Production Worker & Machine Operator jobs

KanBan Operator

Senior plcOceanside, CAFull-timeOn-site

$17–$18/hr listed by the employer

Key facts

Pay per year
≈ $35k–$37k
Below the typical $48k a year for entry-level Production Worker & Machine Operator jobs in CaliforniaHow we compare

How we compare. ≈ $35k–$37k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 48 entry-level Production Worker & Machine Operator jobs in California that list pay, from the employers' own postings. About means within 5%.

Experience
None required

Looks real. 1 thing to check before you apply.

On Senior plc’s own careers site (SmartRecruiters), checked open today.

  • To check: Posted by the employer 14 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteSmartRecruiters board
  • Checked: Checked open todaySmartRecruiters board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundSmartRecruiters board
  • Trust score 75 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Cut material and straight tubes to specified lengths, measuring for accuracy.
  • Face and deburr tube ends using end-finish and deburring machines.
  • Log completed jobs in KPI/ERP systems and bundle and load jobs onto staging racks.
  • Perform preventative maintenance on equipment, including checking belts, lubricating machines, and inspecting or replacing saw blades.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Education

  • High school diploma or equivalent

Skills

  • English verbal and written skills
  • Basic math skills for addition and subtraction
  • General understanding of manufacturing processes and use of hand tools

On the job

  • Ability to wear required PPE, including respirators and safety glasses

Other requirements

  • U.S. Person or properly licensed foreign person for facility access under ITAR/EAR restrictions

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Retirement plan
Matching 401(k) plan
Paid time off
Paid vacation
Learning & tuition
Tuition reimbursement
Wellness & mental health
Wellness benefits and employee wellness activities
Flexible schedule
Flexible hours
Other
Employee recognition program, Community involvement initiatives

Full job description

From Senior plc’s careers site

Company Description

Who is Steico Industries?

STEICO has made its name manufacturing precision tube and duct assemblies to the world's major airframe manufacturers. We manufacture tube and duct assemblies. We work with a wide variety of materials including aluminum, steel, titanium, and other alloys and produce parts of all complexities. STEICO holds accreditations with NADCAP and is certified to AS9100 and ISO14001. Our focus on responsiveness and continuous improvement regularly creates manufacturing innovation. STEICO is an integral part of our customers supply chains that include Boeing, Lockheed Martin, BAE, Northrop Grumman, Honeywell, Honda Aviation, and many others.

Show full descriptionShow less

About our parent company:

Senior is an FTSE UK based international manufacturing Group with 26 operations in 12 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. We have a long history of well-respected brands and an excellent reputation in our key market sectors. Senior delivers value to its customers and shareholders via operational excellence that is underpinned by its people and processes.

Senior’s experienced manpower support, effective use of raw material, and high technology enable it to deliver optimized components within a short development time and at most competitive prices.

The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors.

Our global values underpin what we do, and how we do it …

Job Description

NO Experience Needed

AM Shift: Monday - Friday 7:00AM - 3:30PM

Pay: $17.00 - $18.00 an hour depending on experience

Safety – Integrity – Customer Focus – Respect & Trust – Accountability – Excellence

As a KanBan Operator you will:

Processing parts through the Kanban production area including cutting of material to specific lengths using horizontal band saws and chop saws as well as facing and deburring of tubes.

What will my responsibilities include?

  • Cutting material to length with horizontal/chop saws based off start dates on the daily cut list. Responsible for setting the length using the saw length guide and cut the amount of tubes needed for the job as specified on the job traveler.
  • Facing of tube ends using 2CP/3CP end finish machines. This includes picking up the tube, placing it in the dies located inside the jaws of the machine, closing the jaws around the tube and cycling the facing arbor to square the end of the tube
  • Deburring of tube ends using deburr machine that uses an arbor with sharp edges. This includes picking up the tube and positioning the tube inside diameter (ID) on the ID deburr tool and then on outside diameter (OD) deburr tool within the machine
  • Trimming straight tubes to customer required length using calipers to measure for accuracy
  • Logging of jobs that are completed in the KPI/ERP systems
  • Bundle and load jobs to Bend staging racks sorted by job number, material type, quantity and center line radius
  • Performing equipment preventative maintenance. This includes, but is not limited to, checking of the belts on 2CP/3CP end finish machine for wear, adding lubrication to machines, inspecting and replacing saw blades, if needed
  • Maintaining 5’s + Safety of department
  • Meeting goals established in department for productivity
  • Using required PPE required for the department
  • Other reasonable duties as business and operational needs dictate

Qualifications

What key skills and experience do I need?

  • Requires the ability communicate verbally and in writing in a clear, easily understood manner
  • Requires English verbal and written skills
  • Ability to wear special PPE required to do the job (respirators and safety glasses)

Education:

  • High School diploma or equivalent
  • NO Experience Needed
  • Basic math skills to perform basic calculations such as addition and subtraction
  • General understanding of manufacturing processes and use of hand tools

Additional Information

Why Join Steico Industries, Inc.?

Joining Steico Industries, Inc. a company of Senior Plc. means not only a rewarding career with a tight-knit and collaborative team, but you will also enjoy a competitive compensation package that includes a market-led base salary and a comprehensive benefits package along with wellness benefits, employee recognition program, matching 401k plan, paid vacation, flexible hours, employee wellness activities, tuition reimbursement, and community involvement initiatives.

Prior to an offer of employment, applicant employment references maybe requested.

Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data.

To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible.

Please understand that you will only be considered an applicant if you apply for a posted position directly through our Company website and meet the qualifications of the job. If you need a reasonable accommodation to apply, please contact the Steico Industries at 760-438-8015.

Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Label Operator

Senior plc · Oceanside, CA

$18–$19/hrFull-timeOn-site

StrongChecked open todayPosted 4 days ago

Technician, Foundry

Samuel, Son & Co. 1855 · Riverside, CA

Pay unclear · see postingOn-site

Pay not listedChecked open todayPosted 23 days ago

See more like this