Electrical Engineer jobs

Embedded Controls Engineer

Mesh Optical TechnologiesGardena, CA +1 place

$140k–$170k/yr listed by the employer

Above the typical $138k a year for mid-level Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 170 mid-level Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Where
Gardena, CA · Los Angeles, CA
Experience
2+ years
Degree
Bachelor's degree

Looks real. 1 thing to check before you apply.

On Mesh Optical Technologies’ own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 9 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Design, implement, and tune real-time control loops for thermal management, optical alignment, motion control, and process regulation.
  • Develop embedded C/C++ firmware, integrate sensors and actuators, and write low-level peripheral drivers.
  • Model and simulate control systems; implement sensor-fusion, filtering, calibration, and self-tuning algorithms.
  • Add logging, telemetry, diagnostics, fault handling, and validation for production deployment.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 2+ years of experience designing and implementing real-time control systems on embedded platforms
  • Experience with sensor integration, actuator interfacing, and low-level peripheral drivers (I²C, SPI, ADC, PWM, encoders)
  • Experience with state-space controllers, LQR/LQG, model predictive control (MPC), adaptive control, or system identification methods (preferred)
  • Experience with motion control systems, including stepper and servo motor drives, trajectory planning, and encoder feedback (preferred)
  • Experience with thermal control systems, including multi-zone regulation and transient thermal management (preferred)
  • Familiarity with optical or photonic systems where control loops manage alignment, power regulation, or wavelength tuning (preferred)
  • Experience with FPGA-based control implementations or high-speed digital control loops (preferred)
  • Experience with hardware-in-the-loop (HIL) testing and simulation environments (preferred)
  • Background in robotics, precision mechatronics, or semiconductor equipment (preferred)
  • Experience deploying control systems at production scale, including calibration, self-test, and fault recovery for high-volume manufactured products (preferred)

Education

  • Bachelor's or Master's degree in electrical engineering, computer engineering, mechanical engineering, aerospace engineering, or a related discipline with coursework in control systems

Skills

  • Strong proficiency in C and/or C++ for embedded development, including bare-metal and RTOS environments
  • Solid foundation in classical and modern control theory, including PID tuning, frequency-domain analysis, and stability assessment
  • Proficiency in Python or MATLAB for modeling, simulation, data analysis, and test automation
  • Strong debugging skills across hardware and software boundaries, including use of oscilloscopes, logic analyzers, and serial debug interfaces

Other requirements

  • Willingness to work extended hours and weekends as needed

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance, with significant cost covered by the company for employees and dependents.
Dental & vision
Vision and dental insurance, with significant cost covered by the company for employees and dependents.
Retirement plan
Access to a 401(k) retirement plan.
Paid time off
Flexible PTO; 3 weeks of accrued vacation and 10 company holidays per year.
Parental leave
Paid parental leave.
Equity
Eligibility for long-term incentives including company stock options.
Bonus
Eligibility for discretionary bonuses awarded for exceptional achievements.
Relocation help
Relocation assistance to Los Angeles.

Full job description

From Mesh Optical Technologies’ careers site

EMBEDDED CONTROLS ENGINEER

Mesh Optical Technologies was founded on the belief that optical photons will be at the center of advanced technologies in the coming century. Making advanced technology ubiquitous means building at scale, and that’s exactly what we’re doing at Mesh.

Show full descriptionShow less

Our products and factory equipment rely on real-time control systems that must be precise, stable, and fast—from thermal regulation and optical alignment loops to motion control and process automation. We are seeking an Embedded Controls Engineer who combines deep embedded programming expertise with strong controls and algorithms knowledge. You will design, implement, and tune the control systems that keep our hardware operating at the edge of its performance envelope.

RESPONSIBILITIES

  • Design, implement, and tune real-time control loops (PID, state-space, feedforward, adaptive) for thermal management, optical alignment, motion control, and process regulation across product and factory systems
  • Develop embedded firmware in C/C++ for microcontrollers and DSPs, including bare-metal and RTOS-based architectures, with emphasis on deterministic timing and low-latency execution
  • Model and simulate control systems to predict dynamic behavior, assess stability margins, and validate controller designs prior to hardware deployment
  • Implement sensor fusion, filtering (Kalman, complementary), and signal conditioning algorithms to extract clean, actionable signals from noisy real-world measurements
  • Bring up and integrate new sensors, actuators, and motor drives, defining hardware-software interfaces and writing low-level drivers (I²C, SPI, ADC, PWM, encoder interfaces)
  • Develop calibration routines and self-tuning algorithms that enable production-scale deployment of control systems with unit-to-unit variation
  • Instrument control systems for observability—logging, telemetry, and diagnostic interfaces that support real-time monitoring, fault detection, and post-hoc analysis
  • Collaborate with electrical, mechanical, optical, and manufacturing engineering teams to co-design systems where control performance is tightly coupled to hardware design
  • Support production deployment of control systems, including validation, fault handling, and graceful degradation strategies for field-deployed units
  • Contribute to Python-based tooling for system identification, data analysis, simulation, and automated testing of control system performance

QUALIFICATIONS

  • Bachelor's or Master's degree in electrical engineering, computer engineering, mechanical engineering, aerospace engineering, or a related discipline with coursework in control systems
  • 2+ years of experience designing and implementing real-time control systems on embedded platforms
  • Strong proficiency in C and/or C++ for embedded development, including experience with bare-metal and RTOS environments
  • Solid foundation in classical and modern control theory, including PID tuning, frequency-domain analysis, and stability assessment
  • Experience with sensor integration, actuator interfacing, and low-level peripheral drivers (I²C, SPI, ADC, PWM, encoders)
  • Proficiency in Python or MATLAB for modeling, simulation, data analysis, and test automation
  • Strong debugging skills across hardware and software boundaries, including use of oscilloscopes, logic analyzers, and serial debug interfaces
  • Ability to work independently in fast-moving, cross-functional environments
  • Willingness to work extended hours and weekends as needed

PREFERRED EXPERIENCE

  • Experience with advanced control techniques: state-space controllers, LQR/LQG, model predictive control (MPC), adaptive control, or system identification methods
  • Experience with motion control systems, including stepper and servo motor drives, trajectory planning, and encoder feedback
  • Experience with thermal control systems, including multi-zone regulation and transient thermal management
  • Familiarity with optical or photonic systems where control loops manage alignment, power regulation, or wavelength tuning
  • Experience with FPGA-based control implementations or high-speed digital control loops
  • Experience with hardware-in-the-loop (HIL) testing and simulation environments
  • Background in robotics, precision mechatronics, or semiconductor equipment
  • Experience deploying control systems at production scale, including calibration, self-test, and fault recovery for high-volume manufactured products
  • Familiarity with version control (Git), CI/CD pipelines, and collaborative embedded development workflows

COMPENSATION AND BENEFITS:

Pay range: Embedded Controls Engineer: $140,000.00 - $170,000.00/per year

Title and base salary are determined on a case by case basis commensurate with experience and merit.

In addition to base salary, compensation for this role includes:

  • Eligibility for long-term incentives including company stock options and discretionary bonuses awarded for exceptional achievements.
  • Comprehensive medical, vision, and dental insurance with significant cost covered by the company for yourself and dependents.
  • Paid parental leave and flexible PTO (3 weeks accrued vacation and 10 company holidays per year).
  • 401(k) retirement plan access.
  • Relocation assistance to sunny Los Angeles.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 7 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 9 days ago

Electrical Engineer IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$130k–$135k/yrFull-timeOn-site

StrongChecked open todayPosted 18 days ago

See more like this