Electrical Engineer jobs

Electrical Engineer - Digital Hardware

Star CatcherJacksonville, FLPosted 1 month ago

Pay not listed

Key facts

Experience
5+ years
Degree
Bachelor's degree
US visa
No US visa sponsorship

Looks real. 1 thing to check before you apply.

On Star Catcher’s own careers site (Greenhouse), checked open today.

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 95 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Design digital and mixed-signal circuit card assemblies through requirements, design reviews, detailed design, test planning, and integration and test.
  • Support FPGA/SoC board layouts, backplane interfaces, compute module integration, and high-speed memory interfaces.
  • Perform timing, signal/power integrity, worst-case circuit, thermal, and EMI/EMC analyses for digital hardware.
  • Bring up and debug boards with lab instrumentation, verify signal and power integrity, and support component selection and qualification.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of experience in digital hardware design, FPGA-based systems, or high-speed digital PCB design
  • Experience designing with processors, microcontrollers, FPGA/CPLD, and memory devices (DDRx, SRAM, ROM, Flash)
  • Exposure to backplane-based architectures (e.g., VPX, SpaceVPX, CompactPCI Serial, or similar) (preferred)
  • Exposure to radiation-tolerant digital design practices (preferred)
  • Experience with Altium Designer or equivalent EDA tools (preferred)
  • Exposure to worst-case circuit analysis (WCA) and part derating practices (preferred)
  • Experience with high-speed memory interface design (DDRx) and board technologies such as HDI or back drilling (preferred)
  • Exposure to high-speed digital or optical interfaces and protocols (e.g., Ethernet, PCIe) (preferred)
  • MATLAB, Python, or similar programming experience for analysis or test automation (preferred)

Education

  • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline

Skills

  • Familiarity with FPGA/SoC platforms and associated design toolchains
  • Working knowledge of SI/PI simulation and timing analysis tools (e.g., HyperLynx, Ansys, or equivalent)
  • Familiarity with spacecraft data bus standards (e.g., SpaceWire, CCSDS) (preferred)

Other requirements

  • Pass a thorough background check
  • Provide proof of eligibility to work in the U.S.
  • Meet U.S. Government space technology export eligibility requirements: be a U.S. citizen, lawful permanent resident, protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the,

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive medical coverage
Dental & vision
Comprehensive dental and vision coverage
Retirement plan
401(k) retirement plan
Parental leave
Paid parental leave
Life & disability insurance
Life insurance

Full job description

From Star Catcher’s careers site

Power the future of Space at Star Catcher

Star Catcher is building the first energy grid in space to power the orbital economy.

Today’s spacecraft must generate all of their own power, which caps what they can do and how long they can operate. But what if they could “plug” into a grid, the way buildings do on Earth? Instead of cables and outlets, Star Catcher is building the technology to wirelessly beam energy to spacecraft’s existing solar panels when and where they need it.

Be an early member of a team building an entirely new energy infrastructure at scale to power the next frontier.

Show full descriptionShow less

Star Catcher Industries, Inc., located in Jacksonville, Florida, has an opportunity for an Electrical Engineer - Digital Hardware to support the development of space-to-space power beaming spacecraft and the Star Catcher Network, its orbital power grid.

Key Responsibilities

  • Execute digital hardware and high-speed PCB designs following the CCA design lifecycle: requirements generation, preliminary design, peer reviews, detailed design, test plan generation, and integration and test.
  • Design mixed-signal circuit card assemblies (CCAs) incorporating processors, microcontrollers, FPGA/CPLD, and volatile/non-volatile memory (DDRx, SRAM, ROM, Flash).
  • Support FPGA/SoC board layout, backplane interface implementation, and compute module integration, including high-speed memory interfaces (DDRx) and board technologies such as HDI and back-drilled vias.
  • Utilize schematic capture, constraint-driven layout, simulation, and timing analysis tools to generate and verify circuit card designs.
  • Support timing analysis, SI/PI simulation, and worst-case circuit analysis (WCA) for digital hardware designs, including thermal, EMI/EMC, and component derating considerations.
  • Support board bring-up, debug, and signal/power integrity verification alongside embedded software engineers, using lab instrumentation (oscilloscopes, logic analyzers, signal generators, DC power supplies) to troubleshoot at the component and board level.
  • Assist with component selection and qualification for digital hardware, including evaluating component tolerances for design margin.
  • Work independently to generate digital CCA design solutions.

Basic Qualifications

  • Education: Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline.
  • Experience: 5+ years of experience in digital hardware design, FPGA-based systems, or high-speed digital PCB design.
  • Experience designing with processors, microcontrollers, FPGA/CPLD, and memory devices (DDRx, SRAM, ROM, Flash).
  • Familiarity with FPGA/SoC platforms and associated design toolchains.
  • Working knowledge of SI/PI simulation and timing analysis tools (e.g., HyperLynx, Ansys, or equivalent).

Desired Skills

  • Exposure to backplane-based architectures (e.g., VPX, SpaceVPX, CompactPCI Serial, or similar).
  • Exposure to radiation-tolerant digital design practices.
  • Familiarity with spacecraft data bus standards (e.g., SpaceWire, CCSDS).
  • Experience with Altium Designer or equivalent EDA tools.
  • Exposure to worst-case circuit analysis (WCA) and part derating practices.
  • Experience with high-speed memory interface design (DDRx) and board technologies such as HDI or back drilling.
  • Exposure to high-speed digital or optical interfaces and protocols (e.g., Ethernet, PCIe).
  • MATLAB, Python, or similar programming experience for analysis or test automation.

Help us deploy and scale space infrastructure that will drive our utilization of space forward! We offer a highly competitive benefits package including access to comprehensive medical, dental, and vision coverage, 401(k) retirement plan, life insurance, and paid parental leave, in addition to other benefits.

All offers of employment at Star Catcher are contingent upon results of a thorough background check and your ability to provide proof of eligibility to work in the US.

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Star Catcher is an Equal Opportunity Employer; employment with Star Catcher is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Electrical Engineer

Star Catcher · Jacksonville, FL

StrongPay not listedChecked open todayPosted 1 month ago

Electrical Engineer IV

CRB · Jacksonville, FL

Full-timeHybrid

Looks goodPay not listedChecked open todayPosted 10 days ago

Electrical Design Engineer II

Industrial Electric Manufacturing · Jacksonville, FL

On-site

StrongPay not listedChecked open todayPosted 19 days ago

Sr. Electrical Engineer

BB&E · Jacksonville, FL

Pay not listedFull-timeOn-site

Strong2 to checkLast seen open yesterdayPosted 2 months ago

See more like this