Quality Control Inspector jobs

Quality Assurance Receiving Inspector

FenderCorona, CAOn-site

$20–$25/hr listed by the employer

Key facts

Pay per year
≈ $42k–$52k
Below the typical $69k a year for mid-level Quality Control Inspector jobs in CaliforniaHow we compare

How we compare. ≈ $42k–$52k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 70 mid-level Quality Control Inspector jobs in California that list pay, from the employers' own postings. About means within 5%.

Experience
3+ years

Looks real. 1 thing to check before you apply.

On Fender’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 95 / 100 · Strong
See all 6 checksShow fewer
How we check

What you’ll do

  • Inspect incoming components and raw materials against drawings, purchase orders, and specifications using precision measuring tools and surface plate layouts.
  • Apply GD&T and AQL sampling plans to assess conformance and lot acceptance.
  • Document inspection results; identify, segregate, and report nonconforming material; and support MRB and supplier corrective action activities.
  • Review supplier certifications and FAI reports, verify equipment calibration, and communicate quality issues to relevant teams.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3–5 years of mechanical/dimensional inspection experience in a manufacturing environment
  • Hands-on experience with standard precision measuring tools
  • Experience inspecting plated, coated, and finished components, including coating/plating thickness verification
  • Experience with nonconformance/MRB processes and first article inspection
  • Experience using ERP/quality systems for receiving and inspection transactions

Education

  • High school diploma or equivalent

Skills

  • Ability to read and interpret engineering drawings, blueprints, and GD&T
  • Proficiency with surface plate set-ups and layout inspection techniques
  • Working knowledge of sampling procedures and AQL-based acceptance sampling
  • Solid math skills and ability to accurately record and interpret measurement data

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical
Dental & vision
Dental
Retirement plan
401(k)
Other
Equipment purchase program

Also: paid time off

Full job description

From Fender’s careers site

Fender Musical Instruments Corporation is a world-famous brand with offices across the globe. Fender was born in Southern California and has built a worldwide influence beyond the studio and the stage. A Fender is more than an instrument; it’s a cultural symbol that resonates globally.

Show full descriptionShow less

We are currently searching for an exceptional Quality Assurance Receiving Inspector to join our team in Corona, CA. The Receiving Inspector is responsible for performing dimensional, visual, and functional inspection of incoming purchased components, raw materials, and supplier-provided parts to verify conformance to engineering drawings, specifications, and quality standards. Working from blueprints and applying geometric dimensioning and tolerancing (GD&T), the Receiving Inspector uses surface plate set-ups and a full range of precision measuring instruments to accept, reject, or route nonconforming material, ensuring only conforming components enter production.

Essential Functions:

  • Perform incoming (receiving) inspection of purchased parts, components, and raw materials against engineering drawings, purchase order requirements, and applicable specifications.
  • Interpret and apply GD&T callouts, datums, and tolerances from blueprints and technical drawings.
  • Set up and perform surface plate layouts and inspections using height gages, gage blocks, angle plates, sine bars, and related tooling.
  • Conduct dimensional inspection using standard measuring tools, including calipers, micrometers, height gages, bore/depth gages, thread gages, pin/plug gages, dial indicators, radius/thread gages, and optical comparators.
  • Apply statistical sampling procedures and AQL-based acceptance sampling plans to determine lot acceptance or rejection.
  • Perform visual and dimensional inspection of plated, coated, and finished parts, including verification of finish, appearance, and coating/plating thickness where specified.
  • Document inspection results, record measured data, and complete inspection reports and receiving records accurately.
  • Identify, tag, segregate, and document nonconforming material; initiate nonconformance reports (NCRs) and support material review board (MRB) and supplier corrective action activities.
  • Verify that inspection, measuring, and test equipment is within calibration prior to use and support the calibration program.
  • Review supplier documentation such as certificates of conformance (C of C), material/test certifications, and first article inspection (FAI) reports.
  • Communicate quality issues to Quality, Purchasing, Supply Chain, and Engineering, and support disposition of held material.
  • Maintain a clean, organized, and safe work area and comply with all safety, quality, and housekeeping (5S) standards.
  • Additional duties as assigned

Qualifications:

  • High school diploma or equivalent.
  • 3–5 years of mechanical/dimensional inspection experience in a manufacturing environment.
  • Demonstrated ability to read and interpret engineering drawings, blueprints, and GD&T.
  • Proficiency with surface plate set-ups and layout inspection techniques.
  • Hands-on experience with all standard precision measuring tools (calipers, micrometers, height gages, indicators, thread/pin gages, optical comparator, etc.).
  • Working knowledge of sampling procedures and AQL-based acceptance sampling.
  • Solid math skills and attention to detail with the ability to accurately record and interpret measurement data.
  • Ability to work independently, prioritize, and manage inspection workload to support production schedules.
  • Experience inspecting plated, coated, and finished components, including coating/plating thickness verification.
  • Experience with nonconformance/MRB processes and first article inspection.
  • Experience using ERP/quality systems (e.g., SAP) for receiving and inspection transactions.

About Fender Musical Instruments:

Fender is required by law in certain jurisdictions to include a pay scale in the job posting for this position. “Pay scale” means the salary or hourly wage range that Fender reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position takes into account the wide range of factors that Fender considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. If this is a remote position, the pay scale disclosed herein may be adjusted further based upon the applicable geographic differential associated with the location from which the successful candidate will work. Please note that it is not typical for a Fender employee to be at or near the top of the pay scale for their role – especially as a new hire – and compensation decisions are dependent on the facts and circumstances of each case. Subject to the foregoing, the current pay rate for this position is $20.00 to $25.00 per hour.

#LI-Onsite

Fender Musical Instruments Corporation (FMIC) is one of the world’s leading musical instrument manufacturers, marketers and distributors, whose portfolio of brands includes Fender®, Squier®, Gretsch®, Jackson®, EVH®, Charvel® and Groove Tubes®, among others. For more information, visit www.fender.com. FMIC offers a competitive benefits package which includes medical, dental, 401(k), paid time off, and an equipment purchase program to help you get the band back together. Fender Musical Instruments Corporation is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veterans’ status, sexual orientation, or any other protected factor.

We handle the personal information you provide as a job applicant in accordance with our Applicant Privacy Notice.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Quality Inspector

Astro PAK · Downey, CA

$20–$21/hrOn-site

StrongChecked open todayPosted 19 days ago

Senior Quality Inspector

Rocket Lab Corporation · Long Beach, CA

$33–$41/hrOn-site

StrongChecked open todayPosted 11 days ago

Quality Inspector

Precision Resource · Huntington Beach, CA

$23–$26/hrFull-timeOn-site

StrongChecked open todayPosted 21 days ago

Quality Inspector

Precision Resource · Huntington Beach, CA

$23–$26/hrFull-timeOn-site

StrongChecked open todayPosted 21 days ago

See more like this