Quality Control Inspector jobs

Quality Inspector

HermeusLos Angeles, CAFull-timeOn-sitePosted 12 months ago

$30–$50/hr listed by the employer

Key facts

Pay per year
≈ $62k–$104k
Above the typical $69k a year for mid-level Quality Control Inspector jobs in CaliforniaHow we compare

How we compare. ≈ $62k–$104k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 70 mid-level Quality Control Inspector jobs in California that list pay, from the employers' own postings. About means within 5%.

Experience
3+ years
Degree
Associate degree or equivalent

Looks real and checked open today.

On Hermeus’ own careers site (Lever).

  • Checked: On the company's own careers siteLever board
  • Checked: Checked open todayLever board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundLever board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Inspect mechanical and welded parts and assemblies using dimensional and visual inspection methods.
  • Verify parts against engineering drawings, models, specifications, and GD&T requirements, including in-process, first-article, and final inspections.
  • Create and maintain inspection reports, non-conformance records, and traceability documentation.
  • Work with manufacturing and engineering teams to investigate non-conformances and develop corrective actions.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3+ years of hands-on mechanical inspection experience in aerospace, defense, or high-precision manufacturing
  • Experience inspecting tight-tolerance metallic components such as machined, welded, fluids components, or sheet metal assemblies
  • CMM programming experience, such as PC-DMIS or Verisurf (preferred)
  • Familiarity with ISO 9001, AS9100, or equivalent quality management systems (preferred)
  • Experience in a high-mix, low-volume production environment with rapid iteration cycles (preferred)
  • Hands-on experience with laser trackers and/or related software (preferred)

Education

  • High school diploma or equivalent
  • Associate degree or technical certification in mechanical inspection, manufacturing, or metrology (preferred)

Skills

  • Working knowledge of GD&T (ASME Y14.5) and ability to interpret complex engineering drawings
  • Knowledge of NDT methods, including visual, dye penetrant, radiographic, or ultrasonic inspection (preferred)
  • Proficiency with ERP or quality management software such as NetSuite, SAP, or Solumina (preferred)
  • Proficiency with precision measurement tools and metrology equipment, including CMMs and optical measurement systems (preferred)

On the job

  • Willingness to work hands-on on the manufacturing floor daily
  • Ability to lift up to 25 lbs and work around industrial equipment as needed

Other requirements

  • Must be a U.S. person as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
100% employer-paid healthcare
Retirement plan
401(k) retirement plan
Paid time off
12 federal holidays; unlimited PTO for exempt employees and generous accrued PTO for non-exempt employees
Parental leave
Paid parental leave
Equity
Stock options
Bonus
Potential year-end bonuses
Meals
Weekly paid office lunches and fully stocked breakrooms
Other
Pet insurance

Full job description

From Hermeus’ careers site

Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage.

About The Role:

Show full descriptionShow less

We are seeking a Quality Inspector to join our growing team and ensure the highest level of quality and reliability across all hardware produced at our facility. As one of the first inspectors on-site, you will play a key role in establishing inspection standards, methods, and processes to support the production of precision aerospace and defense components.

This position requires a highly detail-oriented, hands-on professional with a deep understanding of mechanical inspection, precision measurement, and documentation practices. You’ll work directly with manufacturing, quality engineering, and design teams to ensure all parts meet dimensional and process conformance requirements — from prototype through production.

Responsibilities

  • Perform dimensional and visual inspections on complex mechanical and welded components using precision measurement tools and equipment (e.g., calipers, micrometers, height gauges, CMM, FARO arm).  - Verify parts and assemblies against engineering drawings, models, and specifications using GD&T principles.  - Conduct in-process, first-article, and final inspections, ensuring all product meets design and process requirements prior to release.  - Review and interpret engineering drawings, work orders, and technical documentation to identify inspection criteria.  - Create, complete, and maintain inspection reports, non-conformance documentation, and traceability records in accordance with internal quality standards.  - Collaborate cross-functionally with manufacturing engineers, technicians, and quality engineers to drive root cause analysis and corrective action on non-conformances.  - Assist in the development of inspection methods, tooling, and quality procedures to improve efficiency and repeatability.  - Support supplier part verification and incoming inspection for purchased or outsourced components.  - Maintain and calibrate inspection tools and gages in compliance with calibration schedules and quality system requirements.  - Contribute to a continuous improvement culture focused on process capability, accuracy, and throughput. 

Requirements

  • High school diploma or equivalent required; associate degree or technical certification in mechanical inspection, manufacturing, or metrology preferred.  - 3+ years of hands-on experience in mechanical inspection within aerospace, defense, or high-precision manufacturing environments.   - Working knowledge of GD&T (ASME Y14.5) and the ability to interpret complex engineering drawings.  - Experience inspecting tight-tolerance metallic components such as machined, welded, fluids components, or sheet metal assemblies.  - Proven ability to document, communicate, and resolve quality issues effectively in collaboration with engineering teams. 

Preferred Skills and Experience

  • Experience with CMM programming (PC-DMIS, Verisurf, or similar).  - Familiarity with ISO 9001, AS9100, or equivalent quality management systems.  - Knowledge of NDT methods (visual, dye penetrant, radiographic, or ultrasonic inspection).  - Experience working in a high-mix, low-volume production environment with rapid iteration cycles.  - Proficiency with ERP or quality management software systems (e.g., NetSuite, SAP, or Solumina).  - Strong communication and documentation skills with the ability to work independently in a fast-paced environment.  - Proficiency with precision measurement tools and metrology equipment, including CMMs and optical measurement systems. - Hands on experience with Laser trackers and/or software

Physical Requirements:

  • Must be willing to be hands-on on the manufacturing floor daily.  - Ability to lift up to 25 lbs and work around industrial equipment as needed.  - Flexible schedule may be required to support production priorities and critical milestones. 

The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs. At Hermeus, compensation is only one part of our total rewards package. We offer competitive pay, equity, and a range of benefits designed to support our team. Benefits: Health & Wellness: 100% employer-paid healthcare and pet insurance Financial: Competitive pay, stock options, 401(k) retirement plan, and potential year-end bonuses Time Off: Paid parental leave, 12 federal holidays, unlimited PTO for exempt employees, and generous accrued PTO for non-exempt employees Office Perks: Weekly paid office lunches and fully stocked breakrooms

U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. US persons include U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending.

#LI-JC3

EQUAL OPPORTUNITY Hermeus is an Equal Opportunity Employer. Employment decisions at Hermeus are based solely on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior Quality Inspector

Rocket Lab Corporation · Long Beach, CA

$33–$41/hrOn-site

StrongChecked open todayPosted 11 days ago

Quality Inspector

Precision Resource · Huntington Beach, CA

$23–$26/hrFull-timeOn-site

StrongChecked open todayPosted 20 days ago

Quality Inspector

Precision Resource · Huntington Beach, CA

$23–$26/hrFull-timeOn-site

StrongChecked open todayPosted 20 days ago

See more like this