Electrical Engineer jobs

Senior Wireless Engineer

Neros TechnologiesTorrance, CABachelor's degreePosted 1 month ago

$187k–$262k/yr listed by the employer

Above the typical $180k a year for senior Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 513 senior Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Looks real and checked open today.

On Neros Technologies’ own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Implement modem and physical-layer blocks from MATLAB/Simulink models in RTL and embedded C.
  • Convert floating-point models to fixed point and analyze quantization, precision, and dynamic-range trade-offs.
  • Build bit- and cycle-accurate testbenches to verify RTL and C against MATLAB/Simulink reference models.
  • Close FPGA timing and optimize LUT, DSP, and BRAM use; partition signal processing between FPGA fabric and embedded processors.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 7+ years implementing DSP or communications algorithms in RTL (Verilog/VHDL) and/or embedded C for FPGA or SoC targets
  • Experience with fixed-point conversion and bit-true implementation from MATLAB/Simulink models
  • Experience building testbenches and verifying implementations against a golden reference model
  • Hands-on implementation of an end-to-end modem (OFDM, spread spectrum, or single-carrier) shipped in hardware (preferred)
  • Zynq, RFSoC, or similar SoC integration, including AXI interfaces and hardware/software co-design (preferred)
  • Hardware implementation of LDPC, Turbo, Viterbi, or Reed-Solomon decoders (preferred)

Education

  • Bachelor of Science in Electrical Engineering, Computer Engineering, or a related field
  • Master's degree (preferred)

Skills

  • Strong DSP and digital communications fundamentals: modulation, synchronization, equalization, filtering, and FEC/channel coding
  • Proficiency with FPGA design flow: simulation, synthesis, timing closure, and resource optimization (Vivado/Vitis or Quartus)
  • Generating or hand-optimizing HDL and C from Simulink using MATLAB HDL Coder and Embedded Coder (preferred)
  • Understanding of the RF front-end, data converters (ADC/DAC), and software-defined radio pipelines (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Highly competitive equity grants are considered part of total compensation.

Full job description

From Neros Technologies’ careers site

Who we are

Neros is a defense technology company rebuilding America’s drone industrial base. We design and manufacture high-performance unmanned systems that are tested in combat, iterated at startup speed, and built at massive scale. Our team culture is fast, hands-on, and obsessed with closing the gap between design and deployment.

As drones transform the character of warfare, Neros is delivering the systems the West needs to compete on the modern battlefield and deter the adversaries of democracy. We’re hiring engineers, operators, and builders who want to move fast, take on extreme ownership, and get capability into the hands of warfighters in months, not years.

What you will be doing

Show full descriptionShow less

As a Senior Wireless Engineer, you will turn our modem and waveform designs into real, deployable hardware. Working directly under our Senior Wireless Systems Engineer II, you will take MATLAB/Simulink models of the physical layer and implement them as bit-true, fixed-point designs in C and RTL for our FPGAs and SoCs. You will own fixed-point conversion, verification against the golden reference, and FPGA timing and resource optimization — getting real waveforms onto our drones and working over the air.

Responsibilities

  • Implement modem and physical-layer blocks — modulation/demodulation, synchronization, equalization, and channel coding/FEC — from MATLAB/Simulink models into RTL (Verilog/VHDL) and embedded C
  • Own fixed-point conversion from floating-point models, analyzing quantization, precision, and dynamic-range trade-offs
  • Build bit- and cycle-accurate testbenches that verify RTL and C implementations against the MATLAB/Simulink golden reference
  • Close timing and optimize LUT, DSP, and BRAM utilization on Xilinx/AMD (or Intel) FPGAs and SoCs
  • Partition the signal chain between FPGA fabric and embedded processor, co-designing the hardware/software boundary
  • Debug the physical layer on captured and live signals alongside the communication systems, RF, and firmware teams, working directly with the Principal Communications Systems Engineer to take waveforms from model to silicon

You should have the following

  • Bachelor of Science in Electrical Engineering, Computer Engineering, or a related field required; Master's degree highly preferred
  • 7+ years implementing DSP or communications algorithms in RTL (Verilog/VHDL) and/or embedded C for FPGA or SoC targets
  • Strong DSP and digital communications fundamentals: modulation, synchronization, equalization, filtering, and FEC/channel coding
  • Demonstrated experience with fixed-point conversion and bit-true implementation from MATLAB/Simulink models
  • Proficiency with the FPGA design flow: simulation, synthesis, timing closure, and resource optimization (Vivado/Vitis or Quartus)
  • Experience building testbenches and verifying implementations against a golden reference model

Nice to have

  • Model-Based Design: Generating or hand-optimizing HDL and C from Simulink using MATLAB HDL Coder and Embedded Coder
  • Wireless Modems: Hands-on implementation of an end-to-end modem (OFDM, spread spectrum, or single-carrier) that shipped in hardware
  • SoC Integration: Zynq, RFSoC, or similar SoCs, including AXI interfaces and hardware/software co-design
  • RF/SDR Familiarity: Understanding of the RF front-end, data converters (ADC/DAC), and software-defined radio pipelines
  • Advanced FEC: Hardware implementation of LDPC, Turbo, Viterbi, or Reed-Solomon decoders

US Salary Range

$187,000 – $261,500 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Neros' total compensation package.

We’re an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior FPGA Engineer II

Rocket Lab Corporation · Long Beach, CA

$143k–$215k/yrOn-site

StrongChecked open todayPosted 15 days ago

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 7 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 9 days ago

See more like this