Aerospace Engineer jobs

Principal Airframe Engineer - IPT Lead [AERO]

CHAOS IndustriesEl Segundo, CA +1 placeOn-sitePosted 1 month ago

$200k–$320k/yr listed by the employer

Above the typical $234k a year for principal-level Aerospace Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 33 principal-level Aerospace Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Where
El Segundo, CA · Los Angeles, CA · on-site
Experience
15+ years
Clearance
TS SCI clearance required

This job is closed.

The employer took it down 5 days ago, after 15 days open. Here are similar open jobs.

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Note: Last seen open 20 days agoLive check
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

Similar open jobs

Project Engineer III

Senior plc · Burbank, CA

$130k/yrFull-timeOn-site

StrongChecked open todayPosted 8 days ago

See more like this

What you’ll do

  • Lead modular airframe structural design, architecture, interfaces, and trade studies from concept through qualification and production transition.
  • Apply DFM/DFA principles and partner with Manufacturing Engineering to develop producible joints, tooling concepts, and assembly sequences for high-rate, distributed production.
  • Lead or oversee structural analyses and define and execute the structural test program to substantiate the design.
  • Support airworthiness qualification and maintain structural analysis and substantiation documentation for design reviews.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 15+ years of aircraft structural/airframe design experience, including ownership of structural design from concept through qualification/production
  • Experience applying design-for-manufacture/design-for-assembly principles to reduce production cost and complexity at scale
  • Experience with composite and/or advanced joining methods such as bonding or friction stir welding suited to high-rate production
  • Experience supporting structural substantiation for military and/or civil airworthiness requirements
  • Familiarity with MIL-HDBK-516 or equivalent military airworthiness processes
  • Direct experience with modular, attritable, low-cost, or mass-producible aircraft/UAS programs (preferred)

Education

  • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline
  • Advanced degree (preferred)

Skills

  • Strong background in structural analysis methods (static strength, fatigue, damage tolerance) and associated analysis tools such as NASTRAN, FEMAP, or equivalent FEA tools

Other requirements

  • Ability to obtain/maintain Secret/Top Secret/SCI clearance (preferred)

Benefits

Health insurance
Medical benefits 100% paid for by the company, FSA and HSA
Dental & vision
Dental and vision benefits 100% paid for by the company
Retirement plan
401(k) with 50% company match up to 6% of pay
Paid time off
Unlimited PTO
Equity
Pre-IPO stock option grants
Bonus
Annual bonuses (coming soon)
Life & disability insurance
Life insurance
Meals
Free daily lunch while working onsite and a fully stocked kitchen
Relocation help
Relocation assistance

Full job description

From CHAOS Industries’ careers site

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats.

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, and London. For more information, please visit www.chaosinc.com.

Show full descriptionShow less

Role Overview: We are seeking an experienced Principal Airframe Engineer to lead airframe structural design and development for a Massed Modular Aircraft (MMA) program, supporting a platform architecture designed for low-cost, high-rate, distributed production. This role owns the airframe structural design approach from concept through qualification and production transition, with particular emphasis on modularity, producibility, and design-for-mass-manufacture principles that enable rapid, scalable build rates across multiple production sites or partners. The ideal candidate brings deep aircraft structures expertise combined with a strong producibility/manufacturing mindset suited to attritable, low-cost, or distributed-production aircraft concepts, rather than traditional low-rate, highly customized airframe programs.

Responsibilities:

  • Lead the structural design and architecture of a modular airframe system, including primary and secondary structure, load paths, and major structural interfaces between modules/sections.
  • Define and enforce a modular design architecture that supports interchangeable sections/subassemblies, common interfaces, and scalable configuration variants across the platform family.
  • Own structural trade studies (material selection, joining methods, load path optimization) balancing performance, weight, cost, and producibility at scale.
  • Ensure structural design integrates cleanly with propulsion, avionics, payload, and subsystem installations across modular interface boundaries.
  • Apply design-for-manufacture and design-for-assembly (DFM/DFA) principles throughout the structural design process to enable high-rate, low-touch-labor production.
  • Partner with Manufacturing Engineering to define producible joint designs, tooling concepts, and assembly sequences compatible with distributed or multi-site production.
  • Drive design decisions that reduce part count, fastener count, and non-recurring tooling complexity without compromising structural integrity or certification/airworthiness requirements.
  • Support make/buy and sourcing strategy discussions with Supply Chain to ensure structural designs are compatible with available/scalable material and fabrication sources.
  • Lead or oversee structural analysis (static strength, fatigue/damage tolerance, dynamic loads) supporting design maturity and airworthiness substantiation.
  • Define and execute the structural test program (coupon, element, component, and full-scale static/fatigue testing) required to substantiate the design.
  • Support airworthiness qualification activities in accordance with applicable military airworthiness criteria (e.g., MIL-HDBK-516) and/or civil-derivative standards as applicable to the program's certification basis.
  • Maintain structural analysis and substantiation documentation to support government and internal design reviews.
  • Serve as the senior technical authority for airframe structures on the program, representing structures at Preliminary Design Review (PDR), Critical Design Review (CDR), and government technical interchange meetings.
  • Partner with Systems Engineering, Program Management, Manufacturing, Quality, and Supply Chain to align structural design maturity with program schedule and cost targets.
  • Identify and manage structural/technical risks, including material supply risk, fatigue/damage tolerance uncertainty, and producibility risk at scale.

Minimum Requirements:

  • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline; advanced degree preferred.
  • 15+ years of aircraft structural/airframe design experience, including demonstrated ownership of structural design from concept through qualification/production.
  • Strong background in structural analysis methods (static strength, fatigue, damage tolerance) and associated analysis tools (e.g., NASTRAN, FEMAP, or equivalent FEA tools).
  • Demonstrated experience applying design-for-manufacture/design-for-assembly principles to reduce production cost and complexity at scale.
  • Experience with composite and/or advanced joining methods (e.g., bonding, friction stir welding) suited to high-rate production.
  • Experience supporting structural substantiation for military and/or civil airworthiness requirements.
  • Familiarity with MIL-HDBK-516 (Airworthiness Certification Criteria) or equivalent military airworthiness processes.

Preferred Requirements:

  • Direct experience with modular, attritable, low-cost, or mass-producible aircraft/unmanned aircraft system (UAS) programs.
  • Ability to obtain/maintain Secret/Top Secret/SCI clearance

Salary Range: $200,000 - $320,000

Why CHAOS?

  • Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
  • Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
  • Our Perks: Free daily lunch while you're working onsite, fully-stocked kitchen, unlimited PTO, casual dress code
  • Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
  • Team Growth: 500+ employees and counting across 5 global offices

[ENTER SALARY/HOURLY RANGE]

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations.

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

Something wrong with this job? Report it · This flag looks wrong