Engineering jobs

Sustainment Engineer / Integrated Logistics Support Specialist

CHAOS IndustriesEl Segundo, CA +1 placeOn-sitePosted today

$180k–$250k/yr listed by the employer

Key facts

Where
El Segundo, CA · Los Angeles, CA · on-site
Experience
8+ years
Degree
Bachelor's degree
Clearance
TS SCI clearance required

Looks real and checked open today.

On CHAOS Industries’ own careers site (Greenhouse).

Trust score ready Nov 27

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 27
See all 4 checksShow fewer
How we check

What you’ll do

  • Own the ILS plan and product support approach, including maintenance concepts, reliability and maintainability targets, and logistics support analysis.
  • Define maintainability criteria and support equipment needs, and verify access and component handling in the digital mock-up.
  • Plan and provision flight-test spares, technical data, maintenance procedures, training, and fleet support arrangements.
  • Establish FRACAS, track failures and sustainment risks, and coordinate corrective actions and configuration changes.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • DAU/DAWIA Life Cycle Logistics certification (preferred)

Experience

  • 8+ years of sustainment, product support, or integrated logistics support experience on military aircraft or UAS programs, including a program taken through flight test or fielding
  • Strong background in FMECA, reliability-centered maintenance, level-of-repair analysis, logistics support analysis, and reliability, maintainability, and availability modeling
  • Working knowledge of aircraft maintenance at the organizational and depot level
  • Experience with technical data and logistics product data in S1000D and GEIA-STD-0007 or MIL-STD-1388-2B, and with FRACAS tools and processes
  • Familiarity with DoD acquisition and sustainment practices and engineering change and configuration control processes
  • Direct experience with modular, attritable, low-cost, or mass-producible aircraft or UAS programs (preferred)
  • Familiarity with S3000L and S5000F specifications (preferred)
  • Experience with Life Cycle Sustainment Plans, Product Support Business Case Analysis, Contractor Logistics Support, and performance-based logistics (preferred)
  • Experience as an aircraft maintainer or field service engineer, or in military aviation logistics (preferred)

Education

  • Bachelor's degree in Aerospace, Mechanical, Industrial, or Systems Engineering, Logistics, or a related discipline

Other requirements

  • Ability to obtain or maintain Secret, Top Secret, or SCI clearance (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical benefits 100% paid for by the company, FSA and HSA
Dental & vision
Dental and vision benefits 100% paid for by the company
Retirement plan
401(k) with a 50% company match up to 6% of pay
Paid time off
Unlimited PTO
Equity
Pre-IPO stock option grants
Bonus
Annual bonuses are coming soon
Life & disability insurance
Life insurance
Meals
Free daily lunch while working onsite and a fully stocked kitchen
Relocation help
Relocation assistance
Other
Casual dress code

Full job description

From CHAOS Industries’ careers site

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats.

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, and London. For more information, please visit www.chaosinc.com.

Role Overview:

Show full descriptionShow less

We are seeking an experienced Sustainment Engineer / Integrated Logistics Support (ILS) Specialist to establish supportability as a design property for a Massed Modular Aircraft (MMA) program, supporting a platform architecture designed for low-cost, high-rate, distributed production. This role owns the product support approach from concept through prototype flight test and production transition, including reliability and maintainability, level-of-repair and logistics support analysis, provisioning, technical data, and the failure reporting loop, with particular emphasis on a two-level maintenance concept and a ground footprint suited to massed, distributed operations of an attritable aircraft. The ideal candidate brings deep aircraft sustainment expertise combined with a design-influence mindset suited to low-cost, mass-producible aircraft concepts, rather than traditional depot-centric support programs.

Responsibilities:

  • Establish and own the Integrated Logistics Support Plan and supporting product support planning across the ten ILS elements, including maintenance levels, contractor versus organic support, and the two-level maintenance concept, and provide logistics input to milestone decisions and design reviews.
  • Define reliability and maintainability targets (MTBF, MTTR, turnaround time, and ground footprint) in the requirement baseline, flow R&M allocations to every design group at the interface boundaries, and report allocation status at each design review.
  • Issue maintainability design criteria (access, line-replaceable unit handling, panel and fastener discipline, common tooling) to Structures, Avionics, Mechanical Systems, and Manufacturing, and verify access and LRU handling in the digital mock-up ahead of PDR.
  • Lead logistics support analysis, including RAM-C analysis, level-of-repair analysis, maintenance task analysis, FMECA, and reliability-centered maintenance, and compute MTBF, MTTR, and operational availability against the requirement baseline.
  • Define support and test equipment requirements, favoring common and COTS equipment, and feed them into the ground support equipment order.
  • Build the flight test spares list (LRUs, donor parts, consumables), place the provisioning order for flight test spares and long-lead LRUs, and burn down the shortage list ahead of ground test.
  • Own the technical data plan, including the S1000D interactive electronic technical manual skeleton, alignment with configuration management, and the as-maintained configuration baseline, and write and validate maintenance and turnaround procedures with the flight test crew, with airworthiness co-signature on flight-critical items.
  • Support training needs analysis and maintainer training development, and plan packaging, handling, storage, transportation, and facilities for the flight test and fielded fleet.
  • Stand up and run the failure reporting, analysis, and corrective action system (FRACAS) from the first bench test through flight test, and bring FRACAS-driven design changes to the configuration change board.
  • Develop the life cycle cost and operating and support cost picture and provisioning cost estimates that feed the production readiness review and low-rate initial production decision, and contribute sustainment content and labor estimates to proposals.
  • Plan in-service support: monitor fleet performance and maintenance data, manage engineering changes, retrofits, and service bulletins, and coordinate corrective actions with engineering.
  • Prepare logistics support, level-of-repair, two-level maintenance, and corrosion control content for government plan briefings and formal support plans, and represent sustainment at PDR, CDR, and government technical interchange meetings.
  • Coordinate and provide technical direction to third-party engineering services supporting the discipline, including scope definition, work package assignment, review and acceptance of deliverables, and integration of their output into the program design, analysis, and configuration baselines.
  • Identify and manage sustainment risks, including spares availability, technical data completeness, and maintainability shortfalls discovered in flight test.

Minimum Requirements:

  • Bachelor's degree in Aerospace, Mechanical, Industrial, or Systems Engineering, Logistics, or related discipline.
  • 8+ years of sustainment, product support, or integrated logistics support experience on military aircraft or UAS programs, including a program taken through flight test or fielding.
  • Strong background in supportability analysis methods, including FMECA, reliability-centered maintenance, level-of-repair analysis, logistics support analysis, and reliability, maintainability, and availability modeling.
  • Working knowledge of aircraft maintenance at the organizational and depot level, with the ability to engage credibly with maintainers, flight test crews, suppliers, and the customer.
  • Experience with technical data and logistics product data in S1000D and GEIA-STD-0007 or MIL-STD-1388-2B, and with FRACAS tools and processes.
  • Familiarity with DoD acquisition and sustainment practices (e.g., USAF or Army), and with engineering change and configuration control processes.
  • Strong communication, technical writing, and cross-functional skills, with the ability to serve as the primary sustainment point of contact for program leadership, engineering teams, suppliers, and the customer.

Preferred Requirements:

  • Direct experience with modular, attritable, low-cost, or mass-producible aircraft/unmanned aircraft system (UAS) programs.
  • Familiarity with the S-Series specifications (S3000L, S5000F) to support Foreign Military Sales or Direct Commercial Sales customers.
  • Experience with DoD product support frameworks, including Life Cycle Sustainment Plans, Product Support Business Case Analysis, Contractor Logistics Support, and performance-based logistics.
  • Experience as an aircraft maintainer or field service engineer, or in military aviation logistics, and DAU/DAWIA Life Cycle Logistics certification.
  • Ability to obtain/maintain Secret/Top Secret/SCI clearance.

Why CHAOS?

  • Health Benefits: medical, dental, and vision benefits 100% paid for by the company
  • Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
  • Our Perks: rree daily lunch while you're working onsite, fully-stocked kitchen, unlimited PTO, casual dress code
  • Compensation Components: competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
  • Team Growth: 500+ employees and counting across 5 global offices

Salary range: $180,000 - $250,000

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations.

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

Something wrong with this job? Report it

Similar jobs

Mechanical Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted yesterday

Optical Engineer

LLNL · Livermore, CA

$146k–$223k/yrFull-timeOn-site

StrongChecked open todayPosted yesterday

Antenna Engineer

CHAOS Industries · El Segundo, CA +1 place

$138k–$154k/yrFull-timeOn-site

StrongChecked open todayPosted 21 days ago

Staff Mechanical Engineer

CHAOS Industries · El Segundo, CA +1 place

$167k–$209k/yrFull-timeOn-site

StrongChecked open todayPosted 7 days ago

See more like this