Assembler jobs

Senior Avionics Development Technician (Test Racks)

K2 SpaceLos Angeles, CAOn-sitePosted 1 month ago

$40–$52/hr listed by the employer

Key facts

Pay per year
≈ $83k–$108kEstimate for full-time hours.
Experience
8+ years

Strong: looks real and checked open today.

On K2 Space’s own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Build and maintain HITL test assets, including installing avionics hardware, manufacturing and routing wire harnesses, and fabricating load simulators.
  • Assemble production test racks for HITL, acceptance testing, and flight hardware qualification.
  • Perform electrical checkouts, including continuity, discontinuity, and multimeter measurements on components and vehicle systems.
  • Support design engineering with specification development, component assembly, and process validation testing.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • IPC Certified for PCB and cable harness rework (IPC-A-610, IPC-A-620) (preferred)

Experience

  • 8+ years of experience assembling, integrating, and testing electronic hardware in the aerospace industry
  • 1+ years of SMT/through-hole soldering, using electronics equipment, and assembling test racks
  • Experience designing, building, and testing electrical assemblies and test fixtures (preferred)
  • Experience performing crimping, wire stripping, continuity testing, connector pin outs, and routing and tie wrapping (preferred)
  • Experience developing or writing company specifications and qualifying build methods for production around wire harness, test rack fabrication, and integration (preferred)

Skills

  • Demonstrated skill and proficiency in soldering and crimping as well as assembling cable harnesses and connectors
  • Hand soldering ability that meets IPC J-STD-001 (preferred)
  • Ability to drill and tap holes, and use common shop equipment such as drill press, grinders, and band saws (preferred)
  • Ability to create, read, review, and redline electrical and test rack schematics (preferred)

On the job

  • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or machine controls
  • Must be able to lift and carry parts or equipment up to 50 lbs. unassisted
  • Must be able to stand for extended periods of time

Other requirements

  • Must be able to work extended hours and/or weekends as needed
  • Must be a U.S. person as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical coverage
Dental & vision
Dental and vision coverage
Parental leave
Paid parental leave
Equity
Equity in the company
Life & disability insurance
Life insurance

Also: paid time off

Full job description

From K2 Space’s careers site

K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price — and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space.

Show full descriptionShow less

The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits.

With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger — helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply.

The Role

You will contribute to the build and development of avionics and software test assets for major satellite subsystems and vehicle simulation. This role will be the owner of avionics hardware installation, wire harnessing, test rack fabrication, and HITL (Hardware-In-The-Loop) test bed build and maintenance. As an essential part of the R&D technician team, you will demonstrate diverse proficiencies across avionics products, production and industry build fundamentals, and a high level of attention to detail to ensure quality and reliability of electrical components and systems.

Responsibilities

  • Support full build and maintenance of HITL (Hardware-In-The-Loop) test assets, including installation of avionics hardware, manufacturing and routing of wire harnesses, and fabrication of load simulators
  • Assemble production test racks for HITL, acceptance testing, and qualification of flight hardware
  • Follow engineering procedures to perform electrical checkouts such as continuity, discontinuity, and multimeter measurements on components and vehicle systems
  • Assist design engineering throughout the hardware development and pre-production

stages by supporting specification development, component assembly and process validation testing

  • Work autonomously and coordinate cross-functionally with various engineering and technician team to meet high pace schedule and quality requirements
  • Successfully use an array of hand, power, and pneumatic mechanical tools to build fixtures, interfacing panels, and tooling assemblies

Qualifications

  • 8+ years of experience assembling, integrating, and testing electronic hardware in the aerospace industry
  • 1+ years of SMT/through-hole soldering, using electronics equipment, and assembling test racks
  • Demonstrated skill and proficiency in soldering and crimping as well as assembling cable harnesses and connectors

Nice to Have

  • IPC Certified for PCB and cable harness rework (IPC-A-610, IPC-A-620)
  • Hand soldering ability that meets IPC J-STD-001
  • Experience designing, building, and testing electrical assemblies and test fixtures
  • Experience performing crimping, wire stripping, continuity testing, connector pin outs, and routing and tie wrapping
  • Ability to drill and tap holes, and use common shop equipment such as drill press, grinders, and band saws
  • Ability to create, read, review, and redline electrical and test rack schematics
  • Strong communication skills with ability to communicate hardware and systems problems
  • Experience developing or writing company specifications and qualifying build methods for production around wire harness, test rack fabrication, and integration

Additional Requirements

  • Must be able to perform repetitive tasks such as bending or twisting, grasping, standing, lifting, pulling, pushing, stooping, stretching, carrying, and use hands to operate tools or machine controls
  • Must be able to lift and carry parts or equipment up to 50 lbs. unassisted
  • Must be able to stand for extended periods of time
  • Must be able to work extended hours and/or weekends as needed

Compensation and Benefits:

  • Hourly pay range for this non-exempt role is $40 - $52 + equity in the company
  • Compensation will be based on several factors including, but not limited to: knowledge and skills, education, and experience level
  • Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks

If you don’t meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged!

Export Compliance

As defined in the ITAR, “U.S. Persons” include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a “U.S. Person.”

The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a “U.S. person” as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license.

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know.

Equal Opportunity

K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Something wrong with this job? Report it

Similar jobs nearby

See more like this