Mechanical Engineer jobs

Structural Engineer, Thermofluids

FluidstackAustin, TX +4 placesFull-timeHybrid

$210k–$260k/yr listed by the employer

Key facts

Where
Austin, TX · New York, NY · San Francisco, CA · Los Angeles, CA · Seattle, WA · hybrid
Experience
10+ years

Looks real. 1 thing to check before you apply.

On Fluidstack’s own careers site (Ashby), checked open today.

  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Analyze impeller and rotor stress, casing and pressure containment, and packaged-unit load paths.
  • Design pressure-containing structures from initial calculations through fabricated hardware.
  • Perform rotordynamic and modal analysis, including critical speeds, whirl, and the magnetic bearing interface.
  • Design containment cases to keep energetic failures inside the machine.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Professional Engineer license (preferred)

Experience

  • 10+ years of experience in structural analysis and design of rotating and pressure-containing hardware, including FEA, rotordynamics, and containment
  • Taken a pressure-containing design from calculation through to a fabricated article
  • Run FEA on rotating hardware and correlated it against strain gauge, spin-pit, or test data
  • Owned a containment or burst case and justified its safety
  • Worked on modal and critical-speed analysis with the aerodynamic design engineer early enough to influence both designs
  • Signed off a structure that was built and attended its first loading
  • Flight and propulsion structures, including spin-pit testing, burst margin, and containment (preferred)
  • High-cycle fatigue and fracture on rotating hardware (preferred)

Skills

  • Rotordynamics and bearing dynamics (preferred)
  • Pressure vessel and containment design (preferred)

Other requirements

  • Available for regular travel of 25% or more, depending on business needs
  • Austin, TX location (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Fluidstack’s careers site

ABOUT FLUIDSTACK

We exist to make humanity more free. For most of human history, you farmed or you starved. Technology gave people more time for the things they wanted to do, instead of things they had to do. Powerful AI will be the biggest lever for human choice we've ever built - but only if models are aligned with what humanity actually wants. There are groups building AI who don't share these goals. Whoever deploys frontier compute infrastructure fastest will decide whether AI expands human freedom or shrinks it.

Show full descriptionShow less

We're singularly focused on delivering 10 to 100s of GWs of compute faster than anyone else, rethinking every layer of the stack. We acquire power, design and build data centers, and operate them - with teams spanning hardware and software. Speed and scale are our key differentiators. Come be a part of building civilization-scale infrastructure for AI.

We hire people who care deeply about this problem space. If that is you, please apply!

HOW WE OPERATE

  • Be a barrel. Full autonomy. Own things end to end, take on scope without being asked, no permission required to operate outside your core role.
  • Insane urgency. We drive everything forward as fast as possible.
  • Reason from first principles. Challenge every assumption. Zero analogy thinking, no egos, the best idea wins.
  • Love of the game. The frontier of AI is the most interesting problem of our time. We put in long hours at high intensity to push the frontier forward.
  • Build something that actually matters. If you're going to spend your time, spend it on something that matters to the world.

THE THERMOFLUIDS R&D TEAM

Examples of key problems the team is working on

  • Reject 10s of GW of heat, starting now. Fluidstack is targeting 10s of GW of compute over the next two years. Every watt of it becomes heat that has to go somewhere, and no cooling team has ever been asked to open at that scale rather than grow into it.
  • Design and build the machines, because nobody can supply them. The merchant compressor market cannot deliver at this rate, and the vendor base behind today’s chillers will not scale to gigawatts. We are taking compressor and chiller design in house, working on machine architectures nobody sells today, and going from blank sheet to production faster than this industry thinks is possible.
  • Own every thermofluids problem behind the fleet, not just the chiller. Working fluid and cycle architecture, heat exchangers at a scale that dominates the cost of the plant, two-phase heat transfer at the chip, and thermal energy storage. All of it is open, and whatever this team lands gets built thousands of times.

ROLE SCOPE

  • Own the structural analysis of the machine: impeller and rotor stress, casing and pressure containment, and the load paths through the packaged unit.
  • Design the pressure-containing structures, and carry them from first calculation to hardware people are willing to stand next to.
  • Run the rotordynamic and modal work alongside the turbomachinery engineer, covering critical speeds, whirl and the magnetic bearing interface.
  • Design the containment case, so an energetic failure at speed stays inside the machine.
  • Design the test cell structures and fixturing that carry the article, the drive and the loop under load.

WHAT WE'RE LOOKING FOR

The below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would https://jobs.ashbyhq.com/fluidstack/05c2e69c-42f9-4fcb-9cf0-a467aaf98f1c.

  • 10+ years of experience in structural analysis and design of rotating and pressure-containing hardware, including FEA, rotordynamics, and containment.
  • You’ve taken a pressure-containing design from calculation through to a fabricated article, and it held.
  • You’ve run FEA on rotating hardware and correlated it against strain gauge, spin-pit or test data rather than trusting the model.
  • You’ve owned a containment or burst case and made the argument for why it holds to people whose safety depended on it.
  • You’ve worked the modal and critical-speed problem jointly with whoever designed the aerodynamics, early enough to change both.
  • You’ve signed off a structure that got built, and you were there when it was first loaded.
  • You're comfortable with regular travel: expect 25% or more, depending on business needs.
  • Most of our engineering team, stakeholders, and work are based in Austin, TX, and we value working in person. We have a strong preference for Austin and run a hybrid model, but we're open to other locations for the right role and candidate.
  • Bonus: Flight and propulsion structures (spin pit testing, burst margin, containment). Rotordynamics and bearing dynamics. High-cycle fatigue and fracture on rotating hardware. Pressure vessel and containment design. Professional Engineer license.

We are committed to pay equity and transparency.

You will receive a confirmation email once your application has successfully been accepted. If there is an error with your submission and you did not receive a confirmation email, please email careers@fluidstack.io with your resume/CV, the role you've applied for, and the date you submitted your application-- someone from our recruiting team will be in touch.

Fluidstack is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans’ status, or any other characteristic protected by law. Fluidstack will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

Applicant Privacy Notice https://fluidstack.io/legal/applicant-privacy-notice AI Screening Notice https://fluidstack.io/legal/ai-screening-notice Ashby Bias Audit https://fluidstack.io/legal/ashby-bias-audit

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Mechanical Engineer

Stantec · Austin, TX

Hybrid

StrongPay not listedChecked open todayPosted 1 month ago

Mechanical Engineer

Emerson · Austin, TX

Hybrid

StrongPay not listedChecked open todayPosted 1 month ago

Thermal Engineer

Last Energy · Austin, TX

Full-timeOn-site

StrongPay not listedChecked open todayPosted 1 month ago

Mechanical Engineer

Infinitum · Austin, TX

Full-timeHybrid

StrongPay not listedChecked open todayPosted 1 month ago

Engineer, Mechanical

Hyliion · Austin, TX

Pay not listedOn-site

Strong2 to checkChecked open todayPosted 2 months ago

See more like this