Electrical Engineer jobs

Electrical Engineer - Board Design and Test

Neros TechnologiesTorrance, CA5+ years experience

$116k–$162k/yr listed by the employer

Below the typical $181k a year for senior Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 512 senior Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Looks real. 1 thing to check before you apply.

On Neros Technologies’ own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 3 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 90 / 100 · Strong
See all 6 checksShow fewer
How we check

What you’ll do

  • Translate board test requirements into fixture and station specifications, resolving measurement gaps with requirement owners.
  • Design bed-of-nails fixtures, interface boards, metrology electronics, and end-of-line test stations.
  • Define test automation requirements and verify automation against fixture and metrology hardware.
  • Develop flying probe test programs and deploy, qualify, and sustain test stations at company and vendor sites.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of experience in electrical engineering or manufacturing test engineering
  • Ownership of board-level production test hardware from station design through deployment and sustaining at high-volume contract manufacturers
  • Experience designing and debugging bed-of-nails test fixtures and fixture interface PCBs, including test-point and probe selection, pogo-pin interface design, switching and signal-routing architecture
  • Experience specifying fixtures to fixture vendors
  • Experience implementing PCBA end-of-line test, including in-circuit and functional test on bed-of-nails platforms
  • Experience defining test automation software requirements and working with test software engineers to implement them, including instrument control, measurement sequencing, pass/fail limits, calibraton
  • Experience monitoring production test data for a contract manufacturer and using first-pass yield, test coverage, GR&R, Cpk, defect paretos, and station uptime to drive corrective action
  • Experience supporting production of complex electromechanical products such as drones, robotics, aerospace, defense, ground control stations, radios, or other mission-critical systems
  • Experience developing manufacturing test solutions for consumer, automotive, or autonomous products operating in harsh environments (preferred)
  • Experience with high-speed digital interfaces such as PCIe, USB, Ethernet, CAN, SPI, I2C, or MIPI architectures and their associated test methodologies (preferred)

Skills

  • Hands-on custom electronics design, including schematic capture, PCB layout, and bring-up of mixed-signal boards
  • Ability to design signal conditioning, switching, and precision measurement circuits
  • Flying probe test program development from design and fabrication data
  • In-system firmware programming and calibration
  • Proficiency with oscilloscopes, DMMs, source measure units, power analyzers, electronic loads, and switching systems
  • Understanding of measurement accuracy, repeatability, and correlation between lab and production measurements
  • Working familiarity with Python-based test frameworks and test result databases
  • Familiarity with RF systems and testing, including radios, telemetry links, antennas, GPS/GNSS, EW-resilient communications, spectrum analysis, and wireless performance validation (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Highly competitive equity grants are considered part of the total compensation package.

Full job description

From Neros Technologies’ careers site

Who we are

Neros is a defense technology company rebuilding America’s drone industrial base. We design and manufacture high-performance unmanned systems that are tested in combat, iterated at startup speed, and built at massive scale. Our team culture is fast, hands-on, and obsessed with closing the gap between design and deployment.

As drones transform the character of warfare, Neros is delivering the systems the West needs to compete on the modern battlefield and deter the adversaries of democracy. We’re hiring engineers, operators, and builders who want to move fast, take on extreme ownership, and get capability into the hands of warfighters in months, not years.

What you will be doing

Show full descriptionShow less

As an Electrical Engineer - Board Design and Test, you will own how Neros custom printed circuit board assemblies are tested in production: the bed-of-nails fixtures, interface boards, custom measurement electronics, and end-of-line test stations that carry each design from validation into high-volume manufacturing. You will work from test requirements characterized by the Electrical Engineering team, with broad latitude over the measurement architecture, fixture design, and station hardware used to meet them, and you will define the automation requirements for the test software built around them. You will take each station from concept through deployment at our contract manufacturers and in-house production line.

Responsibilities

  • Translate board-level test requirements and design characterization data from the Electrical Engineering department into fixture and station specifications, confirming each requirement can be measured on a bed-of-nails platform and resolving gaps with the requirement owners
  • Design custom bed-of-nails fixtures for PCBA end-of-line test on a modular test interface, including the probe block interface PCB, test-point landing selection, and fixture vendor specifications
  • Design custom metrology electronics where appropriate, including signal conditioning, switching, and measurement circuits, and correlate their results against the design validation data
  • Design and integrate the end-of-line test station deployed in-house and at the PCBA contract manufacturers, covering instrumentation, fixture electronics, programming and calibration interfaces, and station documentation
  • Drive requirements to the Test Systems Software Engineering team for automation of measurements with the station metrology, specifying instrument control, measurement sequencing, pass/fail limits, calibration routines, and test data capture, and verify the delivered automation against the fixture and metrology hardware
  • Support in-house vertical integration of PCBA manufacturing by developing flying probe test programs from design and fabrication data
  • Deploy, qualify, and sustain test stations at vendor sites and Neros headquarters, monitor production test data in real time to support vendor yield and troubleshooting, and travel to vendor sites as required
  • Analyze test coverage, yield performance, and failure trends to drive continuous improvements in test effectiveness, throughput, reliability, and overall manufacturing quality

You should have the following

  • 5+ years of experience in electrical engineering or manufacturing test engineering, with ownership of board-level production test hardware from station design through deployment and sustaining at high-volume contract manufacturers
  • Hands-on custom electronics design experience, including schematic capture, PCB layout, and bring-up of mixed-signal boards, with the ability to design signal conditioning, switching, and precision measurement circuits
  • Proven experience designing and debugging bed-of-nails test fixtures and fixture interface PCBs, including test-point and probe selection, pogo-pin interface design, switching and signal-routing architectures, and specification of fixtures to fixture vendors
  • Proven experience implementing PCBA end-of-line test, including in-circuit and functional test on bed-of-nails platforms, flying probe test program development from design and fabrication data, in-system firmware programming, and calibration
  • Proficiency with bench and rack instrumentation including oscilloscopes, DMMs, source measure units, power analyzers, electronic loads, and switching systems, and an understanding of measurement accuracy, repeatability, and correlation between lab and production measurements
  • Experience defining requirements for test automation software and working with test software engineers to implement them, covering instrument control, measurement sequencing, pass/fail limits, calibration routines, and test data capture, with working familiarity with Python-based test frameworks and test result databases
  • Strong root-cause analysis skills and experience monitoring production test data to support a contract manufacturer, using metrics such as first-pass yield, test coverage, GR&R, Cpk, defect paretos, and station uptime to drive corrective action
  • Experience supporting production of complex electromechanical products such as drones, robotics, aerospace, defense, ground control stations, radios, or other mission-critical systems
  • Ability to work cross-functionally with Electrical Engineering, Test Systems Software Engineering, Firmware, Manufacturing, Quality, and contract manufacturing partners, and willingness to travel to contract manufacturer sites to deploy and support test stations

Nice to Have

  • Experience developing manufacturing test solutions for consumer, automotive or autonomous products operating in harsh environments
  • Familiarity with RF systems and testing, including radios, telemetry links, antennas, GPS/GNSS, EW-resilient communications, spectrum analysis, and wireless performance validation
  • Experience with high-speed digital interfaces such as PCIe, USB, Ethernet, CAN, SPI, I2C, or MIPI architectures and their associated test methodologies

US Salary Range

$115,500 – $162,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Neros' total compensation package.

We’re an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Electrical Engineer IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$130k–$135k/yrFull-timeOn-site

StrongChecked open todayPosted 18 days ago

HW Design Engineer

ALTEN Technology USA · Palo Alto, CA +1 place

$130k–$150k/yrOn-site

StrongChecked open todayPosted 10 days ago

RCA Electrical Engineer

ALTEN Technology USA · Foster City, CA +1 place

$115k–$135k/yrOn-site

StrongChecked open todayPosted 15 days ago

See more like this