Electrical Engineer jobs

Spacecraft Power Electronics Engineer

Katalyst Space TechnologiesBroomfield, COPosted 2 months ago

$105k–$145k/yr listed by the employer

Key facts

Experience
3+ years
Degree
Bachelor's degree or equivalent

This job is closed.

The employer took it down 3 days ago, after 17 days open. Here are similar open jobs.

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Note: Last seen open 3 days agoLive check
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

Similar open jobs

Power System Engineer

WSP · Houston, TX +6 places

$90k–$157k/yrHybrid

StrongChecked open todayPosted 18 days ago

DFT Engineer

Tenstorrent · Austin, TX +2 places

$100k–$500k/yr · see postingHybrid

Wide pay rangeChecked open todayPosted 14 days ago

FPGA Engineer

Tomorrow.io · Golden, CO

$140k–$160k/yrOn-site

StrongChecked open todayPosted 15 days ago

RF Engineer

Anduril · Broomfield, CO +1 place

$127k–$170k/yr

StrongChecked open todayPosted 21 days ago

See more like this

What you’ll do

  • Design, modify, review, and qualify spacecraft electrical power systems and their power-electronics hardware.
  • Support bench, functional, performance, thermal-vacuum, vibration, and qualification testing of EPS hardware.
  • Integrate and test power interfaces with avionics, flight software, mechanisms, payloads, and other spacecraft subsystems.
  • Run stress, margin, and performance tests across voltage, load, thermal, startup, fault-response, and stability limits.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3–5 years of experience designing, testing, or integrating power electronics, spacecraft EPS hardware, battery/solar power interfaces, or closely related high-reliability power systems
  • Experience designing or modifying power-electronics schematics and PCB layouts, including high-current routing, grounding, thermal considerations, creepage/clearance, current sensing, and EMI/EMC-safe
  • Exposure to spacecraft or embedded-system power architectures, including power distribution, load switching, battery management interfaces, solar array regulation, or power telemetry
  • Exposure to SPI, I2C, UART, CAN, or Ethernet and mixed-signal design best practices for telemetry, control, and power-system interfaces
  • Hands-on experience with hardware bring-up, bench testing, and debugging using oscilloscopes, electronic loads, power supplies, DMMs, logic analyzers, or related lab equipment
  • Experience writing or executing test procedures, documenting results, and driving board- or component-level troubleshooting through root cause and corrective action
  • Experience integrating power electronics with other spacecraft or embedded subsystems
  • Exposure to environmental testing such as thermal vacuum or vibration (preferred)

Education

  • Bachelor’s degree in electrical engineering or equivalent field

Skills

  • Strong understanding of switch-mode power supply design, DC/DC converter architectures, compensation/stability, magnetics selection, protection circuitry, and practical power electronics debugging
  • Proficiency in Altium or a similar ECAD tool for schematic capture, PCB layout review, design release, and documentation

Other requirements

  • Willingness to work extended hours and weekends as needed
  • Non-U.S. persons must be authorized to access ITAR-controlled information before employment begins

Benefits

Health insurance
Medical coverage
Dental & vision
Dental and vision coverage
Retirement plan
401(k) retirement plan
Paid time off
Unlimited paid time off
Parental leave
Paid parental leave
Equity
Employee stock options and long-term equity incentives
Bonus
Eligibility for discretionary bonuses
Meals
Catered team lunch every Wednesday
Relocation help
Relocation assistance, when applicable

Full job description

From Katalyst Space Technologies’ careers site

Katalyst Description:

Show full descriptionShow less

Katalyst is an American technology company focused on dynamic space operations. We are building a fleet of dual-use multipurpose robotic space vehicles to create the future where maneuvering, upgrading, refueling, resupply and exploration are as routine as they are on Earth. Getting to space and overcoming the gravity well is only half the story. What you do there is the future. We are not building the trains. We are building the machines that lay down the tracks. By developing the foundational capabilities that make sustained, responsive operations possible, we enable a new era of space exploration that strengthens national security and ensures freedom of action in an increasingly contested domain.

Katalyst Culture:

Working at Katalyst is intense, hands-on, and deeply rewarding. You’ll take real ownership and see your work move from concept to operations in an environment where the problems are hard and the impact is real. We value humility, craftsmanship, and doing things the right way, even when it’s harder. You’ll work closely with thoughtful, driven teammates who push each other to do their best. Oh, and we're dog friendly!

Benefits:

  • Stock options & equity
  • Medical, dental, and vision coverage
  • 401(k)
  • Unlimited PTO
  • Catered lunches

What You’ll Do

  • Contribute to the design, iteration, and qualification ofKatalyst’s spacecraft Electrical Power System (EPS), including power conversion, power distribution, battery interface electronics, solar array interfaces, protection circuitry, and subsystem power interfaces.
  • Design,modify, and review schematics, PCB layouts, interface definitions, and analysis packages for spacecraft power electronics, with emphasis on switch-mode power supplies, DC/DC converters, load switching, current sensing, fault protection, and EMI-aware layout practices.
  • Support integrated operation of EPS hardware during functional, performance, and qualification testing, working directly with test engineers to execute bench, thermal vacuum, vibration, and other qualification test campaigns.
  • Help own integrated functional testing of EPS hardware with avionics, flight software, mechanisms, payloads, and other spacecraft subsystems, ensuring power interfaces behave correctly across nominal, off-nominal, and fault cases.
  • Plan and execute targeted stress, margin, and performance testing, exercising hardware across design extremes such as input voltage range, load transients, thermal limits, startup sequencing, fault response, and converter stability.
  • Help define design changes and architecture improvements for future spacecraft power systems, including EPS feature upgrades, power budget impacts, redundancy considerations, telemetry needs, and mission-specific power requirements.

Your Ideal Background

  • Bachelor’s degree in electrical engineering or equivalent field.
  • 3-5 years of experience designing, testing, or integrating power electronics, spacecraft EPS hardware, battery/solar power interfaces, or closely related high-reliability power systems.
  • Strong understanding of switch-mode power supply design, DC/DC converter architectures, compensation/stability, magneticsselection, protection circuitry, and practical power electronics debugging.
  • Experience designing ormodifying schematics and PCB layouts for power electronics, including high-current routing, grounding, thermal considerations, creepage/clearance, current sensing, and EMI/EMC-aware layout practices.
  • Proficiency in Altium or a similar ECAD tool for schematic capture, PCB layout review, design release, and documentation.
  • Exposure to spacecraft or embedded-system power architectures, including power distribution, load switching, battery management interfaces, solar array regulation, or power telemetry.
  • Exposure to common digital communication standards (SPI, I2C, UART, CAN, Ethernet) and mixed-signal design best practices for telemetry, control, and power-system interfaces.
  • Hands-on experience with hardware bring-up, bench testing, and debugging using oscilloscopes, electronic loads, power supplies, DMMs, logic analyzers, and related lab equipment.
  • Experience writing or executing test procedures, documenting results, and driving board- or component-level troubleshooting through root cause and corrective action.
  • Experience integrating power electronics with other spacecraft or embedded subsystems; exposure to environmental testing such as thermal vacuum or vibration is a plus but not required.

Additional Requirements: Must be willing to work extended hours and weekends as needed.

Compensation and Benefits:

At Katalyst, we believe our team should share in the value they help create. In addition to a competitive base salary, employees are eligible to participate in our Employee Stock Option and Equity Plan, providing the opportunity for long-term ownership in the company’s success.

The anticipated base salary range for this position is $105,000–$145,000 annually. Individual compensation is determined based on relevant experience, education, job-related knowledge and skills, and the responsibilities of the role.

Our benefits and perks include:

  • Comprehensive medical, dental, and vision coverage
  • Employee stock options and long-term equity incentives
  • 401(k) retirement plan
  • Unlimited paid time off
  • Paid parental leave
  • Relocation assistance, when applicable
  • Eligibility for discretionary bonuses
  • Catered team lunch every Wednesday

Our total rewards package is designed to support your health, financial well-being, work-life balance, and long-term growth alongside Katalyst.

At Katalyst our work on projects involving the U.S. Department of Defense requires adherence to International Traffic in Arms Regulations (ITAR), 22 C.F.R. Parts 120-130, which requires compliance with U.S. export laws before allowing employees to perform certain positions. Currently, our available roles necessitate access to ITAR-controlled information, and as a result, Katalyst would have to ensure any non-US person is authorized access to ITAR information before the commencement of employment. We are committed to equal employment opportunities and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

Something wrong with this job? Report it · This flag looks wrong