Electrical Engineer jobs

Principal FPGA Emulation Engineer

Renesas ElectronicsAustin, TXFull-timeHybridPosted 23 days ago

Pay not listed

Key facts

Experience
10+ years
Degree
Bachelor's degree or equivalent

Looks real. 1 thing to check before you apply.

On Renesas Electronics’ own careers site (SmartRecruiters), checked open today.

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteSmartRecruiters board
  • Checked: Checked open todaySmartRecruiters board
  • Checked: No reposts foundSmartRecruiters board
  • Trust score 95 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Bring ASIC designs up on FPGA and adapt RTL while preserving functional equivalence to the golden design.
  • Map FPGA designs to fit device resources and achieve real-time or near-real-time emulation performance.
  • Build real-time environments that interface with or model analog and power stages, including hardware-in-the-loop setups.
  • Develop pre-silicon debug and visibility using logic analysis, waveform capture, triggering, and assertions; support firmware/software co-development.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Typically 10+ years of FPGA design and implementation experience, including FPGA prototyping or emulation of ASIC/SoC designs
  • Hands-on experience adapting ASIC RTL for FPGA, including clock-gating conversion, memory macro replacement, reset schemes, tri-state conversion, and multi-clock/CDC handling
  • Hardware bring-up and debug experience, including in-system logic analysis, lab instrumentation, and long-run pre-silicon debug
  • Demonstrated technical leadership, including mentoring, reviews, and driving cross-team technical decisions
  • Real-time hardware-in-the-loop emulation and modeling of analog/mixed-signal and power stages, including ADC/DAC/PWM interfaces and plant/converter models (preferred)
  • FPGA DSP implementation and real-time emulation of DSP datapaths, including FIR/IIR/CIC filters, interpolation/decimation, FFT, FEC, and folding/unfolding (preferred)
  • Experience with commercial FPGA prototyping platforms such as Synopsys HAPS, Cadence Protium, or Siemens Veloce (preferred)
  • High-speed interface experience with JESD204B, PCIe, 1G/10G Ethernet, or Aurora (preferred)
  • ASIC design or tape-out exposure, including DFT/scan considerations in emulation (preferred)
  • Ability to architect and build a custom in-house FPGA prototyping platform, including board architecture, high-speed PCB design, signal integrity, and bring-up (preferred)
  • Embedded/microcontroller and firmware co-development experience with C/assembly; MATLAB or C/C++ (preferred)

Education

  • BS or MS in Electrical Engineering, Computer Engineering, or a related field, or equivalent experience

Skills

  • Expert-level RTL design in SystemVerilog and/or VHDL, with deep familiarity working from ASIC-style RTL
  • Deep understanding of FPGA architecture and primitives, and proven ability to map large ASIC RTL designs to FPGA resources for real-time emulation
  • Strong command of FPGA synthesis, place-and-route, timing analysis, and XDC/SDC constraint development on large Xilinx and/or Intel (Altera) devices, using Vivado and/or Quartus
  • Proficiency scripting for automation with TCL and Python
  • Understanding of digital power-conversion control and mixed-signal systems, including converter topologies, control loops, PWM/PFM, and magnetics (preferred)
  • Model-based design with Simulink and/or Xilinx System Generator (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Renesas Electronics’ careers site

Job Description

About the Role

Renesas is seeking a Principal FPGA Emulation & Prototyping Engineer to build and own the FPGA-based platforms that emulate our mixed-signal power ASICs before silicon. Working shoulder to shoulder with our silicon RTL and DSP architects, you will bring their designs up on FPGA to validate real-time digital, mixed-signal, and power-control architectures pre-silicon — proving out control loops, catching RTL issues early, and de-risking tape-out.

Show full descriptionShow less

These FPGA platforms are emulation vehicles, not production hardware. Success is measured by how faithfully and how fast they reproduce the target silicon: functional equivalence to the golden ASIC RTL, real-time (or near-real-time) performance for closed-loop power and DSP validation, and deep visibility for pre-silicon debug.

What You'll Do

  • Partner closely with silicon RTL and DSP architects to bring ASIC designs up on FPGA — advising on FPGA-ability and turning architectural intent into a working, real-time emulation platform.
  • Adapt ASIC RTL for FPGA emulation while preserving functional equivalence to the golden design — handling clock-gating conversion, memory/SRAM macro mapping, reset and initialization schemes, tri-state/bus conversion, and stubbing or modeling of analog/mixed-signal blocks.
  • Map designs onto the FPGA fabric to fit and to hit emulation speed — steering resource inference (DSP/multiplier slices, block vs. distributed memory), clocking, and pipelining so the design achieves the real-time performance the validation requires.
  • Build the real-time environment around the digital core: model or interface to the analog and power stages (ADC/DAC/PWM, gate drivers, plant/converter models), including hardware-in-the-loop with real or emulated power hardware where needed.
  • Develop deep pre-silicon debug and visibility — logic analysis, long-run waveform capture, triggering, and assertions — and enable firmware/software co-development ahead of silicon.
  • Define and continuously improve the emulation methodology, RTL/FPGA-ability guidelines, flows, and automation (TCL/Python).
  • Provide technical leadership: mentor engineers, lead reviews, and drive emulation and tooling decisions across the silicon and systems teams.

Qualifications

Required Qualifications

  • Extensive FPGA design and implementation experience (typically 10+ years), including a track record of FPGA prototyping or emulation of ASIC/SoC designs.
  • Expert-level RTL design in SystemVerilog and/or VHDL, with deep familiarity working from ASIC-style RTL.
  • Deep understanding of FPGA internal architecture and primitives — DSP/multiplier slices, block and distributed RAM, carry chains, and clocking — and a proven ability to map designs onto these resources to fit large ASIC RTL and reach real-time emulation performance (memory/SRAM macro mapping, DSP inference, clock-enable conversion, control-set and fanout management).
  • Hands-on experience adapting ASIC RTL for FPGA: clock-gating conversion, memory macro replacement, reset schemes, tri-state conversion, and multi-clock/CDC handling.
  • Strong command of the full FPGA implementation flow — synthesis, place-and-route, timing analysis, and constraint development (XDC/SDC) — on large Xilinx and/or Intel (Altera) devices, using Vivado and/or Quartus.
  • Hardware bring-up and debug experience: in-system logic analysis (ILA/SignalTap), lab instrumentation, and long-run pre-silicon debug.
  • Proficiency scripting for automation (TCL, Python).
  • Demonstrated technical leadership — mentoring, reviews, and driving cross-team technical decisions.
  • BS or MS in Electrical Engineering, Computer Engineering, or a related field (or equivalent experience).

Preferred Qualifications

  • Real-time, hardware-in-the-loop emulation and modeling of analog/mixed-signal and power stages (ADC/DAC/PWM interfaces, plant/converter models).
  • Understanding of digital power-conversion control and mixed-signal systems — converter topologies, control loops, PWM/PFM, and magnetics — to build faithful models and validate power-control architectures.
  • FPGA DSP implementation and real-time emulation of DSP datapaths: FIR/IIR/CIC filters, interpolation/decimation, FFT, FEC, including high-throughput techniques such as folding/unfolding.
  • Experience with commercial FPGA prototyping platforms such as Synopsys HAPS, Cadence Protium, or Siemens Veloce.
  • Model-based design with Simulink and/or Xilinx System Generator.
  • High-speed interface experience: JESD204B, PCIe, 1G/10G Ethernet, Aurora.
  • ASIC design or tape-out exposure, including DFT/scan considerations in emulation.
  • Ability to architect and build a custom in-house FPGA prototyping platform — board architecture, high-speed PCB design, signal integrity, and bring-up — a plus as we may develop our own hardware in the future.
  • Embedded/microcontroller and firmware co-development experience (C/assembly); MATLAB, C/C++.

Additional Information

Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier. With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world‑leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future.

At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives.

We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process.

Are you ready to join our team and shape the future with us?

Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.

Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

DFT Engineer

Tenstorrent · Austin, TX +2 places

$100k–$500k/yr · see postingHybrid

Wide pay rangeChecked open todayPosted 15 days ago

Power System Engineer

WSP · Houston, TX +6 places

$90k–$157k/yrHybrid

StrongLast seen open yesterdayPosted 19 days ago

Staff Engineer, DFT

Ambiq Micro, Inc. · Austin, TX

StrongPay not listedChecked open todayPosted 19 days ago

See more like this