Manufacturing & Process Engineer jobs

Automation Engineer, Production Equipment

ZiplineSouth San Francisco, CAOn-sitePosted 23 days ago

$140k–$160k/yr listed by the employer

Above the typical $130k a year for mid-level Manufacturing & Process Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 99 mid-level Manufacturing & Process Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Schedule
Weekends
Degree
Bachelor's degree or equivalent

Strong: looks real and checked open today.

On Zipline’s own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Evaluate automation opportunities and translate production needs into equipment requirements.
  • Select, integrate, commission, and deploy production automation and fixtures; verify vendor-built systems and train operators.
  • Debug equipment during launches and ramp phases, perform root-cause analysis, and improve cycle time, uptime, and first-pass yield.
  • Develop tooling design standards and coordinate tooling scope, test requirements, and production schedules with internal teams.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 2+ years designing production equipment, fixtures, or custom automation in a high-volume or fast-ramping manufacturing environment
  • Hands-on experience commissioning equipment on the factory floor, including fabrication, build, debug, test, and operator training
  • Track record delivering quantitative outcomes such as cycle time, uptime, first-pass yield, or cost per unit
  • Ability to coordinate vendor builds and perform acceptance testing to technical drawings and QA criteria
  • 5–7 years of relevant experience (preferred)
  • Experience with aerospace, drones, medical devices, or safety-critical electro-mechanical products (preferred)

Education

  • Bachelor’s degree in Mechanical Engineering or equivalent practical experience

Skills

  • Demonstrated mastery of GD&T, tolerance analysis, mechanism design, material selection, and failure-mode thinking for assembly tooling
  • Proficiency in 3D CAD
  • Practical knowledge of pneumatics, actuators, sensors, linear motion, machine guarding, and industrial electrical interfaces used in tooling and small automation
  • Siemens NX experience (preferred)

Other requirements

  • Regular on-site presence at the South San Francisco manufacturing facility, availability for occasional off-hours commissioning, and up to 15% travel

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance.
Dental & vision
Dental and vision insurance.
Paid time off
Paid time off.
Equity
Equity compensation may be included in the total compensation package.
Bonus
Discretionary annual or performance bonuses may be included in the total compensation package.

Full job description

From Zipline’s careers site

About Zipline

Zipline is the world’s largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world’s largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products.

Show full descriptionShow less

Our customers include the world’s largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we’ve built to enable seamless, reliable, global operations.

Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe.

We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people’s lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds.

About You & the Role

Zipline’s Manufacturing Engineering team delivers the production systems that turn autonomous delivery aircraft and their subsystems into reliable, repeatable products at scale. As an Automation Engineer, Production Equipment based at Coop, Zipline’s South San Francisco manufacturing site, you will select, integrate, deploy, and sustain production automation for aircraft assembly, battery integration, dock components, and flight-critical subsystems. You will translate cycle-time, labor, quality, uptime, and maintainability needs into practical equipment requirements, coordinate internal and vendor builds, and bring systems into stable production through acceptance, commissioning, operator training, and continuous improvement.

This is a hands-on individual-contributor role, with direct ownership of equipment design, build, commissioning, and improvement on the factory floor. Your work determines throughput, first-pass yield, assembly cycle time, and maintenance uptime for production lines that supply field operations and live delivery fleets; mistakes affect fleet readiness and safety-critical performance.

This role is site‑based at the specified South San Francisco manufacturing facility; expect regular on‑site presence during standard manufacturing shifts, availability for occasional off‑hours commissioning, and up to 15% travel to vendor or field sites.

What You’ll Do

  • Evaluate automation opportunities against manual work content, cycle time, first-pass yield, uptime, and maintainability, and translate the chosen approach into equipment requirements.
  • Integrate automation into existing assembly workflows, verify vendor-built systems against acceptance criteria, and train operators during production deployment and scale-up.
  • Own the integration and deployment of production automation from requirements through vendor fabrication, build, commissioning, and production release; work with mechanical and controls partners on CAD (Siemens NX), detailed drawings, and equipment interfaces.
  • Deliver measurable improvements: increase tooling availability above 95%, reduce manual assembly cycle time by 20–40% per station, and improve first-pass yield (FPY) on targeted assemblies by at least 10% within the first 6–12 months of deployment.
  • Integrate and install automation incorporating alignment fixtures, press and torque tooling, ergonomic operator stations, poka‑yoke devices, handling/transport fixtures, and automated end-of-line test rigs tied to build and test specs for aircraft, battery packs, and docks.
  • Perform on-line debugging and rapid root‑cause analysis during launches and ramp phases; be prepared to run weekend or evening commissioning efforts during critical releases.
  • Develop and apply tooling design standards, GD&T practices, tolerance stacks, and material/process selections that meet safety and maintainability requirements for autonomous hardware.
  • Coordinate cross-functionally with Design Engineering, Manufacturing, Quality, Supply Chain, Test Engineering, and Field Operations to align tooling scope, test requirements, and production schedules.
  • Work directly with fabricators and vendors: write technical RFQs, evaluate proposals, verify vendor QC, and perform acceptance testing at build and after installation.

What You’ll Bring

  • 2+ years designing production equipment, fixtures, or custom automation in a high-volume or fast-ramping manufacturing environment.
  • Bachelor’s degree in Mechanical Engineering or equivalent practical experience.
  • Demonstrated mastery of GD&T, tolerance analysis, mechanism design, material selection, and failure‑mode thinking for assembly tooling.
  • Proficiency in 3D CAD; Siemens NX preferred (SolidWorks/Creo experience acceptable with strong NX learning intent).
  • Hands-on experience commissioning equipment on the factory floor: supporting fabrication, build, debug, test, and operator training; comfortable spending most of your week on-site.
  • Practical knowledge of pneumatics, actuators, sensors, linear motion, machine guarding, and industrial electrical interfaces used in tooling and small automation.
  • Track record delivering quantitative outcomes (cycle time, uptime, FPY, cost per unit) and making trade-offs between throughput, reliability, and maintainability.
  • Ability to coordinate vendor builds and perform acceptance testing to technical drawings and QA criteria.
  • Must-have traits: high ownership of safety and reliability, decisive technical judgment under schedule pressure, comfort with ambiguity and rapid iteration, and willingness to escalate and resolve issues that affect fleet readiness.

Nice to Have

  • 5–7 years of relevant experience preferred.
  • Experience with aerospace, drones, medical devices, or safety-critical electro-mechanical products is strongly preferred.

What Else You Need to Know

The starting cash range for this role is $140,000-$160,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. We are always open to negotiation. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

As set forth in Zipline ’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Something wrong with this job? Report it

Similar jobs nearby

Manufacturing Engineer

Planet · San Francisco, CA

$114k–$143k/yrFull-timeOn-site

StrongChecked open todayPosted 8 days ago

Manufacturing Engineer

ICHOR · Fremont, CA

$96k–$163k/yrFull-timeOn-site

StrongChecked open todayPosted 12 days ago

Process Engineer

Biosphere · Oakland, CA

$85k–$145k/yrOn-site

StrongChecked open todayPosted 26 days ago

Manufacturing Engineer

Atomic Machines · Emeryville, CA

$150k–$180k/yrOn-site

StrongChecked open todayPosted 1 month ago

See more like this