Quality Control Inspector jobs

Production Test Technician

CHAOS IndustriesEl Segundo, CA +1 placeOn-sitePosted 1 month ago

$30–$48/hr listed by the employer

Key facts

Pay per year
≈ $62k–$100k
Above the typical $69k a year for mid-level Quality Control Inspector jobs in CaliforniaHow we compare

How we compare. ≈ $62k–$100k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 70 mid-level Quality Control Inspector jobs in California that list pay, from the employers' own postings. About means within 5%.

Where
El Segundo, CA · Los Angeles, CA · on-site
Experience
2+ years
Degree
Associate degree or equivalent
Clearance
Security clearance required

Strong: looks real and checked open today.

On CHAOS Industries’ own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Move and stage radar systems, set them up in the test configuration, and connect power, network, and signal interfaces.
  • Power up systems and verify peripherals and interfaces, including dishes, heading modules, connectivity, modems, and UPS.
  • Use the radar software interface and documented procedures to check system health and determine pass/fail status.
  • Track serialized units, configurations, test steps, results, and defects; coordinate part replacements with production.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • IPC-A-610, IPC J-STD-001, or ETA CET certification, or willingness to earn one (preferred)

Experience

  • 2+ years in an electronics manufacturing, test, integration, or equipment-maintenance environment
  • Diligent documentation habits, including accurate logging of serial numbers, configurations, test results, and defects
  • Experience in a regulated/defense/aerospace hardware environment (preferred)
  • Experience with defect-tracking, MES, or production systems, such as serialized unit tracking (preferred)
  • ESD-controlled environment experience (preferred)

Education

  • Associate degree in electronics/electrical technology, or equivalent military electronics/avionics training, trade school, or hands-on work experience

Skills

  • Hands-on comfort assembling, connecting, and disassembling hardware using common hand tools
  • Comfortable connecting and troubleshooting electrical and signal interfaces (cables, connectors, network, power) and reading basic diagrams/procedures
  • Comfortable operating software/computer interfaces to run tests and read status
  • Hands-on familiarity with RF systems, antennas, networking, or power systems (preferred)
  • Comfort with Linux or command-line tools (preferred)

On the job

  • Able to safely lift/move heavy equipment with mechanical assistance and stand and work with hardware for extended periods

Other requirements

  • Active security clearance (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical benefits 100% paid for by the company, FSA, HSA, and life insurance
Dental & vision
Dental and vision benefits 100% paid for by the company
Retirement plan
401(k) with a 50% company match up to 6% of pay
Paid time off
Unlimited PTO
Equity
Generous pre-IPO stock option grants
Bonus
Annual bonuses planned, coming soon
Meals
Free daily lunch while working onsite and a fully stocked kitchen
Relocation help
Relocation assistance

Full job description

From CHAOS Industries’ careers site

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats.

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, and London. For more information, please visit www.chaosinc.com.

About the Role

Show full descriptionShow less

This is a hands-on hardware role. You'll be physically moving, powering up, connecting, and exercising full radar systems — two large equipment chassis (200+ lbs each) with external peripherals — and using our software interface to confirm every part of the system is healthy before it moves to the next stage of test. When you find a bad part, you'll log it, get it replaced through our production team, and keep the unit moving. You are the person who makes sure nothing ships broken and that test never stalls. You do not need a radar, RF, or software-engineering background. You need to be methodical, physically capable, comfortable with hardware and basic test tools, and reliable about documentation and communication. We'll teach you the radar.

Responsibilities:

-

Move and stage systems. Safely transport radar chassis (200+ lbs, with mechanical assistance/lift equipment) into and out of the test area, and set them up in the test configuration.

-

Power up and bring online. Fully power up a radar system, connect all power, network, and signal interfaces, and bring the system to an operational state following documented procedures.

-

Check out all peripherals. Connect and verify every external module and interface on the system — point-to-point (P2P) dishes, compass/heading module, network upload, satellite (Starlink) connectivity, 5G modem, UPS, and other I/O — confirming each functions correctly.

-

Operate the radar UI for health and status. Use our software interface to read system health and status, identify whether anything is wrong, and determine pass/fail against the test procedure — no coding required, but comfort navigating software tools is a must.

-

Track exactly what you're testing. Keep diligent, accurate records of which serialized unit and configuration you're working on and what step it's at. Serial-number and configuration discipline is critical.

-

Log defects and drive replacement. When you find a bad part or a failed interface, log it in our production/defecttracking system, communicate clearly with the production team to get the part replaced, and keep the unit progressing through test.

-

Keep the line moving. Coordinate with engineers and production so testing doesn't stall waiting on parts, equipment, or information. Flag blockers early.

-

Maintain a clean, organized, safe test area. Manage cables, equipment, and the work space; follow ESD and electrical-safety practices.

Why this role matters:

Testing is the gate every radar passes through before it reaches the field. As we scale, the test team is the difference between shipping fast and shipping broken. This role takes the heavy, hands-on system-checkout work off the engineers' plates so the whole line runs faster — you'll directly enable us to qualify more systems than the company ever has.

Minimum Requirements:

-

Associate degree in electronics/electrical technology, or equivalent military electronics/avionics training, trade school, or hands-on work experience.

-

2+ years in an electronics manufacturing, test, integration, or equipment-maintenance environment (military/field maintenance experience counts).

-

Hands-on comfort assembling, connecting, and disassembling hardware using common hand tools.

-

Comfortable connecting and troubleshooting electrical and signal interfaces (cables, connectors, network, power) and reading basic diagrams/procedures.

-

Comfortable operating software/computer interfaces to run tests and read status (you'll learn ours; you don't need to write code).

-

Diligent documentation habits — accurate logging of serial numbers, configurations, test results, and defects.

-

Clear communicator — able to coordinate with production and engineering to move parts and resolve blockers.

-

Able to safely lift/move heavy equipment with mechanical assistance, and to stand and work with hardware for extended periods.

-

Detail-oriented, methodical, and reliable about following procedures exactly.

Preferred Requirements:

-

Experience in a regulated/defense/aerospace hardware environment.

-

Familiarity with RF systems, antennas, networking, or power systems at a hands-on level.

-

IPC-A-610, IPC J-STD-001, or ETA CET certification (or willingness to earn).

-

Experience with defect-tracking / MES / production systems (e.g., serialized unit tracking).

-

ESD-controlled environment experience.

-

Comfort with Linux or command-line tools (we use them, but we'll train).

-

Active security clearance.

Why CHAOS?

  • Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
  • Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
  • Our Perks: Free daily lunch while you're working onsite, fully-stocked kitchen, unlimited PTO, casual dress code
  • Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
  • Team Growth: 500+ employees and counting across 5 global offices

Compensation Range: $30.00/hour - $48.00/hour

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations.

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

Something wrong with this job? Report it

Similar jobs nearby

Test Technician III

Rocket Lab Corporation · Long Beach, CA

$28–$35/hrOn-site

StrongChecked open todayPosted 12 days ago

Materials Test Technician

Divergent · Long Beach, CA +1 place

$24.06–$44.11/hrFull-timeOn-site

StrongChecked open todayPosted 17 days ago

See more like this