Manufacturing & Production jobs

Manufacturing Fabricator

Whisper AeroCrossville, TNOn-site5+ years experiencePosted 8 days ago

Pay not listed

Looks real. 1 thing to check before you apply.

On Whisper Aero’s own careers site (Greenhouse), checked open today.

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Fabricate, modify, and assemble metallic and composite aircraft parts, structures, and prototype hardware from drawings and specifications.
  • Install and integrate aircraft mechanical, electromechanical, propulsion, fluid, thermal, and related systems.
  • Build and modify fixtures, tooling, ground support equipment, and test articles; prepare hardware for testing and support post-test modifications.
  • Work with engineering teams to resolve build issues, provide manufacturability feedback, and support prototype iterations.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of relevant hands-on experience in fabrication, aircraft assembly, vehicle prototyping, industrial maintenance, motorsports, precision metalwork, or a comparable technical trade
  • Ability to collaborate across engineering and manufacturing teams, document completed work, and adapt to changing prototype priorities
  • Fabrication or assembly of aerospace structures, experimental aircraft, UAVs, spacecraft, or advanced vehicle prototypes (preferred)
  • Experience with sheet-metal forming/riveting, composite trimming/bonding, manual machining, or precision fixture fabrication (preferred)
  • Experience integrating propulsion, fluid, electrical, harness, thermal, or mechanical subsystems and supporting functional or ground tests (preferred)
  • Experience building GSE, structural fixtures, test stands, or instrumented engineering test articles (preferred)
  • Familiarity with AS9100D practices, controlled work instructions, inspection plans, FOD prevention, nonconformance controls, and configuration management (preferred)

Education

  • High school diploma or GED equivalent

Skills

  • Ability to interpret technical drawings, dimensions, tolerances, and assembly instructions
  • Ability to use calipers, micrometers, measuring tools, and common fabrication equipment
  • Proficiency with hand and power tools and at least one fabrication discipline
  • Ability to troubleshoot fit-up and build challenges while following established safety and quality processes
  • TIG/MIG welding experience (preferred)
  • Experience using CAD viewing tools, ERP/MES, or digital work management systems such as Jira (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive benefits package with at least 90% of plan costs employer-paid for employees and dependents; optional HSA/FSA accounts
Retirement plan
401(k)
Paid time off
Starting at four weeks of paid time off for vacation, sick, and personal days, plus federal holidays
Bonus
End-of-year bonuses for eligible employees
Learning & tuition
Professional development stipend
Meals
Beverages and snacks available throughout the day; paid team meals based on office demands
Relocation help
Relocation assistance

Full job description

From Whisper Aero’s careers site

Our Company

Show full descriptionShow less

Whisper Aero is pioneering a more compelling and connected future by delivering cleaner, quieter, and more efficient propulsion solutions. Today's open rotor propulsion systems are challenged by safety, noise, and performance limitations at all scales. Whisper's breakthrough technologies allow aircraft to fly anywhere at any time without disturbing communities, at greater speeds, and with incredible improvements in efficiency and cost. Their innovations also enable a new generation of air moving products that can blend into the soundscapes of daily life. Whisper was founded by industry veterans, Mark Moore and Ian Villa, and continues to innovate a future that’s as considerate as it is compelling with its world-class team in Tennessee.

About the Role

Whisper Aero is seeking a hands-on Manufacturing Fabricator to build, modify, assemble, and integrate hardware supporting the development of advanced aircraft and electric propulsion systems. This role spans aircraft structures and components, installation of mechanical and electromechanical systems, prototype and qualification test articles, and the ground support equipment (GSE) needed to safely assemble, handle, and test that hardware.

Working alongside Design Engineering, Manufacturing Engineering, Test, and Quality, you will translate drawings and build instructions into safe, reliable physical hardware. The ideal candidate is a resourceful fabricator who can move between one-off development work and repeatable, revision-controlled builds while maintaining aerospace-grade workmanship and documentation.

What You’ll Do

Aircraft Structures & Component Fabrication

  • Fabricate, fit, trim, drill, ream, deburr, finish, and assemble metallic and composite aircraft parts and structural subassemblies using approved processes.
  • Build and modify brackets, panels, mounts, airframe structures, ducts, enclosures, and other prototype or production-intent hardware from engineering drawings and specifications.
  • Operate appropriate shop equipment and hand/power tools; use fixtures, templates, and precision measurement tools to achieve required alignment, fit, and dimensional accuracy.

Aircraft Assembly & Systems Integration

  • Support installation and integration of mechanical, electromechanical, propulsion, thermal, fluid, and associated aircraft systems in coordination with the responsible engineering teams.
  • Install and secure components, tubing, brackets, cable and harness routing provisions, fasteners, and interfaces to released instructions; assist with fit checks and system checkout under approved procedures.
  • Identify interferences, assembly constraints, and serviceability concerns early, and partner with Engineering on manufacturable solutions.

Ground Support Equipment (GSE), Tooling & Test Articles

  • Fabricate and modify assembly fixtures, alignment tools, handling carts, stands, lifting/transport interfaces, test rigs, and other GSE used for build and test activities.
  • Build representative structural and systems test articles to support design validation, instrumentation installation, ground testing, and engineering investigations.
  • Prepare test hardware for use; support setup, safe configuration, inspections, and post-test modifications in accordance with approved plans and safety controls.

Engineering Development & Manufacturing Execution

  • Collaborate with engineers to plan fabrication steps, resolve design-to-build issues, and support rapid prototype iterations without bypassing configuration or approval controls.
  • Read and interpret engineering drawings, CAD views, bills of material, work instructions, and revision changes; accurately record work and issues in applicable systems.
  • Contribute feedback on design for manufacturability, assembly sequence, tooling needs, cycle time, and repeatable fabrication methods.

Quality, Safety & Continuous Improvement

  • Perform in-process dimensional and visual checks; maintain part identification, traceability, and complete build records consistent with applicable AS9100D processes.
  • Escalate nonconforming conditions and obtain authorized dispositions before rework, repair, or incorporation into aircraft or test hardware.
  • Follow shop safety practices including PPE, foreign object debris (FOD) control, tool accountability, equipment inspection, and safe lifting/handling; maintain an organized work area.

Basic Qualifications

  • High school diploma or GED equivalent.
  • 5+ years of relevant hands-on experience in fabrication, aircraft assembly, vehicle prototyping, industrial maintenance, motorsports, precision metalwork, or a comparable technical trade; equivalent vocational training plus strong practical experience considered.
  • Ability to interpret technical drawings, dimensions, tolerances, and assembly instructions, and to use calipers, micrometers, measuring tools, and common fabrication equipment.
  • Proficiency with hand and power tools and at least one fabrication discipline (e.g., sheet metal, welding, composites, machining, or precision mechanical assembly).
  • Demonstrated ability to troubleshoot fit-up and build challenges while following established safety and quality processes.
  • Ability to collaborate across engineering and manufacturing teams, document completed work, and adapt to changing prototype priorities.

Preferred Qualifications

  • Fabrication or assembly of aerospace structures, experimental aircraft, UAVs, spacecraft, or advanced vehicle prototypes.
  • TIG/MIG welder with experience on sheet-metal forming/riveting, composite trimming/bonding, manual machining, or precision fixture fabrication.
  • Experience integrating propulsion, fluid, electrical, harness, thermal, or mechanical subsystems and supporting functional or ground tests.
  • Experience building GSE, structural fixtures, test stands, or instrumented engineering test articles.
  • Familiar with AS9100D practices, controlled work instructions, inspection plans, FOD prevention, nonconformance controls, and configuration management.
  • Tool use of CAD viewing tools, ERP/MES, or digital work management systems such as Jira.

Benefits:

  • Top-tier Benefits: Employee-first focused comprehensive benefits package, minimum of 90% employer-paid plans for employees and dependents with optional HSA/FSA account offerings
  • PTO & Federal Holidays: Starting at four weeks of paid time off for vacation, sick, and personal days
  • Competitive Salary: Value-based compensation, plus enjoy Tennessee’s no-income-tax life
  • End of Year Bonuses: For eligible employees
  • We always have beverages and snacks available to energize you throughout the day, with paid team meals based on office demands.
  • 401(k)
  • Relocation Assistance
  • Professional Development Stipend

Whisper Aero is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws. Whisper Aero also participates in E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each applicant's Form I-9 to confirm work authorization.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Manufacturing Associate

Laborup · Morristown, TN +2 places

$15/hrFull-timeOn-site

StrongChecked open todayPosted 19 days ago

Welder / Fabricator

Laborup · Morristown, TN

$21–$23/hrFull-timeOn-site

StrongLast seen open yesterdayPosted 29 days ago

Fabricator

American Bridge Company · Coraopolis, PA

Full-timeOn-site

StrongPay not listedChecked open todayPosted 20 days ago

See more like this