Engineering jobs

Staff Robotics Systems Integration Engineer

Dyna RoboticsRedwood City, CAFull-timeOn-site7+ years experience

Pay not listed

Looks real. 2 things to check before you apply.

On Dyna Robotics’ own careers site (Ashby), checked open today.

  • To check: Posted by the employer 3 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • To check: No pay range listed, though one is likely required in CAAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: No reposts foundAshby board
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Set hardware reliability and integration priorities using fleet data and customer impact, and inform next-generation hardware decisions.
  • Establish qualification, validation, and release practices for hardware and software changes.
  • Investigate robot faults across hardware, firmware, calibration, controls, and model-side causes; bench-test, repair, and rework hardware.
  • Build fleet health metrics, alerting, calibration tools, test fixtures, and telemetry pipelines.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 7+ years in robotics, mechatronics, hardware test, or reliability engineering
  • Significant experience with fielded hardware rather than lab prototypes
  • Track record of owning technical direction, setting priorities, making hardware tradeoff calls, and influencing partner teams
  • Experience with Datadog or similar and PR-based workflows
  • Experience with teleoperation systems, VR interfaces, or data-collection fleets (preferred)
  • Hardware qualification (EVT/DVT/PVT) or manufacturing and incoming test experience (preferred)
  • Experience as an early member of a hardware team or building a function from scratch (preferred)
  • Track record of building tools and SOPs that other engineers adopt (preferred)

Skills

  • Ability to tear down, repair, and recommission electromechanical assemblies using tools such as a soldering iron, multimeter, and calipers
  • Deep familiarity with mechanical actuator failures, including backlash, wear, preload loss, and end-stop damage
  • Working knowledge of robot control, including impedance and torque-controlled actuators and controller state lifecycles
  • Fluency with quasi-direct-drive actuators, encoders, torque and current telemetry, CAN, and calibration and zeroing procedures
  • Strong Python for data analysis and tooling
  • Time-series analysis of noise floors, drift, and persistence rules
  • Ability to distinguish measured from commanded data and correlation from cause, and avoid setting baselines on contaminated data
  • MuJoCo simulation sanity-checking (preferred)

Other requirements

  • Work on-site in Redwood City

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Dyna Robotics’ careers site

Dyna Robotics builds general-purpose robots powered by a proprietary embodied AI foundation model with top-in-industry generalization and real-world performance. Already deployed with customers across multiple industries, our robots do commercial-grade work in the physical world. Our team comes from Google DeepMind, Meta, and Cruise, and we're backed by CRV, First Round, and other leading investors.

As a Staff Robotics Systems Integration Engineer, you’ll own the hardware and systems health of our humanoid robot fleet, and shape how our hardware strategy evolves as we scale.

Show full descriptionShow less

This is an early, high-ownership seat. You won’t inherit a roadmap, you’ll help write it. You’ll set technical direction for fleet reliability, hardware qualification, calibration, and test infrastructure, and influence hardware decisions across mechanical, electrical, firmware, and controls.

It’s also genuinely hands-on. The same person who sets the long-term reliability strategy should be comfortable pulling an arm off a robot, probing a suspect driver board, soldering a fix, and designing the bracket that makes the repair stick. You’ll sit at the intersection of hardware, firmware, controls, and data, and you’ll be the person the team calls when a robot does something nobody can explain.

This is a full-time, on-site position in Redwood City.

WHAT YOU’LL DO

  • Hardware Roadmap: Define and drive the hardware reliability and integration priorities based on fleet data and customer impact.
  • Hardware Strategy: Turn field evidence into input for next-generation actuator selection, electrical architecture, thermal design, and serviceability, and make the case for those changes with mechanical, electrical, and firmware partners.
  • Qualification & Release Standards: Establish qualification, validation, and release practices (EVT/DVT/PVT-style gates, incoming test, pre-merge validation).
  • Root-Cause Analysis: Actuator dropouts, encoder and calibration drift, thermal events, CAN bus faults, and control-stack bugs, separating true hardware degradation from firmware, calibration, and model-side causes.
  • Hands-On Hardware Work: Bench-test, rework, and repair actuators and electronics, and design and build the fixtures, jigs, brackets, and small modifications that go with them. Turn evidence on backlash, wear, preload, and hard-stop behavior into concrete design changes, in close partnership with the mechanical team.
  • Fleet Health Systems: Health metrics and alerting tuned to real faults rather than noise floors, calibration and characterization tooling with safety gates, and telemetry pipelines for bandwidth-constrained robots (MCAP, npz, episode archives).
  • Code Review & Documentation: Review PRs across firmware, control code, and deployment config, and write runbooks, SOPs, and incident reports clean enough that a teammate can pick the work up cold.

WHAT YOU’LL BRING

  • The Experience: 7+ years in robotics, mechatronics, hardware test, or reliability engineering, with significant time on fielded hardware rather than lab prototypes.
  • Technical Leadership: A track record of owning technical direction: setting priorities, making hardware tradeoff calls, and influencing partner teams without formal authority.
  • Comfort with Ambiguity: You’d rather define the problem and the plan than wait for them.
  • Hands-On Instincts: Soldering iron, multimeter, calipers, and the ability to tear down, repair, and re-commission electromechanical assemblies without waiting on another team.
  • Actuator Mechanics: Deep familiarity with how actuators fail mechanically (backlash, wear, preload loss, end-stop damage), and enough design sense to hold your own in a design review.
  • Robot Controls: Working knowledge of robot control (impedance and torque-controlled actuators, controller state lifecycles) to recognize when a “hardware” fault is actually a controls bug.
  • Actuators & Telemetry: Fluency with quasi-direct-drive actuators, encoders, torque and current telemetry, CAN, and calibration and zeroing procedures.
  • Python & Data Analysis: Strong Python for data analysis and tooling, with solid time-series instincts around noise floors, drift, and persistence rules, plus experience with Datadog or similar and PR-based workflows.
  • Rigor About Evidence: You distinguish measured from commanded and correlation from cause, and you won’t set a baseline on contaminated data.

BONUS POINTS FOR

  • Teleoperation & Data Collection: Experience with teleoperation systems, VR interfaces, or data-collection fleets.
  • Hardware Qualification: Hardware qualification (EVT/DVT/PVT) or manufacturing and incoming test experience.
  • Early-Team Experience: Experience as an early member of a hardware team or building a function from scratch.
  • Simulation: MuJoCo simulation sanity-checking.
  • Tooling & SOPs: A track record of building tools and SOPs that other engineers actually adopt.

Don’t let a checklist stop you. Data shows that underrepresented groups often only apply if they meet 100% of the criteria. We value problem-solving and grit over keyword matching. If you’re passionate about robotics, no matter your discipline, we want to hear from you, even if you don't check every box.

At Dyna Robotics, we build technology for the real world, which requires a team as diverse as the environments our robots inhabit. We are an equal opportunity employer committed to technical rigor and mutual respect.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Mechanical Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted yesterday

Research Engineer

Dyna Robotics · Redwood City, CA

Pay not listedFull-timeOn-site

Looks good2 to checkChecked open todayPosted 7 months ago

Hardware Support Engineer II

Dyna Robotics · Redwood City, CA

Pay not listedFull-timeOn-site

Looks good2 to checkChecked open todayPosted 9 months ago

See more like this