Mechanical Engineer jobs

Mechanical Engineer, Space Robotics

GITAILos Angeles, CAFull-timeOn-site

$100k–$155k/yr listed by the employer

Key facts

Experience
1+ years
Degree
Bachelor's degree
US visa
No US visa sponsorship
Clearance
Security clearance required

This job is closed.

The employer took it down 11 days ago, after 8 days open. Here are similar open jobs.

  • To check: Posted by the employer 6 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Note: Last seen open 17 days agoLive check
  • Trust score 80 / 100 · Looks good
See all 6 checksShow fewer
How we check

Similar open jobs

Mechanical Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

Staff Mechanical Engineer

CHAOS Industries · El Segundo, CA +1 place

$167k–$209k/yrFull-timeOn-site

StrongChecked open todayPosted 8 days ago

Senior Mechanical Engineer

CHAOS Industries · El Segundo, CA +1 place

$140k–$176k/yrFull-timeOn-site

StrongChecked open todayPosted 8 days ago

See more like this

What you’ll do

  • Design and iterate mechanical hardware for robotic, spacecraft, satellite, and propulsion systems.
  • Work with electrical and software engineers to define requirements, interfaces, and practical assembly configurations.
  • Assemble, integrate, and maintain prototypes and early builds, using build feedback to improve designs.
  • Plan and execute operational verification, reliability, and quality testing, and use results to improve designs.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 1+ years of relevant experience designing, analyzing, and supporting the manufacturing of electro-mechanical systems or mechanisms; internship, research, and extracurricular project experience counts
  • Experience creating mechanical drawings and maintaining drawing packages

Education

  • Bachelor’s degree in Mechanical Engineering or a closely related discipline

Skills

  • Proficiency with mechanical CAD
  • Hands-on ability with mechanical assembly, integration, and testing

Other requirements

  • Willingness to spend up to 50% of work time outside of Torrance at test sites; travel may increase during critical integration and test campaigns
  • Must be a U.S. citizen, as the role may require eligibility to obtain and maintain a U.S. government security clearance in the future
  • Currently authorized to work in the U.S.; this role is not eligible for visa sponsorship
  • Meet applicable U.S. space technology export-control requirements, including ITAR eligibility or required authorizations

Benefits

Health insurance
Platinum medical plan with 100% company-paid employee coverage and 90% coverage for dependents
Dental & vision
100% company-paid dental and vision coverage for employees; 90% for dependents
Retirement plan
401(k) company match up to 3.5%, with traditional and Roth options
Paid time off
12 paid holidays per year, 12 days of paid vacation per year, and paid sick leave in accordance with applicable law
Equity
Stock option eligibility depending on role
Meals
Free snacks and drinks
Relocation help
Relocation support available for qualifying positions
Other
Regular team events

Full job description

From GITAI’s careers site

Who We Are

GITAI is a vertically integrated space and defense company building the next generation of hardware for low-Earth-orbit missions.

At our core is the space robotics technology that has defined GITAI from the beginning. A small, highly capable engineering team applies that foundation across satellite buses, in-orbit servicing robotics, and mission hardware for applications such as Earth observation. Today, a major focus of our work is supporting U.S. national security missions, particularly through proliferated LEO satellite constellations and other next-generation space systems.

Show full descriptionShow less

We design, build, integrate, and test much of our hardware in-house. Electrical, mechanical, software, manufacturing, integration, and test teams work closely together, allowing a small team to own complete systems rather than isolated components. This vertical integration helps us move quickly, learn directly from hardware, and shorten the path from architecture to a working system.

We are still early. The systems, the company, and the market are all being built at the same time. Requirements change, technical problems are often ambiguous, and many answers do not yet exist. We are looking for exceptional engineers and operators who want broad ownership, can work across disciplines, and are willing to stay close to the hardware until the mission succeeds.

Your Mission

The Mechanical Engineer, Space Robotics owns the end-to-end development of assigned mechanical hardware for robotic spacecraft systems, including robotic arms mounted to satellite buses, satellite bus structures, solar array mechanisms, battery system enclosures, avionics packaging, mounting structures, fixtures, and ground support equipment. This role is not limited to desk-based design. It spans concept design, CAD, drawings, prototyping, fabrication support, hands-on assembly, integration, verification testing, failure investigation, and early-stage manufacturing support. The engineer applies established design guidelines and best practices, then feeds lessons from real builds and tests back into GITAI’s mechanical design standards to accelerate development cycles.

What You’ll Drive

  • Design and iterate mechanical hardware across robotic, spacecraft, satellite, and propulsion systems, optimizing for performance, reliability, and testability.
  • Work closely with electrical and software engineers to define requirements, interfaces, and assembly configurations that are practical to build and integrate.
  • Assemble, integrate, and maintain prototypes and early builds, and feed insights back into the design to improve buildability and serviceability.
  • Plan and execute testing, including operational verification as well as reliability and quality testing, and use results to drive design improvements.

What We’re Looking For

  • Bachelor’s degree in Mechanical Engineering or a closely related discipline.
  • 1+ years of relevant experience designing, analyzing, and supporting the manufacturing of electro-mechanical systems or mechanisms. Internship, research, and extracurricular project experience counts.
  • Proficiency with mechanical CAD.
  • Experience creating mechanical drawings and maintaining drawing packages.
  • Hands-on ability with mechanical assembly, integration, and testing.
  • Flexibility to work weekends as needed based on build and test schedules.
  • Willingness to spend up to 50% of work time outside of Torrance at test sites (including Mojave and the greater Los Angeles area). Travel may increase for short periods during critical integration and test campaigns.
  • Must be a U.S. citizen, as this role may require eligibility to obtain and maintain a U.S. government security clearance in the future.

Location & Employment Details

  • Location: Torrance, CA (onsite). Travel to test sites (including Mojave and the greater Los Angeles area) is expected based on program needs.
  • Employment Type: Full-Time, Exempt
  • Salary Range: $100,000 – $155,000 per year + equity (commensurate with experience)
  • Typical Work Hours: Monday to Friday, approximately 9:00am – 6:00pm (onsite). Flexibility is expected based on mission schedules and program needs.

Benefits

  • Health Insurance – Platinum medical plan with 100% company-paid medical, dental, and vision coverage for employees; 90% for dependents
  • 401(k) Plan – Company match up to 3.5%, with traditional and Roth options
  • Equity – Stock option eligibility depending on role
  • Relocation Support – Available for qualifying positions
  • Time Off – 12 paid holidays per year, 12 days of paid vacation per year, and paid sick leave (in accordance with applicable law)
  • Office Perks – Free snacks and drinks, plus regular team events
  • Mission-Driven Culture – Work alongside passionate teammates on real space hardware
  • Cutting-Edge Work – Direct access to next-gen space robotics and flight hardware

GITAI does not accept unsolicited resumes from staffing or recruiting agencies. We work only with recruiting partners that have been specifically engaged by GITAI. No fees will be paid for resumes submitted without a prior agreement.

Compensation may include base salary or hourly pay and, depending on the position, equity. Actual compensation will be determined based on experience, skillset, and other job-related factors.

LA salary range

$100,000—$155,000 USD

Important Notice

  • Applicants must be currently authorized to work in the U.S. This role is not eligible for visa sponsorship.
  • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), GITAI Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
  • Must be able to safely lift and move items up to 40 pounds (with or without reasonable accommodation), including during assembly and test activities.
  • GITAI USA is an Equal Opportunity Employer. Employment with GITAI USA is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Something wrong with this job? Report it · This flag looks wrong