Assembler jobs

Structures Technician (Starship)

SpaceXHawthorne, CAOn-site

$23–$27/hr listed by the employer

Key facts

Pay per year
≈ $48k–$56k
About the typical $52k a year for entry-level Assembler jobs in CaliforniaHow we compare

How we compare. ≈ $48k–$56k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 40 entry-level Assembler jobs in California that list pay, from the employers' own postings. About means within 5%.

Schedule
2nd shift
Experience
1+ years

This job is closed.

The employer took it down 2 days ago, after 19 days open. Here are similar open jobs.

  • To check: Posted by the employer 6 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Note: Last seen open 19 days agoLive check
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

Similar open jobs

Manufacturing Assembler

Quantum Fuel Systems LLC · Lake Forest, CA

$21–$23/hrFull-timeOn-site

StrongLast seen open yesterdayPosted 16 days ago

Manufacturing Technician

Skild AI · San Mateo, CA

$70k–$150k/yr · see postingOn-site

Wide pay rangeChecked open todayPosted 19 days ago

See more like this

What you’ll do

  • Modify, repair, assemble, and install rocket and spacecraft structures, components, and subcomponents.
  • Operate manufacturing equipment and use hand and power tools to align, drill, finish, fasten, shim, and seal parts.
  • Perform component and assembly tests, including pressurized, cycle, and fatigue testing.
  • Handle parts and equipment, maintain tooling, and inspect completed work against drawings.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 1+ years of experience in hardware assembly, test, maintenance, material handling, and/or installation; OR a certificate from an accredited trade skills program in A&P, manufacturing, and/or электроnс
  • Experience drilling, reaming, honing, and/or countersinking straight and close-tolerance holes (preferred)
  • Experience gained through the military or within an aviation manufacturing company (preferred)
  • Experience using hand tools, handheld power tools, floor-mounted power tools, and precision measuring tools (preferred)
  • Experience making basic layouts on parts or assemblies to establish reference points and check dimensions (preferred)
  • Experience reading and interpreting engineering drawings, blueprints, and specifications (preferred)

Education

  • High school diploma or equivalency certificate

Skills

  • Ability to visualize three-dimensional shapes from two-dimensional views and understand symbols, flag notes, and general notes (preferred)
  • Ability to perform basic arithmetic, including decimals and fractions (preferred)

On the job

  • Able to stand for at least 8 hours and lift up to 50 lbs. unassisted; able to perform repetitive assembly and related physical tasks

Other requirements

  • Willingness to work all shifts, overtime, and weekends as needed; 2nd shift is approximately 2:00 PM–1:00 AM
  • Meet ITAR eligibility: be a U.S. citizen or national, lawful permanent resident, refugee, or asylee, or be eligible to obtain the required U.S. Department of State authorizations

Benefits

Health insurance
Comprehensive medical coverage
Dental & vision
Dental and vision coverage
Retirement plan
Access to a 401(k) retirement plan
Paid time off
May accrue 3 weeks of paid vacation; eligible for 10 or more paid holidays per year; paid sick leave under company policy
Parental leave
Paid parental leave
Equity
May be eligible for company stock, stock options, or long-term cash awards; Employee Stock Purchase Plan offers additional stock at a discount
Bonus
Potential discretionary bonuses
Life & disability insurance
Short- and long-term disability insurance and life insurance
Other
Various other discounts and perks

Full job description

From SpaceX’s careers site

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

STRUCTURES TECHNICIAN (STARSHIP) - 2ND SHIFT

RESPONSIBILITIES:

  • Modify, repair, assemble, and install rocket and spacecraft components and subcomponents
  • Align parts and secure in place using clecos or tooling/hand clamps
  • Operate and utilize sheet metal manufacturing equipment such as CNCs, brake presses, and rollers
  • Operate and utilize advanced manufacturing equipment such as robots, welders, and manufacturing software.
Show full descriptionShow less
  • Perform routine maintenance procedures for up keep on tooling and equipment as required
  • Install mechanical fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner)
  • Facilitate and perform component and assemblies testing operations on rocket and spacecraft structures, components and subcomponents (Pressurized testing, cycle testing, fatigue testing, etc.)
  • Shim and/or trim parts as required
  • Select drill bits, reamers and/or countersinking tools for pilot and full-size holes
  • Locate, drill pilot holes using drill motor and proper size drill bit(s)
  • Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor
  • Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners
  • Use solvents to clean surfaces prior to sealing or assembly
  • Apply sealant, Alodine, primer, adhesives, special finishes
  • Load, lift and unload parts with use of cranes, forklifts, and custom tools
  • Determine and obtain correct type and size fasteners
  • Cold work holes to prepare for close tolerance fastener installation
  • Install bushings into housings using arbor press and/or hydraulic puller
  • Apply liquid nitrogen to facilitate installation of bushings
  • Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing

BASIC QUALIFICATIONS:

  • High school diploma or equivalency certificate
  • 1+ years of experience in hardware assembly, test, maintenance, material handling, and/or installation; OR certificate from an accredited trade skills program in A&P, manufacturing, and/or electronics

PREFERRED SKILLS AND EXPERIENCE:

  • Experience drilling, reaming, honing and/or countersinking straight and close tolerance holes
  • Experience gained through the military or within an aviation manufacturing company
  • Experience using various types of hand tools and/or hand-held power tools, floor-mounted power tools and precision measuring tools
  • Capable of visualizing a three-dimensional shape from a two-dimensional view and understanding symbols, flag notes, and general notes
  • Ability to perform basic arithmetic calculations accurately (addition, subtraction, multiplication, division, decimals and fractions)
  • Experience making basic layouts on parts or assemblies in order to establish reference points and to check dimensions
  • Experience reading and interpreting engineering drawings, blueprints, and specifications

ADDITIONAL REQUIREMENTS:

  • Must be willing to work all shifts, overtime, and weekends as needed. 2nd shift: (~2:00 PM - 1:00 AM).
  • Must be able to stand for extended periods – 8 hours min
  • Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
  • Must be able to lift up to 50 lbs. unassisted

COMPENSATION AND BENEFITS:

Pay range: Structures Technician/Level 1: $23.00 - $27.00/hour Structures Technician/Level 2: $26.00 - $32.50/hour Structures Technician/Level 3: $31.00 - $38.00/hour

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law.

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Something wrong with this job? Report it · This flag looks wrong