Electrical Engineer jobs

Senior Wireless Design Engineer

AndurilCosta Mesa, CA +1 placePosted 1 month ago

$146k–$241k/yr listed by the employer

Above the typical $181k a year for senior Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 512 senior Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Where
Costa Mesa, CA · Mountain View, CA
Clearance
Security clearance required

Looks real and checked open today.

On Anduril’s own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Design RF circuits, subsystems, antennas, and antenna arrays, and perform link-budget and system-level analysis.
  • Test RF hardware and antennas on benches and in chambers; validate performance against requirements.
  • Analyze compliance, RF exposure, coexistence, and desense, and support spectrum authorization or certification.
  • Integrate GPS/GNSS receivers and optimize RF and antenna performance using 3D EM simulation and S-parameter analysis.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Familiarity with military and commercial communication system compliance standards
  • Familiarity with SAR and military RF exposure limits (e.g., MPE) and their influence on antenna placement and design
  • Experience with multi-radio coexistence and desense analysis, including UWB emissions requirements and distinguishing conducted from radiated coupling mechanisms
  • Proficiency with RF bench equipment (VNA, spectrum analyzer, signal generator) and prior experience testing antennas in antenna/anechoic chambers
  • Hands-on experience designing and testing RF circuits, subsystems, or antennas, including antenna arrays
  • Working knowledge of GPS/GNSS receiver architectures, active antenna bias circuits, and RF connector/mechanical interface design considerations
  • Strong background in schematic reviews, CAD analysis, and RF/high-speed PCB layout best practices
  • Exposure to spectrum authorization or certification processes for military RF systems (preferred)

Skills

  • Proficiency with 3D EM simulation software for S-parameter analysis and RF/antenna performance modeling

Other requirements

  • Ability to travel up to 10%
  • Must be eligible to obtain and maintain a clearance

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Highly competitive equity grants are included in the majority of full-time offers.
Other
Comprehensive, competitive benefits package available at little to no cost to employees.

Full job description

From Anduril’s careers site

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

Show full descriptionShow less

ABOUT THE TEAM Connected Warfare (CW): The Connected Warfare simulaivision builds systems to support global command and control missions. We create joint, time sensitive, multi domain, ubiquitous, connected mesh ecosystems. Our ecosystem enables connected warfare with disproportional impact by connecting every mac robot, human, and sensor in every domain, bringing together hundreds of thousands of end points across the globe. We are the substrate that provides the source of truth for time sensitive decision, effectively transforming the way that militaries close kills chains and enable mission autonomy.

Warfighter Systems (WS): Warfighter Systems brings cutting-edge technology directly to those on the front lines. Wearable tech, immersive mission command tools, and seamlessly integrated software and hardware create an ecosystem that enhances situational awareness, survivability, and combat effectiveness. From training to battlefield operations, Anduril’s Warfighter Systems organization designs tools that move at the speed of war, ensuring that soldiers are better connected, more lethal, and more resilient.

ABOUT THE ROLE We are seeking a talented Senior Wireless Design Engineer to join our Electrical Engineering Design team. In this role, you will collaborate closely with electrical, mechanical, and systems design teams, as well as our EMC and compliance groups, to deliver RF hardware that meets performance and regulatory requirements. The ideal candidate will bring strong compliance and validation instincts alongside solid RF and antenna design skills, ensuring hardware performs reliably and meets applicable regulatory and coexistence requirements before it ships. Strong consideration will be given to candidates who can bridge design and validation — taking a concept from schematic and simulation through chamber characterization and compliance sign-off.

WHAT YOU'L DO

  • Ensure RF designs comply with relevant military and commercial communication system standards and protocols, and support spectrum authorization/certification processes for military RF systems.
  • Evaluate designs against SAR and military RF exposure limits, coordinating testing as needed.
  • Assess coexistence and desense between onboard radios (e.g., UWB, GNSS, LTE) — distinguishing conducted vs. radiated coupling paths — and recommend mitigations for cross-band interference and antenna detuning.
  • Bench and chamber test RF hardware and antennas (e.g., using VNAs, spectrum analyzers, signal generators, and antenna/anechoic chambers) to validate performance against requirements.
  • Partner with EMC and mechanical engineering to root-cause field or test failures that span RF, electrical and mechanical domains.
  • Design RF circuits and subsystems, including front-ends, amplifiers, filters, and transceivers; perform link budget and system-level RF analysis, including receiver saturation and sensitivity trade-offs.
  • Design and integrate antennas and antenna arrays, balancing RF performance against mechanical and system constraints, including connector/mechanical interface tolerances.
  • Support GPS/GNSS receiver design and integration, including active antenna bias circuits, filtering, and interference immunity.
  • Utilize 3D EM simulation tools and S-parameter analysis to model and optimize RF and antenna performance.
  • Review schematics and CAD designs for RF performance, signal integrity, and manufacturability.
  • Ability to travel up to 10%.
  • Must be eligible to obtain and maintain a clearance.

BASIC QUALIFICATIONS

  • Familiarity with military and commercial communication system compliance standards, and, ideally, exposure to spectrum authorization or certification processes for military RF systems.
  • Familiarity with SAR and military RF exposure limits (e.g., MPE) and how they influence antenna placement and design.
  • Experience with multi-radio coexistence and desense analysis, including UWB emissions requirements, and the ability to distinguish conducted from radiated coupling mechanisms.
  • Proficiency with RF bench equipment (VNA, spectrum analyzer, signal generator) and prior experience testing antennas in antenna/anechoic chambers.
  • Hands-on experience designing and testing RF circuits, subsystems, or antennas, including antenna arrays.
  • Working knowledge of GPS/GNSS receiver architectures, active antenna bias circuits, and RF connector/mechanical interface design considerations.
  • Strong background in schematic reviews, CAD analysis, and RF/high-speed PCB layout best practices.
  • Proficiency with 3D EM simulation software (e.g., Ansys HFSS, Altair FEKO, or CST Studio Suite) for S-parameter analysis and RF/antenna performance modeling.

US Salary Range

$146,000—$241,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including:

Benefits

At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.

Protecting Yourself from Recruitment Scams

Anduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.

To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:

-

No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.

  • Please always verify communications:
  • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.
  • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to contact@anduril.com.

-

Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.

-

What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to contact@anduril.com. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.

Data Privacy

By submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

To view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

HW Design Engineer

ALTEN Technology USA · Palo Alto, CA +1 place

$130k–$150k/yrOn-site

StrongChecked open todayPosted 10 days ago

Senior FPGA Engineer II

Rocket Lab Corporation · Long Beach, CA

$143k–$215k/yrOn-site

StrongChecked open todayPosted 16 days ago

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 8 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 10 days ago

See more like this