implant assembly teams, we support the ramp from initial development runs to clinical and eventually commercial manufacturing scale. The equipment engineering group directly maintains total tool availability, capability, and qualification across the cleanroom to ensure continuous high-yield array output and rapid iteration.

Job Description and Responsibilities:

  • Maintain continuous operational readiness and uptime for microfabrication equipment, including photolithography steppers, PVD systems, PECVD, plasma etchers, track coaters, electroplating units, and metrology tools.
  • Perform root-cause diagnostics and repairs across electrical, mechanical, vacuum, pneumatic, RF, and control systems, implementing corrective actions to prevent recurrent failures.
  • Establish and execute preventive maintenance protocols, covering chamber cleans, component replacements, seasoning routines, and post-maintenance hardware requalifications.
  • Lead installation, facility integration, qualification (IQ/OQ/PQ), and formal release of new processing equipment, as well as deinstallations or equipment relocations.
  • Monitor key operational metrics such as MTBF, MTTR, tool availability, and SPC data to drive preventive maintenance strategies and inventory planning.
  • Oversee critical spare parts inventory, consumables, vendor service agreements, and technical interface with original equipment manufacturers.
  • Partner with process engineering to resolve yield excursions, optimize tool matching, and execute hardware upgrades to support process development.
  • Generate and maintain SOPs, PM specifications, and equipment logs in compliance with medical device quality standards and change control requirements.
  • Instruct cleanroom technicians and operating staff on proper tool safety protocols, operation, and initial fault diagnosis.
  • Collaborate with facilities management to support sub-fab infrastructure, including high-purity process gases, house vacuum, DI water, and exhaust systems.

Required Qualifications:

  • Bachelor’s degree in mechanical engineering, electrical engineering, materials science, chemical engineering, physics, or a related field, OR equivalent practical experience.
  • 3+ years of direct experience in cleanroom equipment maintenance or engineering for semiconductor, MEMS, or thin-film fabrication tools.
  • Demonstrated expertise troubleshooting vacuum subsystems, RF/plasma generators, automated robotics, and electrical controls via wiring schematics, multimeters, and safety interlocks.
  • Proven record of executing root-cause failure analysis and implementing permanent corrective actions to minimize tool downtime.
  • Experience drafting, executing, and standardizing preventive maintenance procedures alongside hardware qualification plans.
  • In-depth familiarity with cleanroom safety protocols, Lockout/Tagout (LOTO), high-voltage safety, and hazardous chemical or toxic gas handling.
  • Strong technical ownership, sense of urgency, and ability to thrive in a rapid-iteration production environment with shifting priorities.

Preferred Qualifications:

  • Hands-on experience with specialized microfabrication hardware, including photolithography aligners/steppers (ASML, Canon, Nikon), PVD/e-beam thin-film evaporators, PECVD/ALD systems, ICP/RIE plasma etchers, polyimide coaters/ovens, electroplating equipment, or KLA/SEM inspection tools.
  • Background operating within regulated medical device manufacturing environments (ISO 13485 / FDA 21 CFR Part 820), spanning equipment validation, calibration protocols, and formal change control.
  • Proven record of participating in cleanroom ramp-up efforts or transitioning process technologies from early R&D into high-volume production.
  • Proficiency with scripting languages and data analytics (Python, SQL) for equipment performance monitoring, tool sensor analysis, and automated PM scheduling.
  • Direct experience working with computer-integrated manufacturing frameworks, including MES platforms, CMMS software, and statistical process control (SPC).
  • Familiarity with PLC programming, SEMI SECS/GEM communication protocols, and automated tool control software architectures.
  • Demonstrated background processing thin-film flexible polymer substrates or MEMS-based neural interfaces.
  • Track record of managing vendor service contracts, leading major equipment retrofits, and refurbishing legacy fab infrastructure.

Additional Requirements and Competencies:

  • Must be physically present at our Fremont cleanroom, adhering to cleanroom gowning protocols for extended durations.
  • Capability to lift approximately 50 pounds, with physical agility to maneuver, stand, or bend within confined equipment enclosures.
  • Availability for flexible shift coverage, including off-hours, weekends, and on-call rotation to address unscheduled tool downtime or scheduled maintenance.
  • Willingness to travel (<10%) for supplier training sessions and factory acceptance testing (FAT).

Expected Compensation:

The anticipated base salary for this position is expected to be within the following range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. We also believe in aligning our employees’ success with the company's long-term growth. As such, in addition to base salary, Neuralink offers equity compensation (in the form of Restricted Stock Units (RSU)) for all full-time employees.

Base Salary Range:

$77,000—$129,000 USD

What We Offer:

Full-time employees are eligible for the following benefits listed below.

  • An opportunity to change the world and work with some of the smartest and most talented experts from different fields
  • Growth potential; we rapidly advance team members who have an outsized impact
  • Excellent medical, dental, and vision insurance through a PPO plan
  • Paid holidays
  • Commuter benefits
  • Meals provided
  • Equity (RSUs) *Temporary Employees & Interns excluded
  • 401(k) plan *Interns initially excluded until they work 1,000 hours
  • Parental leave *Temporary Employees & Interns excluded
  • Flexible time off *Temporary Employees & Interns excluded

Something wrong with this job? Report it

Similar jobs

Network Engineer

Neuralink · South San Francisco, CA

$83k–$234k/yr · see postingFull-timeOn-site

Wide pay rangeChecked open todayPosted 1 month ago

Robotics Engineer

Neuralink · Austin, TX +1 place

$151k–$281k/yrFull-time

StrongChecked open todayPosted 1 month ago

Security Engineer

Neuralink · Austin, TX +1 place

$123k–$230k/yrFull-time

StrongOpen 4 monthsChecked open todayPosted 4 months ago

Systems Engineer - Compute

Neuralink · Austin, TX +1 place

$83k–$234k/yr · see postingFull-timeOn-site

Wide pay rangeChecked open todayPosted 1 month ago

Digital Verification Engineer

Neuralink · South San Francisco, CA

$131k–$243k/yrFull-time

StrongOpen 3 monthsChecked open todayPosted 3 months ago

Software Engineer - HIL

Neuralink · Austin, TX +1 place

$151k–$281k/yrFull-time

Looks goodChecked open todayPosted 1 month ago

See more like this