Electrical Engineer jobs

Staff RF Engineer

LeoLabs, Inc.Menlo Park, CAFull-timeOn-site

$180k–$205k/yr listed by the employer

Below the typical $208k a year for staff-level Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 101 staff-level Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
10+ years
Degree
Bachelor's degree
Clearance
Security clearance required

Looks real. 1 thing to check before you apply.

On LeoLabs, Inc.’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 95 / 100 · Strong
See all 6 checksShow fewer
How we check

What you’ll do

  • Lead architecture and development of RF modules and define RF architecture for radar platforms.
  • Design and analyze RF circuits; develop RF budgets, cascade analyses, and performance models.
  • Drive RF PCB design from schematic and layout through bring-up, validation, and production release.
  • Characterize, debug, calibrate, and optimize hardware in the lab, and support integration, manufacturing, field deployments, and root-cause investigations.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 10+ years of experience designing RF and microwave electronics
  • Demonstrated experience designing complex RF PCBAs from concept through production
  • Experience designing radar, aerospace, communications, or defense electronics (preferred)
  • Experience with phased arrays, antenna design, or beamforming systems (preferred)
  • Experience with RF calibration, metrology, and EMI/EMC mitigation (preferred)

Education

  • Bachelor's degree in Electrical Engineering or a related discipline
  • Master's degree in Electrical Engineering with an emphasis in RF or microwave engineering (preferred)

Skills

  • Proficiency with Altium Designer or equivalent PCB design software
  • Deep understanding of RF system design, microwave circuit theory, and radar fundamentals
  • Experience with RF simulation tools such as ADS and CST
  • Strong laboratory skills using VNAs, spectrum analyzers, signal generators, oscilloscopes, power meters, and related RF instrumentation
  • Experience developing engineering tools and automation using Python
  • Familiarity with PLM systems such as Arena (preferred)

Other requirements

  • Must be eligible to obtain and maintain a U.S. personnel security clearance
  • Must be eligible to obtain the required U.S. Department of State authorizations under ITAR

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Stock options
Bonus
Bonus; amount not specified
Other
Benefits are mentioned, but specific benefits are not listed

Full job description

From LeoLabs, Inc.’s careers site

Why LeoLabs?

At LeoLabs, we’re building the living map of activity in space. Through our proprietary global radar network and AI-enabled analytics platform, we collect millions of measurements daily on more than 25,000 objects in low Earth orbit (LEO). Our radar-powered intelligence protects billions in assets, monitors adversarial behavior, and ensures safe operations for commercial and government missions.

Show full descriptionShow less

We’re not just building technology, we are redefining global security, safety, and transparency in space. As orbital activity accelerates and threats grow more complex, LeoLabs is a trusted partner for Space Domain Awareness, Space Traffic Management, and Satellite Operations for top-tier space operators and allied defense organizations.

If you're looking to work on mission-critical challenges at the forefront of aerospace, national security, and AI, your impact starts here.As a Staff RF Engineer, you will lead the development of the RF electronics that define the performance of our next-generation radar systems. You will own challenging RF design problems across multiple programs, from architecture and requirements through design, validation, and production. This is a hands-on technical role for an experienced engineer who enjoys solving difficult problems, leading design work, and delivering robust hardware that performs in demanding environments.

You will work closely with electrical, mechanical, embedded software, manufacturing, and systems engineers to develop high-performance radar hardware from concept through deployment. This is a full-time, onsite position based in Menlo Park, California. Occasional travel may be required to support hardware integration and field activities.

You will be responsible for:

  • Lead the architecture and development of RF modules for next-generation radar platforms
  • Design and analyze RF circuits including receivers, transmitters, amplifiers, filters, frequency synthesis, and antenna interfaces
  • Develop system-level RF budgets, cascade analyses, and performance models
  • Drive RF PCB design from schematic capture through layout, bring-up, validation, and production release
  • Perform laboratory characterization, debugging, calibration, and performance optimization using modern RF test equipment
  • Work closely with electrical, mechanical, embedded software, and manufacturing engineers to integrate RF hardware into complete radar systems
  • Conduct technical design reviews, evaluate technical tradeoffs, and help define the RF architecture for future radar platforms
  • Support manufacturing, field deployments, and root-cause investigations as products transition into production

Qualifications

  • Bachelor's degree in Electrical Engineering or a related discipline
  • 10+ years of experience designing RF and microwave electronics
  • Proficiency with Altium Designer or equivalent PCB design software
  • Demonstrated experience designing complex RF PCBAs from concept through production
  • Deep understanding of RF system design, microwave circuit theory, and radar fundamentals
  • Experience with RF simulation tools such as ADS and CST
  • Strong laboratory skills using VNAs, spectrum analyzers, signal generators, oscilloscopes, power meters, and related RF instrumentation
  • Experience developing engineering tools and automation using Python
  • Must be eligible to obtain and maintain a U.S. personnel security clearance

Preferred Qualifications

  • Master's degree in Electrical Engineering with an emphasis in RF or microwave engineering
  • Experience designing radar, aerospace, communications, or defense electronics
  • Experience with phased arrays, antenna design, or beamforming systems
  • Experience with RF calibration, metrology, and EMI/EMC mitigation
  • Familiarity with PLM systems such as Arena

Within 1 month, you’ll:

  • Complete onboarding and become familiar with LeoLabs' radar architecture, development process, and RF design environment
  • Build an understanding of current hardware programs and future product roadmap
  • Begin contributing to ongoing RF design efforts and technical discussions

Within 3 months, you’ll:

  • Take ownership of a major RF module under active development
  • Lead RF design reviews and guide key architectural decisions
  • Drive laboratory validation and performance optimization of prototype hardware

Within 6 months, you’ll:

  • Own the RF development of a next-generation radar subsystem from design through prototype validation
  • Establish yourself as the technical authority for complex RF design challenges
  • Mentor engineers across the RF & Electrical Engineering Team

Within 12 months, you’ll:

  • Deliver multiple RF designs into production
  • Shape the RF architecture for future radar platforms
  • Be recognized as a key technical contributor that delivers high quality RF designs impacting programs across the organization

Compensation

Salary offers are based on a combination of factors, including, but not limited to, experience, skills, and location. The base salary range for this position $180,000 USD - $205,000 USD + bonus + stock options + benefits

Note: The salary range for this position is benchmarked based on the designated primary work location for the role. Final compensation may vary depending on the selected candidate's work location, applicable market data, experience, qualifications, and other job-related factors.

ITAR Requirements

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be eligible to obtain the required authorizations from the U.S. Department of State. More information regarding ITAR can be found at DDTC’s website

#CJ

All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Microwave/RF Engineer

LLNL · Livermore, CA

$146k–$223k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

Electrical Engineer

Hill Minimal 112022 · Livermore, CA

$118k–$148k/yrOn-site

StrongChecked open todayPosted 17 days ago

Power Grid Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

RCA Electrical Engineer

ALTEN Technology USA · Foster City, CA +1 place

$115k–$135k/yrOn-site

StrongChecked open todayPosted 16 days ago

See more like this